39 mm cylinder head without decompression hole, compatible with the 39 mm swiing® Original and Tuning cylinder kit for the Zündapp Belmondo moped / mopeds with chassis number 71 and engine type 247, as well as Zündapp M25 and M50 Bergsteiger mopeds with chassis number 434 and engine type 247.
In addition to these models, the racing kit also fits ALPA Spezial 3000 or ALPA Black River small motorcycles equipped with a Zündapp Type 247 engine.
The shoulder on the gasket side ensures that the cylinder head sits perfectly centered on the cylinder.
Note: If you want to install this cylinder head on an original Zündapp cylinder, you must raise it by 1.5 mm to prevent the piston from rubbing against the head.
Also note that, due to the design, you will need longer stud bolts.
You can find the stud bolts mentioned above, as well as the complete cylinder kit, in the accessories section.
A sophisticated product from the premium swiing® brand, designed to meet the highest standards.
Alternative to the original Zündapp part numbers: 247-02.112, 247-02.106
| Manufacturer | swiing® ingenious parts |
| Ø cylinder | 39 mm |
| Number of fixing points | 4 pcs |
| Decompressor | No |
| Alternative version of the Zündapp OEM number | 247-02.112, 247-02.106 |
| Zündapp | Belmondo (Type 247-71) Moped 25 (M 25) / Moped M 50 Bergsteiger (Type 247-434) |
Accessories & related products
Loctite 638 Joining shaft-hub high-strength 10 ml
Temperature resistance (min.): -75 - 150 °C · Color: green · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Hazard warning: Causes serious eye damage · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Danger · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Adhesion: high-strength · Gap dimension (max.): 0.25 mm · Type of application: 1K · Alignment time: 300 sec · Breakaway torque (according to material): 23 N/m · Breakaway torque (according to material): 25 N/m · Breakaway torque (according to material): 57 N/m · Area of application: Chemistry
CHF 21.90
CHF 2’190.00/l
swiing® ingenious piston 39 mm Vertex | Zündapp Belmondo, Bergsteiger
Manufacturer: swiing® ingenious parts · Ø outside piston (A): 38.95 mm · Compression height (C): 26.3 mm · Curvature (D): 1.5 mm · Total piston height (E): 51.5 mm · Number of piston rings (F): 1 pcs · Nominal diameter: 39 mm · Piston ring mold: Rectangular ring · Piston ring impact: Oblique push · Piston ring height: 1.5 mm · Ø piston pin (B): 12 mm · Weight piston kit: 82 g
CHF 59.90
Explore categories from Cylinder
Moped fans also bought
17 mm Bing SRF carburetor (replica)
Total length: 78 mm · Width: 64 mm · Height: 117 mm · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRF · Nominal diameter: 17 mm · Ø Internal connection: 23 mm · Ø Air filter connection: 60 mm · Ø Air filter connection: 64 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M4x0.7 (standard thread) · Nozzle block: 2.xx · Mounting type: Plug connection clamped · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m · Area of application: Tuning
CHF 64.90
swiing® ingenious 16 mm intake manifold Bing SRF | Zündapp Belmondo (Type 247)
Manufacturer: swiing® ingenious parts · Ø inside: 16 mm · Material: Aluminum · Camouflaged: No · Ø External connection: 23 mm · Total length: 35 mm · Total height: 42 mm · Number of fixing points: 2 pcs · Height flange center hole: 35 mm · Mounting type: Screws · Hole spacing inlet: 40 mm · Area of application: Tuning
CHF 39.90
swiing® ingenious exhaust manifold 28 mm left chrome | Zündapp Belmondo
Color: Chrome · Manufacturer: swiing® ingenious parts · Ø inside: 25 mm · Ø outside: 28 mm · Total length: 360 mm · Material: Steel · Surface: chrome-plated · Hole spacing outlet: 40 mm · Number of fixing points: 2 pcs · Mounting type: Stud bolts & nuts
CHF 49.90
Not in stock
swiing® ingenious 39 mm cylinder kit tuning with head | Zündapp Bergsteiger
Nominal diameter: 39 mm · Manufacturer: Vertex · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 42 mm · Thread inlet: M6x1 (standard thread) · Ø piston pin (B): 12 mm · Outlet type: slanted · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Decompressor: No · Camouflaged: No · Area of application: Tuning · Alternative version of the Zündapp OEM number: 247-02.709 · Alternative version of the Zündapp OEM number: 247-02.708 · Alternative version of the Zündapp OEM number: 247-02.112 · Alternative version of the Zündapp OEM number: 247-02.106
CHF 224.90
Not in stock
Working late? Evening hours on Thursday until 20:00
