Clutch springs suitable for the KTM SX50 clutch for Puch Maxi mopeds / mopeds with E50 engine.
Specially developed for racing purposes. Designed for the highest loads.
The set consists of 3 springs and 3 washers.
The clutches engage at approx. 7500 - 9500 rpm, depending on the oil.
In order to change the clutch engagement speed, the enclosed shims can be installed. This increases the clutch engagement speed by approx. 500 rpm.
The springs are made of stainless steel and can withstand temperatures of up to 240 degrees.
You can find more spring strengths in the accessories section.
| Spring design | Pressure spring |
| Number of components | 6 pcs |
| Manufacturer | MBR |
| Area of application | Racing |
| Puch | E50 |
Ratings
Accessories & related products
MBR Clutch KTM SX50 | Puch E50
Manufacturer: MBR · Material addition: Aluminum · Material: Steel · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning
CHF 339.90
Explore categories from Clutch
Moped fans also bought
- 12 %
Hot 
KMC drive chain 415H (reinforced) 128L
Chain type: 415H · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Rolling circumference: 1626 mm · Chain pitch: 1/2" x 3/16" · Ø bore: 4 mm · Number of chain links: 128 pcs · Chain lock type: Spring lock · Ø Pin: 3.94 mm
CHF 12.50
CHF 10.90
Inox
Hot
GPO license plate holder Inox (CH version)
Ø mounting hole: 5 mm · Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Total length: 145 mm · Thread length: 8 mm · Mounting type: Nuts & bolts · Hole spacing: 30 mm · Hole spacing: 50 mm · Thread type: M5x0.8 (standard thread) · Width: 105 mm · Height: 5.3 mm · Number of fixing points: 2 pcs
CHF 10.90
Not in stock
Not so nice 
Main stand black (budget) | Puch Maxi S, P1 / X30 NS, NL, NG
Material: Steel · Surface: varnished · Color: black · Stand base - center mount (A): 207 mm · Total width of stand base (B): 217 mm · Wide receptacle (C): 66 mm · Ø Receptacle (D): 18 mm · Spring nipple distance - center pivot axis (E): 75 mm · Wide upright foot (F): 20 mm · Wide upright foot (F): 50 mm · Total height: 220 mm
CHF 19.90
swiing® ingenious bottom bracket bushing brass | Puch Maxi, X30 Sport, Velux, NG-2AH
Bearing type: Plain bearing · Manufacturer: swiing® ingenious parts · Material: Brass · Surface: blank · Color: bronze · Total length: 19 mm · Ø inside: 16.1 mm · Ø Bundle: 23.9 mm · Ø outside: 20 mm · Puch OEM number: 349.1.42.005.1
CHF 9.90
Collection only possible with online purchase and appointment.
