Repair kit for the spring holders of the 1st generation side fairings of your Piaggio Ciao C9 and P moped / moped.
The repair kit consists of two long and one short component, corresponding to the original side protection screws used. The set is manufactured using additively manufactured plastic and glued to the defective side guards using two-component adhesive (not included).
| Manufacturer | Made in Switzerland |
| Material | Plastic |
| Color | gray |
| Piaggio | Ciao - P |
Ratings
Accessories & related products
PETEC plastic repair adhesive PlastBond 24 ml
Temperature resistance (min.): -40 - 140 °C · Manufacturer: PETEC · Material to be used: Metal · Material to be used: Plastic · Contents: 24 ml · Color: black · Contents: 30 g · Hazard warning: Can probably cause cancer · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful if inhaled · Hazard warning: May cause allergic skin reactions · Hazard warning: May cause damage to organs through prolonged or repeated exposure · Hazard warning: May irritate the respiratory tract · Signal word: Danger · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS08 - Harmful to health · Type of application: 2K · Alignment time: 60 sec · Area of application: Chemistry
CHF 32.50
CHF 1’354.17/l
ColorMatic 1K Filling Primer 400 ml
Temperature resistance (min.): 0 - 250 °C · Manufacturer: ColorMatic · Lacquer type: Polyvinyl butyral · Contents: 400 ml · Color: gray · Hazard warning: Causes skin irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: May cause allergic skin reactions · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Paint & varnish
CHF 23.90
CHF 59.75/l
PETEC Power BiBond 2K repair adhesive 24 ml
Temperature resistance (min.): -40 - 120 °C · Manufacturer: PETEC · Material to be used: Metal · Material to be used: Plastic · Material to be used: Rubber · Material to be used: Wood · Contents: 24 ml · Color: white · Color: yellow · Hazard warning: Causes serious eye damage · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: Highly flammable liquid and vapor · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Type of application: 2K · Alignment time: 180 sec · Area of application: Chemistry · Area of application: Workshop accessories
CHF 25.50
CHF 1’062.50/l
DUPLI-COLOR Silicone Remover 150 ml
Manufacturer: DUPLI-COLOR · Contents: 150 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Cleaner
CHF 12.90
CHF 86.00/l
Presto plastic filler 250 g
Temperature resistance (min.): 0 - 120 °C · Manufacturer: Presto · Lacquer type: Polyester resin · Color: black · Contents: 250 g · Hazard warning: Causes serious eye damage · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Flammable liquid and vapor · Hazard warning: Harmful if inhaled · Hazard warning: Harmful if swallowed · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: May cause allergic skin reactions · Hazard warning: Very toxic to aquatic organisms · Hazard warning: Very toxic to aquatic organisms (with long lasting effects) · Signal word: Attention · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Paint & varnish · Area of application: Workshop accessories
CHF 16.90
CHF 67.60/kg
Explore categories from Formwork & frame parts
Moped fans also bought
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Mounting type: Union nut · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Thread type: MF12x1 (fine pitch thread) · Reserve level: 70 mm
CHF 9.90
BOSCH breaker with cable | Bosch / Ducati
Ø mounting hole: 4.5 mm · Manufacturer: BOSCH · Material: Steel · Ø Internal flywheel: 90 mm · Cable length: 100 mm · Cable available: Yes · Ø axle: 4 mm · Number of fixing points: 1 pcs · Area of application: Original · Area of application: Standard · Alternative version of the Pony OEM number: A4606 · Alternative version of the Pony OEM number: A4606A · Pony OEM number: A4607 · Alternative version of the Sachs OEM number: 0983 106 000 · Alternative version of the Sachs OEM number: 2783 039 001 · Sachs OEM no.: 0283 116 102 · BOSCH OEM number: 1 217 013 025 · BERU OEM number: 0 340 100 710
CHF 19.90
EFFE Condenser with cable | Piaggio Ciao, SI, Bravo, Boxer
Ø mounting hole: 4.4 mm · Manufacturer: EFFE · Capacity: 0.26 µF · Mounting type: Tab for screwing · Connection type: Cable for screwing · Ø outside: 18 mm · Total height: 31 mm · Height: 26 mm · Area of application: Original · Area of application: Standard · Piaggio OEM number: 102939
CHF 11.90
DR 43 mm cylinder kit 12 mm KoBo | Piaggio Ciao, SI, Bravo, Boxer
Nominal diameter: 43 mm · Manufacturer: DR Racing Parts · Material: Gray cast iron · Surface: varnished · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 46 mm · Ø Outlet outside: 22.3 mm · Ø outlet inside: 18 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 3 pcs · Hole pattern [mm]: 55 x 34 · Decompressor: Yes · Camouflaged: No · Area of application: Tuning
CHF 142.90
Collection only possible with online purchase and appointment.
