37.98 mm piston with two 2 mm rectangular piston rings with flank lock (FS) suitable for Sachs 504/2 ACH and 504/1 ACH mopeds / mopeds.
The detailed dimensions of the piston according to the technical drawing can be found in the details. You can also find out about the relevant piston rings, their stems and locking types on the legend in the pictures.
| Nominal diameter | 38 mm |
| Manufacturer | Meteor |
| Ø outside piston (A) | 37.98 mm |
| Compression height (C) | 28 mm |
| Curvature (D) | 3 mm |
| Total piston height (E) | 53 mm |
| Number of piston rings (F) | 2 pcs |
| Piston ring mold | Rectangular ring |
| Piston ring impact | Flank safety device (FS) |
| Piston ring height | 2 mm |
| Ø piston pin (B) | 12 mm |
| Tolerance group | B |
| Weight piston kit | 77 g |
| Sachs | 504 (without pedal shaft) |
Accessories & related products
Meteor piston 37.97 mm type A | Sachs 504
Nominal diameter: 38 mm · Manufacturer: Meteor · Ø outside piston (A): 37.97 mm · Compression height (C): 28 mm · Curvature (D): 3 mm · Total piston height (E): 53 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Ø piston pin (B): 12 mm · Weight piston kit: 78 g
CHF 56.50
Meteor piston 37.99 mm type C | Sachs 504
Nominal diameter: 38 mm · Manufacturer: Meteor · Ø outside piston (A): 37.99 mm · Compression height (C): 28 mm · Curvature (D): 3 mm · Total piston height (E): 53 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Ø piston pin (B): 12 mm · Tolerance group: C · Weight piston kit: 77 g
CHF 56.50
Explore categories from Piston
Moped fans also bought
Hot 
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø bore: 4 mm · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 128 pcs · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Ø Pin: 3.94 mm
CHF 12.50
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch
CHF 10.90
CHF 24.22/l
Oil seal NBR 15/30/5.5 A crankshaft | Sachs (A4215 & A5602)
Place of use: Crankshaft · Shaft seal type: A - With rubberized outer part / one sealing lip. · Width: 5.5 mm · Manufacturer: Sachs · Material: NBR · Ø inside: 15 mm · Ø outside: 30 mm · Temperature resistance (min.): -30 - 100 °C · Pony OEM number: A5602 · Sachs OEM no.: 0230 111 100
CHF 7.90
Oil seal NBR 15/35/7 AS crankshaft | Sachs 504, 535 (A4214)
Shaft seal type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Manufacturer: Sachs · Material: NBR · Ø inside: 15 mm · Place of use: Crankshaft · Temperature resistance (min.): -30 - 100 °C · Ø outside: 35 mm · Width: 7 mm
CHF 8.90
NTN 6202 Ball bearing 15/35/11
Bearing type: Deep groove ball bearing · Inner ring width: 11 mm · Manufacturer: NTN · Ball bearing closed: No · Bearing clearance: CM (special/noise-reduced) · Bearing cage: Sheet steel cage ball-guided · Groove ring: No · Material: Steel · Width: 11 mm · Stock number: 6202 · Ø inside: 15 mm · Ø outside: 35 mm
CHF 6.90
Gasket set (1A quality) | Sachs 504, 505, 535
Manufacturer: Made in Italy · Material: Copper · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 28 mm · Thickness: 0.3 mm · Thickness: 1 mm · Thickness: 2.6 mm · Number of components: 5 pcs · Hole spacing inlet: 32 mm · Hole pattern [mm]: 81.5 x 51 mm / 58 x 58 mm · Pony OEM number: A4277 · Pony OEM number: A4278 · Pony OEM number: A4279
CHF 15.90
Not in stock
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
