
Gasket for the intake manifold of the Puch X30 Velux engine.
Hole spacing: 32 mm
Ø inside: 14.5 mm
Thickness: 0.45 mm
This flange gasket is made of oil paper and is of the highest quality.
| Material | Oiled paper |
| Place of use | Admission |
| Thickness | 0.45 mm |
| Ø outlet inside | 14.5 mm |
| Hole spacing inlet | 32 mm |
| Puch | Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
Accessories & related products
GPO gasket set 38 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Area of application: Standard · Ø outlet inside: 22 mm · Ø cylinder: 38 mm · Number of components: 4 pcs · Hole spacing inlet: 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes
CHF 8.90
GPO gasket set 40 - 41 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Area of application: Tuning · Ø outlet inside: 22 mm · Ø cylinder: 40 mm · Ø cylinder: 41 mm · Number of components: 4 pcs · Hole spacing inlet: 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes
CHF 8.90
Moped fans also bought
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C · Area of application: Gearbox lubrication with clutch
CHF 9.90
CHF 22.00/l
BOSCH Breaker with cable | Bosch / Ducati
Manufacturer: BOSCH · Area of application: Original · Area of application: Standard · Material: Steel · Cable available: Yes · Cable length: 100 mm · Ø Internal flywheel: 90 mm · Ø axle: 4 mm · Number of fixing points: 1 pcs · Ø mounting hole: 4.5 mm · Alternative version of the Pony OEM number: A4606 · Alternative version of the Pony OEM number: A4606A · Pony OEM number: A4607 · Sachs OEM no.: 0283 116 102 · Alternative version of the Sachs OEM number: 0983 106 000 · Alternative version of the Sachs OEM number: 2783 039 001 · BERU OEM number: 0 340 100 710 · BOSCH OEM number: 1 217 013 025
CHF 19.90
Oil seal NBR 17/35/7 AS crankshaft | Puch X30
Surface: rubberized · Temperature resistance (min.): -30 - 100 °C · Shaft seal type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Manufacturer: Puch · Material: NBR · Width: 7 mm · Ø inside: 17 mm · Ø outside: 35 mm · Place of use: Crankshaft
CHF 7.90
Continental 2.00 - 2.50 x 19" tube
Manufacturer: Continental · Tire width: 2 - 2.5 " · Tire width: 2.25 - 2.5 " · Tire width: 2.5 " · Tire width [mm]: 25.8 - 63.5 · Width: 2 " · Width: 2 1/4 " · Width: 2 1/2 " · Wheel size: 19 " · Tire height [%]: 100 · Old designation: 23 x 2 " · Old designation: 23 x 2.25 " · Old designation: 23 x 2.5 " · Valve type: TR6 car valve
CHF 15.50






