Useful tool for tightening the clutch spring on manual Puch X30 Sport & Puch X30 Velux mopeds / mopeds.
By pretensioning the spring, the nut can be easily mounted on the crankshaft.
The four threaded bolts with hexagon socket are screwed into the corresponding threaded holes. The clutch spring is pretensioned by tightening the four 3D nuts.
Thickness of mounting plate: 6 mm
Threaded bolts: M6 x 70 mm (with hexagon socket)
Nuts: M6 x 18 mm (SW10 mm)
Figures 4 and 5 are for illustrative purposes.
Exceptional product for the highest demands of the quality brand swiing®.
| Material | Steel |
| Total length | 130 mm |
| Width | 96 mm |
| Thickness | 6 mm |
| Manufacturer | swiing® ingenious parts |
| Surface | galvanized (blue) |
| Number of components | 9 pcs |
| Thread type | M6x1 (standard thread) |
| Area of application | Special tool |
| Puch | Z50 (X30 Sport) Z50 (X30 Velux) |
Moped fans also bought
swiing® revival gasket set Z50 engine | Puch X30 NS / NL
Material: Sealing paper · Manufacturer: swiing® revival parts · Number of components: 10 pcs · Area of application: Standard · Ø outlet inside: 22 mm · Hole spacing outlet: 42 mm · Hole spacing inlet: 32 - 38 mm · Hole pattern [mm]: 44 x 44
CHF 19.90
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch
CHF 9.90
CHF 22.00/l
swiing® revival shim set crankshaft L17 | Puch Z50
Material: Steel · Surface: blank / oiled · Nominal diameter inside: 17 mm · Thickness: 0.1 mm · Thickness: 0.15 mm · Thickness: 0.2 mm · Thickness: 0.25 mm · Thickness: 0.3 mm · Manufacturer: swiing® revival parts · Ø outside: 23.8 mm · Ø inside: 17.1 mm
CHF 8.90
swiing® ingenious clutch spring reinforced +20% | Puch Z50
Spring design: Pressure spring · Ø wire: 4.6 mm · Manufacturer: swiing® ingenious parts · Total length: 20.5 mm · Material: Spring steel · Surface: coated · Color: blue · Number of components: 1 pcs · Ø inside: 30 mm · Ø outside: 39 mm · Area of application: Tuning
CHF 23.90
swiing® ingenious clutch spring reinforced +40% | Puch Z50
Spring design: Pressure spring · Ø wire: 4.5 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Ø inside: 30 mm · Number of components: 1 pcs · Ø outside: 39 mm · Total length: 23.5 mm · Color: red · Area of application: Tuning
CHF 23.90
Collection only possible with online purchase and appointment.
