- 16 %
Not so nice 
Copy of the KTM SX50 clutch suitable for all Puch Maxi mopeds / mopeds with E50 engine.
Attention: The clutch hub does not fit Puch Maxi crankshafts as the cone is not correct.
The cone can either be reworked or alternatively the high-quality matching MBR clutch star, which is listed under accessories, can be used.
Tightening torque on crankshaft: 35 - 40 Nm
Tightening torque screws for jaws: 10 Nm
The fastening nut is not included in the scope of delivery.
Mäsig-läsig! – We strive to offer you the widest range of moped spare parts. However, this product is of rather poor quality and is not recommended by us. Should you nevertheless choose this item, we understand, but cannot offer you any guarantee or exchange.
The clutch is a cheap replica, the clutch linings therefore last less than the original KTM linings. During tests in our racing team, the clutch usually lasted between 1 and 2 hours, after which the linings had to be replaced. The star, the springs and also the fastening screws are advantageously used from the original KTM clutch.
High-quality alternatives can be found in the accessories section.
| Area of application | Tuning |
| Recording type | Cone mounting |
| Number of jaws | 3 pcs |
| Puch | E50 |
Ratings
Accessories & related products
MBR Clutch KTM SX50 | Puch E50
Manufacturer: MBR · Material: Steel · Material addition: Aluminum · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning
CHF 339.90
Explore categories from Clutch
Moped fans also bought
Hot 
KMC drive chain 415H (reinforced) 128L
Chain type: 415H · Chain pitch: 1/2" x 3/16" · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 128 pcs · Chain lock type: Spring lock · Rolling circumference: 1626 mm · Ø bore: 4 mm · Ø Pin: 3.94 mm
CHF 12.50
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Number of components: 7 pcs · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Hole spacing outlet: 42 mm · Area of application: Standard
CHF 9.90
BOSCH screw-in condenser | Bosch / Ducati
Manufacturer: BOSCH · Capacity: 0.2 µF · Mounting type: Plug connection clamped · Connection type: Thread for screwing · Ø outside: 18 mm · Thread type: M3x0.5 (standard thread) · Height: 27 mm · Total height: 33.5 mm · Area of application: Original · Area of application: Standard · Alternative version of the Pony OEM number: A2090 · Pony OEM number: A2092 · BOSCH OEM number: 2 207 330 050 · Alternative version of the Sachs OEM number: 0265 052 003 · Sachs OEM no.: 0265 052 007
CHF 19.90
Hot
BOSCH breaker with cable | Bosch / Ducati
Manufacturer: BOSCH · Material: Steel · Ø Internal flywheel: 90 mm · Cable available: Yes · Ø axle: 4 mm · Cable length: 100 mm · Number of fixing points: 1 pcs · Ø mounting hole: 4.5 mm · Area of application: Original · Area of application: Standard · Alternative version of the Pony OEM number: A4606 · Alternative version of the Pony OEM number: A4606A · Pony OEM number: A4607 · BOSCH OEM number: 1 217 013 025 · Sachs OEM no.: 0283 116 102 · Alternative version of the Sachs OEM number: 0983 106 000 · Alternative version of the Sachs OEM number: 2783 039 001 · BERU OEM number: 0 340 100 710
CHF 19.90
Hot
DUCATI ignition coil (1A quality)
Manufacturer: DUCATI · Ø cable holder: 5.9 mm · Color: black · Ø Internal flywheel: 90 mm · Height: 17 mm · Total length: 76.5 mm · Cable length: 37 mm · Place of use: Internal (in the ignition) · Mounting type: Screws · Number of fixing points: 2 pcs · Hole spacing: 54 mm · Ø mounting hole: 4.6 mm · Area of application: Original · Area of application: Standard · Pony OEM number: A2114 · Alternative version of the Pony OEM number: A2116 · Alternative version of the Pony OEM number: A2118 · Pony OEM number: A5524 · Sachs OEM no.: 0265 132 100 · Sachs OEM no.: 0265 203 001 · Alternative version of the Sachs OEM number: 0265 142 002 · Alternative version of the Sachs OEM number: 0265 142 004
CHF 64.90
swiing® ingenious crankshaft "High End" | Tomos Classic, Quadro, Sprint, Fun Sport'R
Manufacturer: swiing® ingenious parts · Cheek type: Full cheeks · Connecting rod length center-center: 90 mm · Total length of crankpin on clutch side: 93 mm · Total length crankpin ignition side: 64 mm · Ø crank webs: 70 mm · Ø piston pin (B): 12 mm · Thread type: MF10x1 (fine pitch thread) · Area of application: Racing · Wide crank webs: 34 mm · Tomos OEM number: 223421
CHF 134.90
Not in stock
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
