Special needle sleeve, which was installed on some engines with the corresponding gearwheel. The freewheel sleeve is pressed into the fit of the gearwheel of the first gear.
Can be used on Sachs 503 AB / AC / ADV / ABL automatic engines.
Attention: For the installation of this needle sleeve, the gear must have an inner diameter of 25 mm (there are different versions).
Ø inner: 19 mm
Ø outer: 25.5 mm
Height: 25.3 mm
Type: HCB 121616
Quality product from the Japanese manufacturer NSK.
Details
| Stock number | HCB 121616 |
| Manufacturer | NSK |
| Material | Steel, Sheet metal (steel), Plastic |
| Ø inside | 19 mm |
| Ø outside | 25.5 mm |
| Height | 25.3 mm |
Suitable for the following models
| Sachs | 503 - ABL, AB, AC, ADV |
Moped fans like you also bought:
Oil seal NBR 15/30/7 B AS | Sachs 503, 50/2
Simmering type: B - With sheet metal outer casing / one sealing lip. · Manufacturer: Sachs · Material: NBR · Width: 7 mm · Ø inside: 15 mm · Ø outside: 30 mm · Temperature resistance (min.): -30 - 100 °C · Pony OEM number: A1830 · Sachs OEM no.: 0250 090 000
CHF 5.40
NSK BO15 shoulder ball bearing 15/40/10 (A4502)
Bearing type: Shoulder bearing · Bearing cage: Brass cage ball-guided · Stock number: BO15 · Inner ring width: 10 mm · Manufacturer: NSK · Material: Brass · Area of application: Standard · Material: Steel · Surface: blank · Ø inside: 15 mm · Ø outside: 40 mm · Width: 10 mm · Ball bearing closed: No · Pony OEM number: A4502 · Sachs OEM no.: 0932 007 001
CHF 24.90
NSK 6201 ball bearing 12/32/10
Bearing type: Shoulder bearing · Bearing cage: "-" Sheet steel cage ball-guided · Stock number: 6201 · Inner ring width: 10 mm · Manufacturer: NSK · Bearing clearance: CM (special/noise-reduced) · Groove ring: No · Area of application: Standard · Material: Steel · Surface: blank · Ø inside: 12 mm · Ø outside: 32 mm · Width: 10 mm · Ball bearing closed: No
CHF 8.50
swiing® revival gearbox cover gasket | Sachs 503 AAL, ABL, AB, AC, ADV, 2AL, 2BL (A1888)
Manufacturer: swiing® revival parts · Material: Sealing paper · Total length: 200 mm · Color: sand-colored · Width: 130 mm · Thickness: 0.35 mm · Number of components: 1 pcs · Number of fixing points: 6 pcs · Pony OEM number: A1888 · Sachs OEM no.: 0250 150 000
CHF 5.40
Oil seal NBR 15/30/5.5 A crankshaft | Sachs (A4215 & A5602)
Place of use: Crankshaft · Temperature resistance (min.): -30 - 100 °C · Simmering type: A - With rubberized outer part / one sealing lip. · Manufacturer: Sachs · Material: NBR · Surface: rubberized · Ø inside: 15 mm · Ø outside: 30 mm · Width: 5.5 mm · Pony OEM number: A5602 · Sachs OEM no.: 0230 111 100
CHF 7.90
Collection only possible with online purchase and appointment.
