Adhesive with the writing "Göricke" which is originally attached to the gas tank of your moped / moped.
Tank sticker dimensions: 110 x 20 mm
For easier installation, the stickers are mounted on a transparent carrier film. The high-quality stickers are petrol- and UV-resistant.
The area to be covered should be free of grease and dirt in order to provide a firm hold for the adhesive. You can find suitable cleaning cloths in the accessories section.
Details
Material | Polyvinyl chloride (PVC) |
Width | 110 mm |
Rear side texture | Adhesive |
Place of use | Frame (+ tank) |
Consistency | UV-resistant, petrol resistant |
Height | 20 mm |
Suitable for the following models
Sachs |
Accessories & related products
Loctite 7200 Adhesive and sealant remover 400 ml
Manufacturer: Loctite · Area of application: Chemistry · Area of application: Cleaner · Contents [ml]: 400 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous
CHF 32.40
CHF 81.00/l
Moped fans like you also bought:
Karcoma fuel tap M12x1 vertical (with union nut) 2 connections
Manufacturer: Karcoma · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: vertical / vertical · Outlet direction: any · Spare tube shape: straight · Mounting type: Union nut · Thread type: MF12x1 (fine pitch thread) · Reserve level: 50 mm
CHF 22.90
Karcoma fuel tap M12x1 vertical | Sachs / Pony / Cilo
Manufacturer: Karcoma · Possible lever positions: open / closed / reserve · Material lever: Aluminum · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: vertical / vertical · Outlet direction: any · Spare tube shape: straight · Mounting type: Union nut · Thread type: MF12x1 (fine pitch thread) · Reserve level: 50 mm
CHF 22.90
swiing® ingenious needle roller bearing 12/15/14.2 original silver cage
Bearing type: Needle roller and cage assembly · Bearing cage: Silver cage · Dimension needle bearing: 12/15 x 14.2 · Ø inside: 12 mm · Ø outside: 15 mm · Manufacturer: swiing® ingenious parts · Width: 14.2 mm · Alternative version of the Pony OEM number: A4222 · Alternative version of the Sachs OEM number: 0232 157 001 · Tomos OEM number: 035548
CHF 11.90
swiing crankshaft Racing (Version 2.0) | Sachs 50/2, 50/3
Manufacturer: swiing · Cheek type: standard · Crankshaft stroke: 42 mm · Connecting rod length center-center: 85 mm · Total length of crankpin on clutch side: 40.7 mm · Total length crankpin ignition side: 63.4 mm · Ø crank webs: 85 mm · Ø piston pin (B): 12 mm · Ø Connecting rod eye: 15 mm · Ø Bearing seat (clutch side): 15 mm · Ø Bearing seat (ignition side): 15 mm · Thread type: MF10x1 (fine pitch thread) · Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Wide crank webs: 30 mm · Weight: 878 g · Area of application: Racing
CHF 142.90