
Diaphragm adapter with AM6 mounting, compatible with your Puch moped equipped with a Polini cylinder.
This diaphragm housing connects the standard Polini mounting pattern on the cylinder to an AM6 diaphragm block. This allows you to mount a Minarelli AM6 diaphragm insert—the same type used in Puch Gilardoni setups—onto your Polini racing cylinder.
The four-valve design is intended as an alternative to conventional 4-valve diaphragm systems and offers a generous flow rate for powerful engines with larger carburetors.
The adapter is mounted using four M5 x 12 mm hex socket screws. The mounting holes are large enough to accommodate M6 screws if necessary.
Note: According to the supplier, this adapter can be used on the Tomo A35 and Peugeot 103. However, space may be tight, requiring some modification.
You can find diaphragm blocks, gaskets, screws, and intake manifolds in the accessories section.
| Material | Aluminum |
| Area of application | Tuning, Racing |
| Thread type | M6x1 (standard thread) |
| Color | black |
| Ø inside | 32 mm, 35.95 mm, 39 mm, 44 mm |
| Hole spacing inlet | 32 mm, 36 mm, 38 mm |
| Hole pattern [mm] | 34.8 x 59.9 |
| Total length | 73 mm |
| Number of fixing points | 8 pcs |
| Total height | 54.1 mm |
| Mounting type | Screws |
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
Stage6 8-Valve Diaphragm by Moto Tassinari (Gilardoni italkit)
Width: 49 mm · Manufacturer: Stage6 · Material: Plastic · Surface: raw · Area of application: High End · Number of flaps: 8 pcs · Membrane material: Carbon · Thick membrane platelets: 0.3 mm · Mounting type: Screws · Hole pattern [mm]: 60 x 34.8 mm · Number of fixing points: 4 pcs · Ø mounting hole: 6.6 mm · Total length: 77 mm
CHF 114.90
Membrane transpacer Gilardoni italkit rectangle 6 mm aluminum | Puch ZA50
Width: 47.8 mm · Total length: 72.8 mm · Material: Aluminum · Surface: blank · Thickness: 6.15 mm · Mounting type: Screws · Number of fixing points: 4 pcs · Ø mounting hole: 5.4 mm · Hole pattern [mm]: 59 x 34.5 · Area of application: Tuning
CHF 26.90
Polini 4-Valve Diaphragm
Width: 47.9 mm · Total length: 72.9 mm · Manufacturer: Polini · Material: Plastic · Material: Sheet metal (steel) · Surface: raw · Number of flaps: 4 pcs · Membrane material: Carbon · Thick membrane platelets: 0.3 mm · Mounting type: Stud bolts & nuts · Number of fixing points: 4 pcs · Camouflaged: No · Hole pattern [mm]: 35 x 60 · Area of application: Tuning
CHF 79.90
Normio M5x12 Cylinder Head Hex Head Screw, Zinc-Plated
Manufacturer: Normio · Material: Steel · Surface: galvanized (blue) · Thread type: M5x0.8 (standard thread) · Total length: 17 mm · Drive: Hexagon socket · Screw head: Cylinder head · Ø External head: 8.5 mm · Shank: No · Nominal diameter (thread): 5 mm · Thread length: 12 mm · Strength class: 8.8
CHF 0.90
Explore categories from Carburetor & intake system
Moped fans also bought
Continental 2.25 x 16" tires KKS
Inventory-managed: No · Manufacturer: Continental · Tire width: 2.25 " · Color: black · Tire width [mm]: 57.15 · Width: 2 1/4 " · Old designation: 20 x 2.25 " · Speed index: B = 50 km/h · Load capacity index: 38 = 132 kg · Profile type: KKS 10 · Tire type: Allround · White wall: No · Wheel size: 16 " · Tubeless (yes/no): Tubetype TT (requires hose)
CHF 49.90
Normio M5x12 Cylinder Head Hex Head Screw, Zinc-Plated
Manufacturer: Normio · Material: Steel · Surface: galvanized (blue) · Thread type: M5x0.8 (standard thread) · Total length: 17 mm · Drive: Hexagon socket · Screw head: Cylinder head · Ø External head: 8.5 mm · Shank: No · Nominal diameter (thread): 5 mm · Thread length: 12 mm · Strength class: 8.8
CHF 0.90







