Reinforced, CNC-milled clutch bell for racing purposes. Designed for the highest loads.
Fits E50 engines of all Puch Maxi mopeds.
The original clutch and starter clutch can be used with this basket.
Reinforced press fit. No more welding points necessary.
21 teeth, helically toothed.
The special sliding bushes are included in the scope of delivery.
Details
| Manufacturer | MBR |
| Area of application | Tuning |
| Material | Steel |
| Color | silver |
| Ø inside | 17 mm, 15 mm |
| Toothing type | helical toothed |
| Ø outside | 99.5 mm |
| Recording type | Interlocking |
| Height | 49.2 mm |
| Number of teeth | 21 pcs |
| Ø Receptacle | 31 mm |
Suitable for the following models
| Puch | E50 |
Moped fans like you also bought:
swiing® ingenious clutch springs reinforced (+20%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Total length: 28 mm · Manufacturer: swiing® ingenious parts · Area of application: Tuning · Material: Spring steel · Color: blue · Surface: coated · Number of components: 3 pcs · Ø wire: 1.7 mm · Ø inside: 4.8 mm · Ø outside: 8.3 mm
CHF 17.90
swiing® revival screw set Motor Inox | Puch E50
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Surface: blank · Drive: Hexagon socket · Drive: Slot · Screw head: Countersunk head · Screw head: Cylinder head · Area of application: Standard · Puch OEM number: 900.1216 · Puch OEM number: 900.1308
CHF 19.90
swiing® ingenious crankshaft High End with mounted bearings (Version 2.0) | Puch E50
Weight: 968 g · Manufacturer: swiing® ingenious parts · Material: Aluminum · Cheek type: Full cheeks · Material: Steel · Crankshaft stroke: 43 mm · Thread type: MF10x1 (fine pitch thread) · Connecting rod length center-center: 90 mm · Number of gears: 1 pcs · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Thread length: 11 mm · Thread length: 15 mm · Ø crank webs: 69.9 mm · Ø Connecting rod eye: 15 mm · Ø piston pin (B): 12 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Length 3rd paragraph: 25 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.3 mm · Area of application: High End · Area of application: Racing · Area of application: Tuning
CHF 179.90
swiing® revival screw set ignition Inox | Puch
Manufacturer: swiing® revival parts · Number of components: 21 pcs · Material: Chrome steel (known as Nirosta®) · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Drive: Cross recess · Alternative version of the Puch OEM number: 900.1509 · Alternative version of the Puch OEM number: 900.3202
CHF 9.90
GPO cylinder stud bolt set special M6x106 mm galvanized | Puch
Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Diameter: 7 mm · Thread type: M6x1 (standard thread) · Drive: External hexagon · Thread length: 15 mm · Thread length: 19 mm · Width across flats SW: 10 mm · Strength class: 10 · Strength class: 10.9 · Total length: 106 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
CHF 19.80
Collection only possible with online purchase and appointment.
