Shaft seal ring 15x24x7 mm for use on your Zündapp Belmondo moped / moped.
This shaft seal ring (colloquially known as a radial shaft seal) made of nitrile rubber is temperature-resistant up to 100°C.
Ø inner: 15 mm
Ø outer: 24 mm
Width: 7 mm
Material: NBR
Temperature-resistant: -30 to +100 °C, briefly up to 120 °C
Type: AS - With rubberized outer casing, a sealing lip and a dust lip.
| Temperature resistance (min.) | -30 - 100 °C |
| Shaft seal type | AS - With rubberized outer casing / one sealing lip / one dust lip. |
| Ø inside | 15 mm |
| Ø outside | 24 mm |
| Manufacturer | Zündapp |
| Width | 7 mm |
| Material | NBR |
| Surface | rubberized |
| Zündapp Belmondo | |
| Zündapp | 247 Motor |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
CHF 21.90
CHF 2’190.00/l
Loctite 638 Joining shaft-hub high-strength 10 ml
Temperature resistance (min.): -75 - 150 °C · Color: green · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Hazard warning: Causes serious eye damage · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Danger · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Chemistry · Adhesion: high-strength · Type of application: 1K · Gap dimension (max.): 0.25 mm · Alignment time: 300 sec · Breakaway torque (according to material): 23 N/m · Breakaway torque (according to material): 25 N/m · Breakaway torque (according to material): 57 N/m
CHF 21.90
CHF 2’190.00/l
Oil seal FPM 15/24/7 BS | Zündapp Belmondo (Type 247)
Temperature resistance (min.): -30 - 200 °C · Shaft seal type: BS - With sheet metal outer casing / one sealing lip / one dust lip. · Manufacturer: Zündapp · Material: FPM - Fluororubber · Width: 7 mm · Ø outside: 24 mm · Ø inside: 15 mm
CHF 9.70
Moped fans also bought
Oil seal NBR 17/40/7 A DUO | Puch E50
Temperature resistance (min.): -30 - 100 °C · Shaft seal type: A DUO - With rubberized outer casing / two sealing lips. · Manufacturer: Puch · Material: NBR · Surface: rubberized · Ø inside: 17 mm · Ø outside: 40 mm · Area of application: Standard · Width: 7 mm
CHF 5.10
NTN 6203 Ball bearing 17/40/12
Material: Steel · Bearing cage: Sheet steel cage ball-guided · Inner ring width: 12 mm · Manufacturer: NTN · Bearing clearance: CM (special/noise-reduced) · Surface: blank · Stock number: 6203 · Bearing type: Deep groove ball bearing · Width: 12 mm · Ø outside: 40 mm · Ø inside: 17 mm · Ball bearing closed: No
CHF 6.50
Collection only possible with online purchase and appointment.
