profile
All wishlists Community wishlists
Carousel Image 1
Carousel Image 2
Carousel Image 3

For: Puch

35286

Membrane box for ADDY GME engine housing "der.pruefstand" | Puch E50

CHF 134.90

Incl. 8.1% VAT.

Description

CNC-milled diaphragm housing for the ADDY GME engine case “Der.prüfstand” on your Puch moped.

The diaphragm holder is cleanly finished, fits perfectly, and features a generous opening of 39.5 x 26 mm.
Thanks to the sloped upper surface of the diaphragm housing and the ability to rotate it 180 degrees, you can adjust the angle of the mounted intake manifold and carburetor to be slightly steeper or flatter.

Note: The housing is designed for installation with sealant. If you prefer oil paper, you’ll find suitable sealing paper in the accessories section that you can cut to size yourself.

You’ll also find the matching diaphragm block, intake manifold, and racing housing in the accessories section.

MaterialAluminum
Total length48 mm
Width66 mm
Thread typeM6x1 (standard thread)
Hole spacing52 mm
Hole pattern [mm]37 x 55
Puch

E50

Accessories & related products

Sealing paper set 4 pcs.
undefined

Universal

17871

Sealing paper set 4 pcs.

Manufacturer: Made in Spain · Place of use: Universal · Material: Sealing carton · Material: Sealing paper · Thickness: 0.25 mm · Thickness: 0.4 mm · Thickness: 0.5 mm · Thickness: 1.2 mm

CHF 19.90

Stage6 R/T RT-PWK 28 mm carburetor "Black-Edition"
undefined

Universal

21119

Stage6 R/T RT-PWK 28 mm carburetor "Black-Edition"

Manufacturer: Stage6 R/T · Component group Carburetor: Carburetor complete · Color: black · Surface: varnished · Carburetor type: RT-PWK · Nominal diameter: 28 mm · Ø Air filter connection: 50 mm · Mounting type: Flange · Mounting type: Plug connection · Area of application: Tuning · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread)

CHF 174.90

Stage6 R/T RT-PWK 24 mm carburetor Stage6 "Black-Edition"
undefined

Universal

21120

Stage6 R/T RT-PWK 24 mm carburetor Stage6 "Black-Edition"

Manufacturer: Stage6 R/T · Component group Carburetor: Carburetor complete · Color: black · Surface: varnished · Carburetor type: RT-PWK · Nominal diameter: 24 mm · Ø Air filter connection: 50 mm · Mounting type: Flange · Mounting type: Plug connection · Area of application: Tuning · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread)

CHF 166.90

Not in stock

Athena Athesil sealing compound gray (silicone) 80 ml permanently elastic up to 300 °C
undefined

Universal

32422

Athena Athesil sealing compound gray (silicone) 80 ml permanently elastic up to 300 °C

Temperature resistance (min.): -40 - 300 °C · Manufacturer: Athena · Material: Silicone · Color: gray · Contents: 80 ml · Area of application: Chemistry

CHF 19.90

CHF 248.75/l

Stage6 reed valve block VForce 3 by Moto Tassinari
undefined

For: Universal · Puch

34980

Stage6 reed valve block VForce 3 by Moto Tassinari

Manufacturer: Stage6 · Number of flaps: 8 pcs · Hole spacing: 52 mm

CHF 94.90

Stage6 adapter intake manifold Dell'Orto / Polini CP carburetor 21 mm
undefined

For: Universal · Puch

34981

Stage6 adapter intake manifold Dell'Orto / Polini CP carburetor 21 mm

Manufacturer: Stage6 · Material: Rubber · Hole spacing inlet: 60 mm · Ø inside: 21 mm

CHF 16.90

Not in stock

Stage6 adapter intake manifold Mikuni carburetor 24 mm
undefined

For: Universal · Puch

34982

Stage6 adapter intake manifold Mikuni carburetor 24 mm

Manufacturer: Stage6 · Material: Rubber · Hole spacing inlet: 60 mm · Ø inside: 24 mm

CHF 16.90

Stage6 adapter intake manifold PWK carburetor 19 - 28 mm
undefined

For: Universal · Puch

34983

Stage6 adapter intake manifold PWK carburetor 19 - 28 mm

Manufacturer: Stage6 · Material: Rubber · Hole spacing inlet: 60 mm · Ø inside: 30 mm · Ø inside: 33 mm

CHF 16.90

Stage6 adapter intake manifold PWK carburetor from 30 mm
undefined

For: Universal · Puch

34984

Stage6 adapter intake manifold PWK carburetor from 30 mm

Manufacturer: Stage6 · Material: Rubber · Hole spacing inlet: 60 mm · Ø inside: 35 mm · Ø inside: 40 mm

CHF 16.90

Not in stock

ADDY engine housing GME "der.pruefstand-Edition" | Puch E50
undefined

For: Puch

35283

ADDY engine housing GME "der.pruefstand-Edition" | Puch E50

Manufacturer: ADDY · Material: Aluminum

CHF 429.90

ADDY engine housing GME spindled "der.pruefstand-Edition" | Puch E50
undefined

For: Puch

35285

ADDY engine housing GME spindled "der.pruefstand-Edition" | Puch E50

Manufacturer: ADDY · Material: Aluminum

CHF 479.90

Inox
Intake manifold 25 mm ADDY GME engine housing "der.pruefstand" Inox | Puch E50
undefined

