&p>Transition piece for the Siggnature saddle base and the «Tuck & Roll» genuine leather saddle.
The custom shell «genuine leather» on the accessories in conjunction with the substructure can be easily fitted to your moped, moped and small motorcycle.
The use of these two adapter pieces is necessary because the rear threaded sockets on the saddle are not parallel to the lower surface and the nut would therefore be tightened at an angle.
Ø bore: 8.3 mm (for M8)
Ø outer: 25 mm
Total height: 24 mm
Corresponding attachments such as saddle shell, saddle clamps, substructure etc. can be found in the accessories section.
A kick-ass custom product straight from the Siggnature workshop
.| Manufacturer | Siggnature |
| Color | black |
| Ø outside | 25 mm |
| Thread size | M8 |
| Height | 24 mm |
| Ø bore | 8 mm |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Area of application: Chemistry · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
CHF 21.90
CHF 2’190.00/l
Cap nut M4 - M10 Inox
Thread type: M10x1.5 (standard thread) · Thread type: M4x0.7 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M7x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Nut type: Cap nut · Material: Chrome steel (colloquially known as stainless steel) · Nominal diameter (thread): 4 mm · Nominal diameter (thread): 5 mm · Nominal diameter (thread): 6 mm · Nominal diameter (thread): 7 mm · Nominal diameter (thread): 8 mm · Nominal diameter (thread): 10 mm · Drive: External hexagon
CHF 0.80
66HEROES Pointed Nut "Bullet" M5–M12 Polished Stainless Steel
Manufacturer: 66HEROES · Thread type: M10x1.5 (standard thread) · Thread type: M12x1.75 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Material: Chrome steel (colloquially known as stainless steel) · Nut type: Pointed nut · Nominal diameter (thread): 5 mm · Nominal diameter (thread): 6 mm · Nominal diameter (thread): 8 mm · Nominal diameter (thread): 10 mm · Nominal diameter (thread): 12 mm · Drive: External hexagon
CHF 6.90
66HEROES pointed nut "Spike" M5 - M12 Inox
Manufacturer: 66HEROES · Thread type: M10x1.5 (standard thread) · Thread type: M12x1.75 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Material: Chrome steel (colloquially known as stainless steel) · Nut type: Pointed nut · Nominal diameter (thread): 5 mm · Nominal diameter (thread): 6 mm · Nominal diameter (thread): 8 mm · Nominal diameter (thread): 10 mm · Nominal diameter (thread): 12 mm · Drive: External hexagon
CHF 6.90
Explore categories from Saddle
Moped fans also bought
- 11 %
Hot 
swiing® revival bottom bracket bushing nylon | Puch Maxi, X30 Sport, Velux, NG-2AH
Bearing type: Plain bearing · Manufacturer: swiing® revival parts · Material: Nylon · Color: black · Ø Bundle: 24.1 mm · Ø inside: 16.2 mm · Ø outside: 20.2 mm · Total length: 19 mm · Puch OEM number: 349.1.42.005.1
CHF 2.50
CHF 2.20
swiing® revival stud bolt M6x106 (10.9 strength class)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nominal diameter (thread): 6 mm · Thread type: M6x1 (standard thread) · Total length: 106 mm · Thread length: 12 mm · Thread length: 20 mm · Puch OEM number: 360.1.10.034.1
CHF 1.80
Working late? Evening hours on Thursday until 20:00
