High-end CNC aluminum transmission cooler for your moped / moped with Puch E50 engine.
Thanks to improved cooling, the clutch works more stress-free. However, this technical miracle also lowers the temperature at the cylinder head.
All components from your original engine can be used, only the cooling fin is fitted in between. Due to the different threads, you have a variety of connection options, such as a temperature sensor.
The following components are included in the scope of delivery:
1x cooling fin, black anodized aluminium
2x seal
1x aluminium bushing
3x O-ring seal
1x hose nozzle
1x circlip / retaining ring
4x countersunk hexagon socket screws M6 x 55 (fastening of cooler / coupling cover)
| Material | Aluminum |
| Surface | anodized |
| Color | black-matt |
| Ø outside | 150 mm |
| Width | 32 mm |
| Ø inside | 107 mm |
| Puch | E50 |
Accessories & related products
Explore categories from Gearbox & housing (motor)
Moped fans also bought
Hot 
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Thread type: MF12x1 (fine pitch thread) · Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Reserve level: 70 mm
CHF 9.90
swiing® ingenious pull-wire starter PVL ignition | Puch E50
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: raw · Color: Chrome · Ignition system: PVL · Ø outside: 130 mm · Number of fixing points: 2 pcs · Hole spacing: 138 mm · Height: 80 mm · Total length: 170 mm · Width: 150 mm
CHF 149.90
swiing® revival Stud Bolt Set M6x106 | Puch
Thread type: M6x1 (standard thread) · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 106 mm · Drive: External hexagon · Diameter: 5.9 mm · Nominal diameter (thread): 6 mm · Thread length: 13 mm · Thread length: 18.5 mm · Width across flats: 10 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
CHF 7.40
PVL Analog Ignition Coil 105458 / 458115
Manufacturer: PVL · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning · Color: black · Place of use: External (outside the ignition) · Number of fixing points: 2 pcs · Mounting type: Screws · Ø mounting hole: 6 mm
CHF 98.90
PVL stator "1443" ignition
Manufacturer: PVL · Material: Aluminum · Area of application: High End · Area of application: MX · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Color: black · Number of cables: 2 pcs · Number of fixing points: 3 pcs
CHF 98.90
Hot
GPO fuel tap horizontal M12x1 (with union nut) bottom outgoing | Puch Maxi S, N
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Aluminum · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Mounting type: Union nut · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Puch OEM number: 349.3.22.030.0 · Puch OEM number: 349.4.22.030.0
CHF 9.90
Polini air filter BIG EVO Ø 28/35/42/45/49/55 mm oval / straight
Manufacturer: Polini · Material: Foam · Camouflaged: No · Material: Rubber · Area of application: Tuning · Color: black · Color: blue · Width: 150 mm · Filter type: Foam · Height: 100 mm · Total length: 140 mm · Length rubber part: 13 mm · Ø Internal connection: 28 mm · Ø Internal connection: 35 mm · Ø Internal connection: 42 mm · Ø Internal connection: 45 mm · Ø Internal connection: 49 mm · Ø Internal connection: 55 mm · Mounting type: Plug connection clamped · Mounting type: Screwed clamp
CHF 59.90
Working late? Evening hours on Thursday until 20:00
