Hot 
Short (50 mm) intake manifold with 17 mm diameter for mopeds / mopeds with manual Sachs 503 2AL or 2BL engine. The intake manifold also fits some AAL and ABL automatic engines, depending on where the mounting bracket for the side guard is positioned on the frame.
This tuning spigot with a connection diameter of 23 mm makes it possible to get the full performance potential out of the swiing® SRF 17 mm carburetor.
For easier installation, M6 nuts with reduced key width and matching washers are already included in the scope of delivery. An O-ring is also included to ensure a reliable seal between the carburettor and the connecting piece.
| Manufacturer | swiing® ingenious parts |
| Material | Aluminum |
| Ø inside | 17 mm |
| Ø External connection | 23 mm |
| Thread type | M6x1 (standard thread) |
| Hole spacing inlet | 32 mm |
| Number of fixing points | 2 pcs |
| Area of application | Tuning, Racing |
| Total length | 50 mm |
| Alternative version of the Pony OEM number | A2177 |
| Sachs | 503 - AAL, ABL, 2AL / 2BL |
Ratings
Accessories & related products
Magura set screw M6x34 mm lock nut SW8
Slotted: No · Width across flats Screw: 8 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Ø cable holder: 3.05 mm · Surface: galvanized (blue) · Surface: nickel-plated · Ø Receptacle: 7.05 mm · Thread type: M6x1 (standard thread) · Width across flats nut: 8 mm · Total length: 34 mm · Thread length: 24 mm
CHF 2.50
swiing® ingenious 15 mm intake manifold long version | Sachs 503 2AL, 2BL
Manufacturer: swiing® ingenious parts · Camouflaged: No · Material: Aluminum · Ø inside: 15 mm · Ø External connection: 20 mm · Thread type: M6x1 (standard thread) · Total length: 70 mm · Mounting type: Screws · Total height: 80 mm · Number of fixing points: 2 pcs · Height flange center hole: 70 mm · Area of application: Tuning · Hole spacing inlet: 32 mm · Pony OEM number: A2176
CHF 59.90
Hot
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Sachs 503 AAL, 2AL/2BL, ABL, AB, AC, ADV
Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SRE · Nominal diameter: 17 mm · Ø Inside entrance: 17 mm · Total length: 64.8 mm · Ø Output inside: 17.1 mm · Height: 89 mm · Height: 110 mm · Ø Air filter connection: 27.5 mm · Width: 47 mm · Mounting type: Plug connection clamped · Ø Internal connection: 23 mm · Ø fuel hose connection: 5 mm · Mixed oil connection: No · Area of application: Tuning · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.2 · Nozzle size: 74 · Clamping screw torque (max.): 3 N/m
CHF 119.90
Hot
swiing® ingenious 17 mm SRF carburetor camouflaged | Sachs 503, Puch Velux
Nominal diameter: 17 mm · Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SRF · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 5 mm · Nozzle size: 74 · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Total length: 61.5 mm · Mounting type: Plug connection clamped · Ø Output inside: 17.1 mm · Height: 89 mm · Height: 112 mm · Ø Air filter connection: 23 mm · Width: 47 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle block: 2.2 · Camouflaged: Yes · Area of application: Tuning · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
CHF 119.90
GPO 41 mm "Pomodoro" cylinder kit | Sachs 503
Nominal diameter: 41 mm · Manufacturer: GPO · Material: Gray cast iron · Displacement: 57 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 22 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 40 x 60 / 37 x 37 · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Area of application: Tuning
CHF 179.90
GPO 43 mm "Pomodoro" cylinder kit | Sachs 503 2AL, AAL, 2BL, ABL
Nominal diameter: 43 mm · Manufacturer: GPO · Material: Gray cast iron · Displacement: 63 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 22 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 40 x 60 / 37 x 37 · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Area of application: Tuning · Alternative version of the Pony OEM number: A1087 · Alternative version of the Sachs OEM number: 0213 142 000
CHF 224.90
swiing® ingenious 15 mm intake manifold short version | Sachs 503 2AL, 2BL
Manufacturer: swiing® ingenious parts · Material: Aluminum · Ø inside: 15 mm · Ø External connection: 20 mm · Number of fixing points: 2 pcs · Hole spacing inlet: 32 mm · Thread type: M6x1 (standard thread) · Total length: 50 mm · Area of application: Tuning · Alternative version of the Pony OEM number: A2177
CHF 49.90
Moped fans also bought
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch
CHF 9.90
CHF 22.00/l
GPO piston 40.94 mm | Sachs 502, 50/2, 50/3, 50/4
Nominal diameter: 41 mm · Manufacturer: GPO · Thick piston ring: 1.8 mm · Ø outside piston (A): 40.94 mm · Compression height (C): 28 mm · Curvature (D): 3.2 mm · Total piston height (E): 49.4 mm · Number of piston rings (F): 2 pcs · Piston ring impact: Internal fuse (IS) · Piston ring mold: Rectangular ring · Piston ring height: 1.5 mm · Ø piston pin (B): 12 mm · Piston weight: 86 g
CHF 39.90
Hot
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Sachs 503 AAL, 2AL/2BL, ABL, AB, AC, ADV
Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SRE · Nominal diameter: 17 mm · Ø Inside entrance: 17 mm · Total length: 64.8 mm · Ø Output inside: 17.1 mm · Height: 89 mm · Height: 110 mm · Ø Air filter connection: 27.5 mm · Width: 47 mm · Mounting type: Plug connection clamped · Ø Internal connection: 23 mm · Ø fuel hose connection: 5 mm · Mixed oil connection: No · Area of application: Tuning · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.2 · Nozzle size: 74 · Clamping screw torque (max.): 3 N/m
CHF 119.90
Hot
swiing® ingenious 17 mm SRF carburetor camouflaged | Sachs 503, Puch Velux
Nominal diameter: 17 mm · Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SRF · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 5 mm · Nozzle size: 74 · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Total length: 61.5 mm · Mounting type: Plug connection clamped · Ø Output inside: 17.1 mm · Height: 89 mm · Height: 112 mm · Ø Air filter connection: 23 mm · Width: 47 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle block: 2.2 · Camouflaged: Yes · Area of application: Tuning · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
CHF 119.90
GPO piston 43 mm | Sachs 50/2, 50/3, 50/4
Nominal diameter: 43 mm · Manufacturer: GPO · Thick piston ring: 1.8 mm · Ø outside piston (A): 42.94 mm · Compression height (C): 27.7 mm · Curvature (D): 2.4 mm · Total piston height (E): 50.2 mm · Number of piston rings (F): 2 pcs · Piston ring impact: Internal fuse (IS) · Piston ring mold: Rectangular ring · Piston ring height: 1.5 mm · Ø piston pin (B): 12 mm
CHF 44.90
GPO 41 mm "Pomodoro" cylinder kit | Sachs 503
Nominal diameter: 41 mm · Manufacturer: GPO · Material: Gray cast iron · Displacement: 57 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 22 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 40 x 60 / 37 x 37 · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Area of application: Tuning
CHF 179.90
GPO 43 mm "Pomodoro" cylinder kit | Sachs 503 2AL, AAL, 2BL, ABL
Nominal diameter: 43 mm · Manufacturer: GPO · Material: Gray cast iron · Displacement: 63 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 22 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 40 x 60 / 37 x 37 · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Area of application: Tuning · Alternative version of the Pony OEM number: A1087 · Alternative version of the Sachs OEM number: 0213 142 000
CHF 224.90
Collection only possible with online purchase and appointment.
