Cylinder cover with large, flat sealing surface of the Malossi brand for 44 - 47 mm racing cylinders.
Thanks to the special design, the head fits all Piaggio mopeds / mopeds. The deco cable can be attached to the Piaggio Si as with the original head.
Thanks to the extra cooling fins on the sides, this racing cylinder head can dissipate the heat generated even better and thus protects your racing kit from overheating and piston jamming.
Note: The deco pin must be hammered into the valve seat before initial installation. To do this, place the cylinder head on a stable surface with the valve ribs facing downwards and insert the pin. The deco pin must then be brought into the correct fit using a medium-strength punch and a slotted screwdriver or punch (Ø 4-6 mm). This method is unusual, but recommended by Malossi.
The remaining parts required to complete the valve must be taken from the original valve.
You will find a suitable long-threaded spark plug, complete racing nipples and other add-on parts in the accessories section.
Quality product from the Italian manufacturer Malossi.
| Manufacturer | Malossi |
| Material | Aluminum |
| Surface | sandblasted |
| Ø cylinder | 44 - 47 mm |
| Total length | 122 mm |
| Width | 87 mm |
| Height | 60 mm |
| Number of fixing points | 3 pcs |
| Area of application | Racing |
| Candle thread | long |
| Hole pattern [mm] | 35 x 55 |
| Decompressor | Yes |
| Camouflaged | No |
| Piaggio | Ciao - P , SC , PX , C24 Bravo / Super Bravo Boxer |
Accessories & related products
Malossi 46.5 mm cylinder kit without head 12 mm KoBo | Piaggio Ciao, SI, Bravo, Boxer
Nominal diameter: 46.5 mm · Manufacturer: Malossi · Camouflaged: No · Material: Gray cast iron · Displacement: 73 ccm · Crankshaft stroke: 43 mm · Surface: sandblasted · Ø cylinder neck: 50 mm · Ø Outlet outside: 22.4 mm · Ø outlet inside: 18.1 mm · Hole pattern [mm]: 55 x 34 · Ø piston pin (B): 12 mm · Outlet type: clamped · Decompressor: Yes · Number of fixing points: 3 pcs · Area of application: Tuning
CHF 144.90
Malossi 46.5 mm cylinder kit incl. head 10 mm KoBo | Piaggio Ciao, SI, Bravo, Boxer
Material: Gray cast iron · Manufacturer: Malossi · Surface: sandblasted · Nominal diameter: 46.5 mm · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 10 mm · Outlet type: clamped · Number of fixing points: 3 pcs · Decompressor: Yes · Camouflaged: No · Area of application: Tuning
CHF 169.90
NGK B7ES spark plug long thread
Manufacturer: NGK · Candle designation: B7ES · Candle thread type: long · Spark plug socket: M4 · Thread type: MF14x1.25 (fine pitch thread) · Spark plug socket: SAE · Suppressed: No · Width across flats: 21 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning
CHF 6.50
swiing® revival nut set M7 cylinder head | Piaggio Ciao, SI, Bravo, Boxer
Material: Steel · Surface: galvanized (blue) · Manufacturer: swiing® revival parts · Thread type: M7x1 (standard thread) · Nominal diameter (thread): 7 mm · Drive: External hexagon · Screw head: Hexagon · Shank: No · Number of components: 6 pcs · Width across flats: 11 mm
CHF 3.90
Explore categories from Cylinder
Moped fans also bought
Malossi 46.5 mm cylinder kit without head 10 mm KoBo | Piaggio Ciao, SI, Bravo, Boxer
Material: Gray cast iron · Manufacturer: Malossi · Surface: sandblasted · Nominal diameter: 46.5 mm · Displacement: 73 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 50 mm · Ø Outlet outside: 22.4 mm · Ø outlet inside: 18.1 mm · Ø piston pin (B): 10 mm · Outlet type: clamped · Number of fixing points: 3 pcs · Hole pattern [mm]: 55 x 34 · Decompressor: Yes · Camouflaged: No · Area of application: Tuning
CHF 144.90
Malossi 46.5 mm cylinder kit without head 12 mm KoBo | Piaggio Ciao, SI, Bravo, Boxer
Nominal diameter: 46.5 mm · Manufacturer: Malossi · Camouflaged: No · Material: Gray cast iron · Displacement: 73 ccm · Crankshaft stroke: 43 mm · Surface: sandblasted · Ø cylinder neck: 50 mm · Ø Outlet outside: 22.4 mm · Ø outlet inside: 18.1 mm · Hole pattern [mm]: 55 x 34 · Ø piston pin (B): 12 mm · Outlet type: clamped · Decompressor: Yes · Number of fixing points: 3 pcs · Area of application: Tuning
CHF 144.90
Polini Speed Engine engine housing electronic ignition | Piaggio Ciao, SI, Bravo, Boxer
Width: 175 mm · Manufacturer: Polini · Material: Aluminum · Surface: sandblasted · Color: silver · Stock number: 6202 · Crankshaft stroke: 43 mm · Ignition type: Electronic · Height: 104 mm · Total length: 215 mm
CHF 209.90
Malossi 46.5 mm cylinder kit incl. head 10 mm KoBo | Piaggio Ciao, SI, Bravo, Boxer
Material: Gray cast iron · Manufacturer: Malossi · Surface: sandblasted · Nominal diameter: 46.5 mm · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 10 mm · Outlet type: clamped · Number of fixing points: 3 pcs · Decompressor: Yes · Camouflaged: No · Area of application: Tuning
CHF 169.90
Malossi 46.5 mm cylinder kit incl. head 12 mm KoBo | Piaggio Ciao, SI, Bravo, Boxer
Nominal diameter: 46.5 mm · Manufacturer: Malossi · Material: Gray cast iron · Surface: sandblasted · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 3 pcs · Decompressor: Yes · Camouflaged: No · Area of application: Tuning
CHF 179.90
swiing® revival stud bolt set M7x120 mm cylinder | Piaggio Ciao, SI, Bravo, Boxer
Material: Steel · Surface: galvanized (blue) · Manufacturer: swiing® revival parts · Diameter: 6.2 mm · Thread type: M7x1 (standard thread) · Nominal diameter (thread): 7 mm · Drive: External hexagon · Total length: 120 mm · Strength class: 8 · Strength class: 8.8 · Width across flats: 11 mm · Thread length: 25 mm
CHF 11.70
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
