The Ø 38 mm (50cc) racing cylinder kit from the quality brand Parmakit is suitable for Puch Maxi S, N | X30 Sport NS, NL | X30 Sport NG-2AH and Supermaxi.
This racing kit is of the best quality and is known for its long service life.
This racing kit should preferably be used with a 22 mm exhaust, i.e. a 2-bend or 22 mm manifold, so that the exhaust gases are also transported away and no heat build-up occurs.
The gasket set is not included in the scope of delivery. You can find the matching gasket set in the accessories section.
| Manufacturer | Parmakit |
| Material | Aluminum |
| Surface | sandblasted |
| Displacement | 50 ccm |
| Area of application | Tuning |
| Crankshaft stroke | 43 mm |
| Ø piston pin (B) | 12 mm |
| Nominal diameter | 38 mm |
| Ø cylinder neck | 47.8 mm |
| Number of fixing points | 4 pcs |
| Camouflaged | No |
| Inlet window | 21.8 x 15.5 |
| Ø outlet inside | 20 mm |
| Thread inlet | M6x1 (standard thread) |
| Hole spacing outlet | 42 mm |
| Decompressor | Yes |
| Hole spacing inlet | 38.5 mm |
| Outlet type | straight |
| Thread outlet | M6x1 (standard thread) |
| Hole pattern [mm] | 44 x 44 |
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Ratings
Accessories & related products
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Area of application: Standard · Width: 125 mm · Height: 55 mm · Number of fixing points: 4 pcs · Total length: 135 mm · Ø cylinder: 38 mm · Candle thread: short · Decompressor: No · Hole pattern [mm]: 44 x 44
CHF 32.90
GPO gasket set cylinder original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Thickness: 0.3 mm · Thickness: 0.4 mm · Thickness: 1.8 mm · Ø cylinder: 38 mm · Ø outlet inside: 22 mm · Decompressor: Yes · Hole spacing outlet: 42 mm · Hole spacing inlet: 32 - 38 mm · Number of components: 4 pcs · Hole pattern [mm]: 44 x 44 mm
CHF 7.40
swiing® ingenious needle roller bearing 12/15/14.2 original silver cage
Bearing type: Needle roller and cage assembly · Manufacturer: swiing® ingenious parts · Bearing cage: Silver cage · Width: 14.2 mm · Ø inside: 12 mm · Ø outside: 15 mm · Dimension needle bearing: 12/15 x 14.2 · Alternative version of the Pony OEM number: A4222 · Alternative version of the Sachs OEM number: 0232 157 001 · Tomos OEM number: 035548
CHF 11.90
Moped fans also bought
swiing® revival clamping screw M5x20 Bing carburetor
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Color: silver · Width across flats SW: 8 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Shank: Yes · Ø shaft: 3.8 mm · Thread type: M5x0.8 (standard thread) · Shank length: 11.5 mm · Total length: 24.1 mm · Thread length: 8.5 mm · Area of application: Original · Pony OEM number: A4593 · Sachs OEM no.: 0962 066 000
CHF 2.90
DUPLI-COLOR acrylic paint RAL 9016 white glossy 400 ml
Manufacturer: DUPLI-COLOR · Temperature resistance (min.): 0 - 80 °C · Lacquer type: Acrylic lacquer · Contents [ml]: 400 ml · Color: white · Hazard warning: Causes serious eye irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Paint & varnish
CHF 16.90
CHF 42.25/l
Collection only possible with online purchase and appointment.