For: Universal · Puch

35288

Intake manifold 25 mm ADDY GME engine housing "der.pruefstand" Inox | Puch E50

Manufacturer: Made in Switzerland · Material: Chrome steel (colloquially known as stainless steel) · Ø inside: 25 mm · Hole pattern [mm]: 55 / 60

CHF 64.90

Inox
Intake manifold 29 mm ADDY GME engine housing "der.pruefstand" Inox | Puch E50
undefined

For: Universal · Puch

35289

Intake manifold 29 mm ADDY GME engine housing "der.pruefstand" Inox | Puch E50

Manufacturer: Made in Switzerland · Material: Chrome steel (colloquially known as stainless steel) · Ø inside: 29 mm · Hole pattern [mm]: 55 / 60

CHF 64.90

Malossi reed valve block MHR TEAM VL16
undefined

For: Universal · Italjet

35335

Malossi reed valve block MHR TEAM VL16

Manufacturer: Malossi · Camouflaged: No · Material: Plastic · Number of flaps: 2 pcs · Membrane material: Carbon · Thick membrane platelets: 0.35 mm · Ø mounting hole: 6.6 mm · Total length: 66.2 mm · Width: 48.3 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Area of application: Racing · Hole spacing: 53 mm

CHF 91.90

Explore categories from Carburetor & intake system

S-10-40-010_Ansaugstutzen
Intake manifold & intake rubber
S-10-40-020_Membran_System
Membrane system
S-10-40-050_Luftfilter
Air filter
S-10-40-040_Duesen
Nozzles
S-10-40-030_Benzinzufuhr
Fuel supply
S-10-40-060_Vergaser
Carburetor

Moped fans also bought

Hot Hot
Gilardoni italkit 47 mm cylinder kit 75 ccm | Puch
undefined

For: Puch

10386

Gilardoni italkit 47 mm cylinder kit 75 ccm | Puch

Manufacturer: Gilardoni italkit · Camouflaged: No · Surface: sandblasted · Material: Aluminum · Nominal diameter: 47 mm · Area of application: Tuning · Outlet type: slanted · Decompressor: No

CHF 294.90

Inox
MBR retaining plate shaft seal on ignition side "Racing" Inox
undefined

For: Puch

15216

MBR retaining plate shaft seal on ignition side "Racing" Inox

Manufacturer: MBR · Material: Chrome steel (colloquially known as stainless steel) · Surface: brushed · Color: silver · Ø inside: 25.3 mm · Ø outside: 89.4 mm · Area of application: Tuning · Number of fixing points: 4 pcs

CHF 18.90

MBR spur gear 94 teeth "Racing" straight | Puch E50
undefined

For: Puch

21491

MBR spur gear 94 teeth "Racing" straight | Puch E50

Manufacturer: MBR · Surface: hardened & ground · Material: Steel · Recording type: Interlocking · Toothing type: straight toothed · Ø axle: 17 mm · Number of teeth: 94 pcs · Ø outside: 145 mm

CHF 199.90

Stage6 reed valve block VForce 3 by Moto Tassinari
undefined

For: Universal · Puch

34980

Stage6 reed valve block VForce 3 by Moto Tassinari

Manufacturer: Stage6 · Number of flaps: 8 pcs · Hole spacing: 52 mm

CHF 94.90

Stage6 adapter intake manifold PWK carburetor 19 - 28 mm
undefined

For: Universal · Puch

34983

Stage6 adapter intake manifold PWK carburetor 19 - 28 mm

Manufacturer: Stage6 · Material: Rubber · Hole spacing inlet: 60 mm · Ø inside: 30 mm · Ø inside: 33 mm

CHF 16.90

ADDY engine housing GME "der.pruefstand-Edition" | Puch E50
undefined

For: Puch

35283

ADDY engine housing GME "der.pruefstand-Edition" | Puch E50

Manufacturer: ADDY · Material: Aluminum

CHF 429.90

ADDY engine housing GME spindled "der.pruefstand-Edition" | Puch E50
undefined

For: Puch

35285

ADDY engine housing GME spindled "der.pruefstand-Edition" | Puch E50

Manufacturer: ADDY · Material: Aluminum

CHF 479.90

Inox
Intake manifold 25 mm ADDY GME engine housing "der.pruefstand" Inox | Puch E50
undefined

For: Universal · Puch

35288

Intake manifold 25 mm ADDY GME engine housing "der.pruefstand" Inox | Puch E50

Manufacturer: Made in Switzerland · Material: Chrome steel (colloquially known as stainless steel) · Ø inside: 25 mm · Hole pattern [mm]: 55 / 60

CHF 64.90

Inox
Intake manifold 29 mm ADDY GME engine housing "der.pruefstand" Inox | Puch E50
undefined

For: Universal · Puch

35289

Intake manifold 29 mm ADDY GME engine housing "der.pruefstand" Inox | Puch E50

Manufacturer: Made in Switzerland · Material: Chrome steel (colloquially known as stainless steel) · Ø inside: 29 mm · Hole pattern [mm]: 55 / 60

CHF 64.90

Set
ADDY engine housing set GME "der.pruefstand-Edition" | Puch E50
undefined
angle-right

For: Puch

35344

ADDY engine housing set GME "der.pruefstand-Edition" | Puch E50

CHF 649.90