39 mm cylinder head with an M12x1.5 mm decompression hole, compatible with the 39 mm swiing® Original and Tuning cylinder kit for the Zündapp Belmondo moped / mopeds with chassis number 71 and engine type 247, as well as the Zündapp M25 and M50 Bergsteiger mopeds with chassis number 434 and engine type 247.
In addition to these models, the racing kit also fits ALPA Spezial 3000 or ALPA Black River small motorcycles equipped with a Zündapp Type 247 engine.
The shoulder on the gasket side ensures that the cylinder head sits perfectly centered on the cylinder.
Note: If you want to install this cylinder head on an original Zündapp cylinder, you must raise it by 1.5 mm to prevent the piston from rubbing against the head.
Also note that, due to the design, you will need longer stud bolts.
You can find the stud bolts mentioned above, as well as the complete cylinder kit, in the accessories section.
A sophisticated product from the premium swiing® brand, designed to meet the highest standards.
Alternative to the original Zündapp part numbers: 247-02.112, 247-02.106
| Manufacturer | swiing® ingenious parts |
| Ø cylinder | 39 mm |
| Number of fixing points | 4 pcs |
| Decompressor | MF12x1.5 |
| Alternative version of the Zündapp OEM number | 247-02.112, 247-02.106 |
| Zündapp | 434 Chassis (mountaineer) Belmondo (Type 247-71) |
Accessories & related products
Loctite 638 Joining shaft-hub high-strength 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Color: green · Contents: 10 ml · Hazard warning: Causes serious eye damage · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Danger · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Adhesion: high-strength · Type of application: 1K · Gap dimension (max.): 0.25 mm · Alignment time: 300 sec · Temperature resistance (min.): -75 - 150 °C · Breakaway torque (according to material): 23 N/m · Breakaway torque (according to material): 25 N/m · Breakaway torque (according to material): 57 N/m
CHF 21.90
CHF 2’190.00/l
swiing® ingenious piston 39 mm Vertex | Zündapp Belmondo, Bergsteiger
Manufacturer: swiing® ingenious parts · Nominal diameter: 39 mm · Ø outside piston (A): 38.95 mm · Ø piston pin (B): 12 mm · Compression height (C): 26.3 mm · Curvature (D): 1.5 mm · Total piston height (E): 51.5 mm · Number of piston rings (F): 1 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Oblique push · Piston ring height: 1.5 mm · Weight piston kit: 82 g
CHF 59.90
Explore categories from Cylinder
Moped fans also bought
17 mm Bing SRF carburetor (replica)
Width: 64 mm · Height: 117 mm · Material: Aluminum · Area of application: Tuning · Component group Carburetor: Carburetor complete · Nominal diameter: 17 mm · Carburetor type: SRF · Nozzle thread: M4x0.7 (standard thread) · Ø fuel hose connection: 6 mm · Total length: 78 mm · Ø Internal connection: 23 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 60 mm · Ø Air filter connection: 64 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle block: 2.xx · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
CHF 64.90
swiing® ingenious 39 mm cylinder kit tuning with head | Zündapp Bergsteiger
Nominal diameter: 39 mm · Manufacturer: Vertex · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 42 mm · Thread inlet: M6x1 (standard thread) · Ø piston pin (B): 12 mm · Outlet type: slanted · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Decompressor: No · Camouflaged: No · Area of application: Tuning · Alternative version of the Zündapp OEM number: 247-02.709 · Alternative version of the Zündapp OEM number: 247-02.708 · Alternative version of the Zündapp OEM number: 247-02.112 · Alternative version of the Zündapp OEM number: 247-02.106
CHF 224.90
swiing® ingenious 39 mm cylinder kit with "Original" head | Zündapp Belmondo
Nominal diameter: 39 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 48 mm · Ø Inlet inside: 9.2 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 40 mm · Ø piston pin (B): 18.5 mm · Outlet type: slanted · Hole spacing outlet: 40 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 42 · Camouflaged: No · Zündapp OEM number: 247-02.709 · Zündapp OEM number: 247-02.112
CHF 224.90
Working late? Evening hours on Thursday until 20:00
