
Stator for the electronic ignition on your Piaggio Ciao, Si, Bravo and Boxer mopeds
The quality of the armature plate won't knock anyone off their saddle, but it has been tested by us and works as it should.
Technical data:
Advantages of the CDI ignition:
Note: This ignition only fits on housings that are designed for electronic ignition. In addition to some original Piaggio housings, this also includes the Polini Speed Engine and the Malossi racing housing.
You need 12V bulbs for ELO ignitions and must also install a voltage regulator to prevent the bulbs from burning out.
You can find a voltage regulator, the matching flywheel and other parts for your electric ignition in the accessories section.
Original Piaggio spare part number: 219965
Good-quality reproduction product from the Asian market.
| Manufacturer | Quenching |
| Tension | 12 V |
| Number of cables | 6 pcs |
| Performance | 90 W |
| Ø inside | 29.5 mm |
| Ø outside | 105 mm |
| Cable length | 100 mm |
| Hole spacing | 34.5 mm |
| Number of fixing points | 3 pcs |
| Piaggio | Ciao - P , SC , PX , C24 Si Bravo / Super Bravo Boxer Grillo |
Accessories & related products
BERU spark plug connector / 1 kΩ interference suppressed
Ø cable: 5 mm · Ø cable: 7 mm · Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Subcategory: Spark plug connector · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
CHF 8.80
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Area of application: Chemistry · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
CHF 21.90
CHF 2’190.00/l
GPO stator electronic ignition with light (three outputs) | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Tension: 12 V · Performance: 90 W · Cable length: 100 mm · Cable length: 400 mm · Ø inside: 29.5 mm · Ø outside: 105 mm · Number of cables: 6 pcs · Number of fixing points: 3 pcs · Hole spacing: 34.5 mm · Piaggio OEM number: 219965
CHF 119.90
GPO flywheel 800 g full cheek shaft electronic ignition | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Weight: 800 g · Material: Aluminum · Ø Internal flywheel: 106 mm · Direction of rotation: right · Ø Flywheel outside: 139.5 mm · Thread type: MF17x1 (fine pitch thread) · Alternative version of the Piaggio OEM number: 181103 · Alternative version of the Piaggio OEM number: 2238183
CHF 132.90
GPO flywheel 1300 g full cheek shaft electronic ignition | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Weight: 1300 g · Material: Aluminum · Ø Internal flywheel: 106 mm · Direction of rotation: right · Ø Flywheel outside: 139.5 mm · Thread type: MF17x1 (fine pitch thread) · Alternative version of the Piaggio OEM number: 181103 · Alternative version of the Piaggio OEM number: 2238183
CHF 132.90
Moped fans also bought
swiing® ingenious puller flywheel | Piaggio Ciao, SI, Bravo, Boxer
Width across flats trigger: 10 mm · Width across flats trigger: 17 mm · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: blackened · Surface: galvanized (blue) · Diameter: 12 mm · Diameter: 24 mm · Number of components: 3 pcs · Thread type: MF12x1.5 (fine pitch thread) · Thread type: MF17x1 (fine pitch thread) · Total length: 100 mm · Width across flats Screw: 19 mm · Area of application: (Dis)assembly tool
CHF 17.90
GPO ignition coil CDI | Piaggio Ciao, SI, Bravo, Boxer
Place of use: External (outside the ignition) · Manufacturer: GPO · Color: black · Ø cable holder: 7.9 mm · Cable length: 192 mm · Height: 35.5 mm · Mounting type: Screws · Ø mounting hole: 5.7 mm · Number of fixing points: 2 pcs · Hole spacing: 33 mm · Total length: 95 mm · Area of application: Original · Area of application: Performance · Area of application: Standard
CHF 39.90
Polini Speed Engine engine housing electronic ignition | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Polini · Material: Aluminum · Surface: sandblasted · Color: silver · Stock number: 6202 · Crankshaft stroke: 43 mm · Width: 175 mm · Height: 104 mm · Ignition type: Electronic · Total length: 215 mm
CHF 209.90
GPO pedal axle 23 teeth with keyway | Piaggio SI
Chain pitch: 1/2" x 3/16" · Manufacturer: GPO · Material: Steel · Color: Chrome · Surface: chrome-plated · Number of teeth: 23 pcs · Wavelength from wreath: 60 mm · Wavelength from wreath: 194 mm · Ø Outer sprocket: 100 mm · Ø Pedal arm holder: 16 mm · Ø Bearing support: 15.9 mm · Total length: 257 mm · Crank (wreath): 2 mm
CHF 49.90
NGK B7ES spark plug long thread
Manufacturer: NGK · Candle designation: B7ES · Candle thread type: long · Spark plug socket: M4 · Thread type: MF14x1.25 (fine pitch thread) · Spark plug socket: SAE · Suppressed: No · Width across flats: 21 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning
CHF 6.50










