Rear wheel hub for Puch spoked wheels.
Fits Puch Maxi and X30 Sport NG-2A spoked wheels.
With pressed-in ball bearings.
Reproduction product, which is not comparable in quality to the original Puch rims.
Attention: The sprocket should always be glued to the hub with Loctite, as the threaded mounts are sometimes a little tight in diameter.
In addition, only Esjot freewheels should be used.
Good quality reproduction product from the Asian market.
| Manufacturer | Quenching |
| Color | gray |
| Puch |
Ratings
Accessories & related products
swiing® revival wheel axle LELEU & Grimeca wheel hub cast wheel rear | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø shaft: 11.9 mm · Shank length: 100 mm · Total length: 185 mm · Ø outside: 11.8 mm · Thread length: 26 mm · Thread length: 52.5 mm · Thread type: MF12x1 (fine pitch thread) · Width across flats: 19 mm
CHF 14.90
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: blue · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Area of application: Chemistry · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
CHF 21.90
CHF 2’190.00/l
ESJOT freewheel 16 - 23 teeth (1A quality)
Chain pitch: 1/2" x 1/8" · Manufacturer: ESJOT · Material: Steel · Surface: Hardened · Color: silver · Number of teeth: 16 pcs · Number of teeth: 18 pcs · Number of teeth: 20 pcs · Number of teeth: 23 pcs · Thickness: 15 mm · Thread type: FG34.8 (1.37" 24G)
CHF 14.90
Moped fans also bought
Inox
Hot 
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Thread type: M5x0.8 (standard thread) · Number of fixing points: 2 pcs · Mounting type: Nuts & bolts · Height: 5.3 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Total length: 145 mm · Width: 105 mm · Thread length: 8 mm · Color: silver · Ø mounting hole: 5 mm
CHF 10.90
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Surface: powder-coated · Color: black · Number of teeth: 45 pcs · Cranking (offset): 8 mm · Number of fixing points: 6 pcs · Hole spacing 2: 68 mm · Ø inside: 94 mm · Thickness: 4.5 mm · Ø mounting hole: 6.7 mm · Hole spacing: 36.5 mm · Ø bolt circle: 105.5 mm
CHF 19.90
Spotlight round Ø 13 cm chrome / black
Material: Sheet metal (steel) · Bulb holder: BA15d · Housing material: Metal · Switch included: No · Lens material: Plastic · Thread size: M6 · Surface: chrome-plated · Surface: varnished · Color: Chrome · Color: black · Color: transparent · Width: 134 mm · Height: 147 mm · Number of fixing points: 2 pcs · Test mark: none · Speedometer recording: None · Battery operated: No · Depth: 80 mm · Ø outside: 130 mm · Mounting type: Screws · Area of application: Standard
CHF 24.90
Rim ring 1.20 x 17" (47 mm) chrome
Ø Nipple hole: 5.5 mm · Material: Steel · Surface: chrome-plated · Color: Chrome · Rim well depth: 6 mm · Wheel size: 17 " · Nominal diameter: 433 mm · Overall width outside: 47 mm · Jaw width [inch]: 1.2 " · Jaw width [mm]: 31 mm · Number of spoke holes: 36 pcs
CHF 39.90
Collection only possible with online purchase and appointment.
