«X Special Belt» drive belt with 30° angle for your Piaggio Ciao moped / moped with Vario drive and installed over-range kit from Malossi.
This drive belt is used as standard in conjunction with the 107 mm converter pulleys.
Note: Due to its dimensions, this timing belt is not suitable for use with standard variomatic drives with 13 mm wide belts.
For Piaggio Ciao models, the frame must be adapted so that the overrange kit can be installed.
Alternative belts, the complete overrange kit and other add-on parts can be found in the accessories section.
Quality product from the Italian manufacturer Malossi.
| Manufacturer | Malossi |
| Outer width | 15.5 mm |
| Rolling circumference | 970 mm |
| Belt profile | toothed / serrated |
| Height | 8.5 mm |
| Gearbox type | Vario |
| Piaggio | Ciao - P , SC , PX , C24 |
Ratings
Accessories & related products
Explore categories from Variomatic belt drive
Moped fans also bought
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Width across flats trigger: 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Number of components: 1 pcs · Material: Steel · Area of application: (Dis)assembly tool · Total length: 55 mm · Total length: 75 mm · Surface: blackened · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Strength class: 8.8
CHF 9.90
M10 sealing ring Fiber
Material: Fiber · Surface: raw · Ø outside: 13.8 mm · Ø inside: 10 mm · Place of use: Carburetor · Place of use: Motor housing · Thickness: 1.6 mm · Area of application: Standard · Pony OEM number: A1817 · Pony OEM number: A5650 · Puch OEM number: 27071 · Sachs OEM no.: 0250 042 001 · Sachs OEM no.: 0650 131 000
CHF 1.60
DUCATI ignition coil (1A quality)
Cable length: 37 mm · Manufacturer: DUCATI · Ø Internal flywheel: 90 mm · Color: black · Ø cable holder: 5.9 mm · Height: 17 mm · Place of use: Internal (in the ignition) · Total length: 76.5 mm · Number of fixing points: 2 pcs · Area of application: Original · Area of application: Standard · Ø mounting hole: 4.6 mm · Hole spacing: 54 mm · Mounting type: Screws · Pony OEM number: A2114 · Alternative version of the Pony OEM number: A2116 · Alternative version of the Pony OEM number: A2118 · Pony OEM number: A5524 · Alternative version of the Sachs OEM number: 0265 142 002 · Alternative version of the Sachs OEM number: 0265 142 004 · Sachs OEM no.: 0265 132 100 · Sachs OEM no.: 0265 203 001
CHF 64.90
Oil seal 13/22/4 A NBR gearbox Vario original | Piaggio Ciao, SI, Bravo, Boxer
Material: NBR · Manufacturer: Piaggio · Surface: rubberized · Shaft seal type: A - With rubberized outer part / one sealing lip. · Ø outside: 22 mm · Ø inside: 13 mm · Width: 4 mm · Temperature resistance (min.): -30 - 100 °C · Piaggio OEM number: 240222
CHF 4.70
swiing® ingenious 19 mm PHBG intake manifold Speed Engine | Piaggio Ciao, SI, Bravo
Ø inside: 19 mm · Manufacturer: swiing® ingenious parts · Mounting type: Screws · Number of fixing points: 2 pcs · Material: Aluminum · Color: graphite colors · Area of application: Tuning · Surface: anodized · Ø External connection: 24 mm · Hole spacing inlet: 36 mm
CHF 29.90
GPO 19.5 mm PHBG AS carburetor hand choke (Dell'Orto replica)
Nominal diameter: 19.5 mm · Manufacturer: GPO · Total length: 71.5 mm · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: PHBG AS · Color: black · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Area of application: Tuning · Ø without reducing sleeve: 26 mm · Ø Internal connection: 24 mm · Width: 71 mm · Height: 123 mm · Ø Air filter connection: 32 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Mounting type: Plug connection clamped · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 55 · Nozzle thread: M5x0.8 (standard thread) · Nozzle block: 262AU · Camouflaged: No · Nozzle size: 85 · Size of secondary nozzle: 50
CHF 79.90
Collection only possible with online purchase and appointment.
