
High-quality, simple number plate holder made of black plastic with «mofakult» imprint for your moped / moped.
The number holder is attached to the rear mudguard or the side number holder. There are seven attachment points available for this purpose. If new holes need to be drilled into the mudguard, marking them in advance makes it easier to position them optimally.
After the license plate holder has been attached, the number plate is then fastened with two M5 screws. Extra threaded holes have been embedded in the plastic for this purpose. The use of spring washers is recommended to secure the number plate.
You can find the corresponding screws for the number frame in the accessories section.
Merchandise product of the Swiss quality brand mofakult Merch.
| Manufacturer | mofakult Merch |
| Thread length | 6 mm |
| Material | Plastic |
| Color | black |
| Total length | 175 mm |
| Height | 11 mm |
| Mounting type | Nuts & bolts |
| Ø mounting hole | 6 mm |
| Width | 108 mm |
| Hole spacing | 50 mm |
| Number of fixing points | 9 pcs, 2 pcs |
| Thread type | M5x0.8 (standard thread) |
Accessories & related products
Plastic license plate holder (CH version)
Manufacturer: Made in Switzerland · Material: Brass · Material: Plastic · Color: black · Thread type: M5x0.8 (standard thread) · Number of fixing points: 9 pcs · Width: 108 mm · Mounting type: Nuts & bolts · Height: 11 mm · Total length: 175 mm · Ø mounting hole: 6 mm · Hole spacing: 50 mm · Thread length: 6 mm
CHF 7.90
Normio Flanged Washer M4–M12 (Assorted Sizes), Galvanized
Ø inside: 4.5 mm · Ø inside: 5.5 mm · Ø inside: 6.35 mm · Ø inside: 7.4 mm · Ø inside: 10.8 mm · Ø inside: 12.8 mm · Manufacturer: Normio · Material: Steel · Surface: galvanized (blue) · Thread size: M10 · Thread size: M12 · Thread size: M4 · Thread size: M5 · Thread size: M6 · Thread size: M7 · Thread size: M8
CHF 0.30
Normio M8x16 Cylinder Head Screw, Low Profile, Hex Socket, Zinc-Plated
Manufacturer: Normio · Material: Steel · Surface: galvanized (blue) · Thread type: M8x1.25 (standard thread) · Drive: Hexagon socket · Screw head: Cylinder head · Nominal diameter (thread): 8 mm · Thread length: 16 mm · Width across flats: 5 mm · Strength class: 8.8
CHF 1.40
Normio Spring Washer M6 6.2/11.8/1.6, Galvanized
Ø inside: 6.4 mm · Ø outside: 11.4 mm · Manufacturer: Normio · Material: Spring steel · Surface: galvanized (blue) · Thread size: M6 · Thickness: 1.8 mm · Nominal diameter inside: 6 mm · Nominal diameter (thread): 6 mm · Area of application: Standard
CHF 0.40
Normio M6x22 Hex Head Screw, Galvanized
Manufacturer: Normio · Material: Steel · Surface: galvanized (blue) · Color: silver · Number of components: 1 pcs · Thread type: M6x1 (standard thread) · Drive: External hexagon · Screw head: Hexagon · Nominal diameter (thread): 6 mm · Total length: 26 mm · Area of application: Standard · Strength class: 8.8 · Width across flats: 10 mm · Thread length: 22 mm
CHF 1.10
Normio M6 Galvanized Nut
Height: 4.8 mm · Manufacturer: Normio · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 0.8D · Thread type: M6x1 (standard thread) · Drive: External hexagon · Nominal diameter (thread): 6 mm · Width across flats: 10 mm · Strength class: 8 · Area of application: Standard
CHF 0.50
Normio Screw M5x12, Pan Head, Phillips, Zinc-Plated
Total length: 16 mm · Ø External head: 10 mm · Manufacturer: Normio · Material: Steel · Surface: galvanized (blue) · Nominal diameter (thread): 5 mm · Screw head: Lens head · Shank: No · Strength class: 4.8 · Drive: Cross recess · Thread type: M5x0.8 (standard thread) · Thread length: 12 mm
CHF 1.00
Normio M5x10 Pan-Head Hex Socket Screw, Zinc-Plated
Total length: 13 mm · Ø External head: 9.5 mm · Manufacturer: Normio · Material: Steel · Surface: galvanized (blue) · Nominal diameter (thread): 5 mm · Screw head: Lens head · Shank: No · Width across flats: 3 mm · Strength class: 10.9 · Drive: Hexagon socket · Thread type: M5x0.8 (standard thread) · Thread length: 10 mm
CHF 0.90
Explore categories from Number holder
Moped fans also bought
Magura Gas/Deco Cable Clamp, Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Number of components: 2 pcs · Ø outside: 5 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Total length: 6 mm · Thread length: 4 mm
CHF 2.00
Fortune / Merrick 2.00-2.25 x 16" / 17" inner tube
Manufacturer: Fortune · Tire width: 2 - 2.5 " · Tire width: 2.25 - 2.5 " · Tire width: 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width: 2 " · Width: 2 1/4 " · Width: 2 1/2 " · Tire height [%]: 100 · Old designation: 20 x 2 " · Old designation: 20 x 2.25 " · Old designation: 20 x 2.5 " · Old designation: 21 x 2 " · Old designation: 21 x 2.25 " · Old designation: 21 x 2.5 " · Valve type: TR4 Auto valve · Wheel size: 16 - 17 " · Wheel size: 17 " · Alternative version of the Puch OEM number: 567.060700 · Alternative version of the Puch OEM number: 901.0863 · Alternative version of the Puch OEM number: 902.0853
CHF 10.50
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Made in Germany · Material: Steel · Color: black · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm
CHF 19.90
ARUSU Headlight with Parking Light, Black | Piaggio Ciao PX, C24
Manufacturer: ARUSU · Area of application: Standard · Test mark: none · Bulb holder: P26s · Housing material: Plastic · Bulb holder: Soffit pear · Color: black · Surface: raw · Lens material: Plastic · Switch included: Yes · Tension: 6 V · Tension: 12 V · Number of fixing points: 2 pcs · Ø External connection: 6 mm · Width: 125 mm · Mounting type: Screws · Height: 90 mm · Speedometer recording: 48 mm · Battery operated: No · Depth: 147 mm · Piaggio OEM number: 584240
CHF 26.90











