Valvanized sprocket with 56 teeth suitable for your mopeds & mopeds, with 5 - or 6-hole mounting on the wheel hub such as Peugeot.
Ø inner (C): 98 mm
Ø mounting hole: 6.4 mm
Ø bolt circle: 115 mm
Crushing (A): 12 mm
Thickness (B): 4.5 mm
Ø outside (D): 231 mm
Chain standard: 415 (standard – moped chains)
Material: Steel, galvanized
You can find matching drive chains for this sprocket in the accessories section.
A quality product made in France.
Details
Chain type | 415H |
Chain pitch | Other |
Manufacturer | Made in France |
Material | Steel |
Color | silver |
Surface | galvanized (blue) |
Number of teeth | 56 pcs |
Ø inside | 98 mm |
Ø bolt circle | 115 mm |
Thickness | 4.5 mm |
Ø mounting hole | 6.4 mm |
Number of fixing points | 10 pcs |
Cranking (offset) | 12 mm |
Suitable for the following models
Peugeot |
Accessories & related products
Wippermann drive chain No.18 (double reinforced)
Material: Steel · Manufacturer: Wippermann · Surface: blank / oiled · Chain pitch: 1/2" x 3/16" · Chain type: 415H · Rolling circumference: 1448 mm · Number of chain links: 114 pcs · Chain lock type: Spring lock · Ø bore: 4.2 mm · Ø Pin: 4.15 mm · Color: gray
CHF 33.90
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Rolling circumference: 1448 mm · Number of chain links: 114 pcs · Chain lock type: Spring lock · Ø bore: 4.05 mm · Ø Pin: 4 mm · Color: gray
CHF 18.90
swiing® revival screw set sprocket mounting Inox | Puch Maxi
Manufacturer: swiing® revival parts · Number of components: 24 pcs · Material: Chrome steel (known as Nirosta®) · Color: gray · Thread type: M6x1 (standard thread) · Drive: External hexagon · Screw head: Hexagon · Shank: No · Thread length: 22 mm · Width across flats SW: 10 mm
CHF 12.90
Sprocket 42 teeth 5 / 6 - hole galvanized | Peugeot
Manufacturer: Made in France · Material: Steel · Surface: galvanized (blue) · Chain type: 415H · Number of teeth: 42 pcs · Ø bolt circle: 115 mm · Ø inside: 98 mm · Ø mounting hole: 6.4 mm · Thickness: 4.5 mm · Cranking (offset): 6 mm · Number of fixing points: 10 pcs · Color: silver
CHF 22.90
Moped fans like you also bought:
Dell'Orto 57° / 70° carburetor elbow set M6x0.75
Manufacturer: Dell'Orto · Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Surface: nickel-plated · Angle: 57 ° · Angle: 70 ° · Ø outside: 6 mm · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: MF5x0.75 (fine pitch thread) · Total length: 31 mm · Total length: 38 mm · Total length: 39 mm · Total length: 46 mm · Height: 33.5 mm · Height: 37 mm · Height: 37.5 mm · Height: 40 mm · Width across flats nut: 7 mm
CHF 13.90
Eurol copper grease 100 g
Manufacturer: Eurol · Area of application: Chemistry · Area of application: Fat · Contents [g]: 100 g · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Hazard warning: Very toxic to aquatic organisms · Signal word: Danger · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Temperature resistance (min.): -40 - 1100 °C
CHF 11.90
CHF 119.00/kg
Motorex chain spray Racing (PTFE) 500 ml
Manufacturer: Motorex · Oil type: fully synthetic · Area of application: Chemistry · Area of application: Racing · Contents [ml]: 500 ml · Hazard warning: Causes skin irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous
CHF 23.90
CHF 47.80/l
Handlebar stem 30 cm | Piaggio SI Europe
Manufacturer: Made in Italy · Material: Steel · Surface: chrome-plated · Color: Chrome · Mounting type: Front boom mounting · Ø outside: 22.1 mm · Ø Stem: 22 mm · Stem height: 120 mm · Height: 300 mm · Length handlebar ends: 160 mm · Width: 620 mm · Crossbar: No
CHF 64.90