Gearwheel of the primary drive for 2-speed manual Z50 engines of Puch X30 NS, NL mopeds / mopeds.
This drive wheel is used in combination with clutch pistons, which have 19 teeth.
Number of teeth: 69
Toothing: helical
Mounting: 3-prong profile
Note: There may be a slight singing after installation until the tooth flanks are ground in cleanly on the clutch basket.
The fastening nut and other parts can be found under accessories.
Original Puch spare part number: 349.3.13.200.1
| Manufacturer | HS-Retro |
| Material | Steel |
| Toothing type | helical toothed |
| Ø outside | 95 mm |
| Number of teeth | 69 pcs |
| Ø inside | 12.5 mm |
| Recording type | 3-tooth splined shaft holder |
| Puch OEM number | 349.3.13.200.1 |
| Puch | Z50 (X30 Sport) |
Ratings
Accessories & related products
HS-Retro bearing ring 24/32/7.5 large Z50 (1A quality) | Puch X30 NS, NL
Manufacturer: HS-Retro · Material: Steel · Surface: hardened & ground · Ø outside: 31.98 mm · Ø inside: 23.8 mm · Width: 7.55 mm · Area of application: High End · Area of application: Original · Puch OEM number: 329.1.13.065.1
CHF 58.90
HS-Retro bearing race 19.4/28.1/7.5 small Z50 (1A quality) | Puch X30 NS, NL
Manufacturer: HS-Retro · Material: Steel · Surface: hardened & ground · Ø outside: 28.1 mm · Ø inside: 19.44 mm · Width: 7.5 mm · Area of application: High End · Area of application: Original · Puch OEM number: 329.1.13.010.1
CHF 44.90
HS-Retro clutch basket 19 teeth 2-plate version | Puch Z50
Ø inside: 17 mm · Ø outside: 74.8 mm · Manufacturer: HS-Retro · Height: 26.6 mm · Material: Steel · Toothing type: helical toothed · Number of teeth: 19 pcs · Area of application: High End · Area of application: Original · Puch OEM number: 350.1.12.002.2
CHF 159.90
Moped fans also bought
Inox
Hot 
GPO license plate holder Inox (CH version)
Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Total length: 145 mm · Height: 5.3 mm · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm · Manufacturer: GPO · Width: 105 mm · Mounting type: Nuts & bolts · Thread length: 8 mm · Thread type: M5x0.8 (standard thread) · Hole spacing: 30 mm · Hole spacing: 50 mm
CHF 10.90
Not in stock
Airsal 46 mm cylinder kit straight exhaust | Puch
Nominal diameter: 46 mm · Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Crankshaft stroke: 43 mm · Thread inlet: M6x1 (standard thread) · Area of application: Tuning · Hole spacing inlet: 38 mm · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Camouflaged: No
CHF 199.90
Surflex clutch plate set | Puch Z50
Manufacturer: Surflex · Material: Composite materials · Material: Steel · Ø inside: 46.3 mm · Ø inside: 51.3 mm · Thickness: 2.75 mm · Ø outside: 69.6 mm · Ø outside: 74.8 mm · Recording type: Interlocking · Number of slats: 2 pcs · Area of application: Original
CHF 34.90
swiing® ingenious clutch spring reinforced +40% | Puch Z50
Spring design: Pressure spring · Ø wire: 4.5 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Color: red · Ø outside: 39 mm · Ø inside: 30 mm · Total length: 23.5 mm · Number of components: 1 pcs · Area of application: Tuning
CHF 23.90
HS-Retro clutch basket 19 teeth 2-plate version | Puch Z50
Ø inside: 17 mm · Ø outside: 74.8 mm · Manufacturer: HS-Retro · Height: 26.6 mm · Material: Steel · Toothing type: helical toothed · Number of teeth: 19 pcs · Area of application: High End · Area of application: Original · Puch OEM number: 350.1.12.002.2
CHF 159.90
Collection only possible with online purchase and appointment.
