Rear light for universal use on your moped, moped and small motorcycle.
From the factory, the rear light was installed on the Gilera (Piaggio) Citta and the Suzuki PV50, among others.
The rear light is neatly finished and has an E3 mark and is therefore approved for road traffic.
Lamp holder: Soffit bulb (not included)
You can find the matching bulb and other rear lights in the accessories section.
A quality product made in Italy.
| Manufacturer | Made in Italy |
| Material | Plastic |
| Depth | 55 mm |
| Color | red, black |
| Width | 70 mm |
| Height | 80 mm |
| Bulb holder | Soffit pear |
| Brake light | No |
| Battery operated | No |
| Test mark | E3 |
| Reflectors | Yes |
| Mounting type | Nuts & bolts |
| Number of fixing points | 1 pcs |
| Universal | |
| Piaggio | Gilera Citta |
| Suzuki |
Accessories & related products
Rectangular rear light (ULO replica) Budget
Material: Plastic · Test mark: none · Depth: 55 mm · Color: black · Color: red · Width: 65 mm · Bulb holder: BA9s · Ø Receptacle: 3.5 mm · Brake light: No · Battery operated: No · Reflectors: Yes · Mounting type: Nuts & bolts · Number of fixing points: 1 pcs · Pony OEM number: P777 · Puch OEM number: 321.1.55.100.0
CHF 9.50
Hot 
Rear light ULO | Sachs, Puch
Width: 57 mm · Height: 90 mm · Color: Chrome · Color: red · Material: Aluminum · Material: Steel · Test mark: none · Depth: 55 mm · Bulb holder: E10 · Ø Receptacle: 5 mm · Tension: 6 V · Brake light: No · Battery operated: No · Reflectors: Yes · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
CHF 58.90
Not in stock
Rear light Cube black | Gilera Citta / Suzuki PV50
Material: Plastic · Test mark: none · Width: 70 mm · Height: 80 mm · Bulb holder: Soffit pear · Color: black · Color: red · Mounting type: Nuts · Number of fixing points: 2 pcs · Tension: 6 V · Tension: 12 V · Brake light: Yes · Battery operated: No · Reflectors: Yes
CHF 19.90
Explore categories from Electrics & light
Moped fans also bought
MMB Speedometer 60 km/h, Ø 48 mm (black dial) NOS
Manufacturer: MMB Instrumente · Material: Metal · Material: Plastic · Surface: chrome-plated · Ø outside: 50.4 mm · Maximum speed: 60 Km/h · Lighting: Light slit · Color: Chrome · Signal type Tacho: analog · Color: black · Color: red · Color: white · 4-edge speedometer cable: 1.8 mm · Total height: 70 mm · Thread type: MF10x1 (fine pitch thread) · Ø Receptacle: 48 mm · Depth: 50 mm
CHF 59.90
swiing® revival 80° carburetor pipe bend M6x0.75
Manufacturer: BING · Manufacturer: swiing® revival parts · Width across flats nut: 7 mm · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Height: 35 mm · Ø outside: 6 mm · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 80 ° · Total length: 41.5 mm · Total length: 50 mm
CHF 6.90
GPO Speedometer Drive, 16" with Bracket, 11 mm Axle (for VDO Speedometer Cable)
Manufacturer: GPO · Place of use: left · Place of use: right · Ø axle: 11 mm · Material: Aluminum · Wheel size: 16 " · Ø outside: 41 mm · 4-edge speedometer cable: 1.8 mm · 4-edge speedometer cable: 2.6 mm · Thread type: MF10x1 (fine pitch thread) · Ø mounting hole: 11 mm
CHF 24.90
GPO speedometer drive 16" (for VDO speedometer cable) | Piaggio Ciao, SI, Bravo
Manufacturer: GPO · Material: Aluminum · Place of use: left · Place of use: right · Wheel size: 16 " · 4-edge speedometer cable: 1.8 mm · 4-edge speedometer cable: 2.6 mm · Ø outside: 41 mm · Ø mounting hole: 11 mm · Ø axle: 11 mm · Thread type: MF10x1 (fine pitch thread) · Piaggio OEM number: 141303 · Piaggio OEM number: 186235 · Piaggio OEM number: 274958
CHF 24.90
Working late? Evening hours on Thursday until 20:00
