The use of wear-free HeliCoil thread inserts not only repairs the thread but also increases the thread load-bearing capacity.
Application:
1. Drill out the defective thread with the enclosed drill
2. Check the tap and threaded bolt.
3. Cut the holding thread with the special HeliCoil tap.
4. Turn the thread insert into the holding thread.
5. Remove the tang with the tang breaker.
Full instructions are included.
For thread sizes M5, M6, M8, M10 and M12.
Scope of delivery for each thread size:
1 spiral drill
1 tap. Thread tap
1 pc. Installation tool
1 pc. Tang breaker
20 or 10 pcs. HeliCoil thread insert (1d)
20 or 10 pcs. HeliCoil thread insert (1.5d)
20 or 10 pcs. HeliCoil threaded insert (2d)
Original HeliCoil product from the German manufacturer Böllhoff.
| Storage method | Suitcase |
| Manufacturer | HeliCoil |
| Material | Chrome steel (colloquially known as stainless steel) |
| Area of application | Workshop accessories |
| Dimension thread insert | 1D, 1.5D, 2D |
| Nominal diameter (thread) | 5 mm, 6 mm, 8 mm, 10 mm, 12 mm |
| Number of components | 300 pcs |
| Storage box dimension [mm] | 420 x 345 x 120 mm |
| Thread type | M5x0.8 (standard thread), M6x1 (standard thread), M8x1.25 (standard thread), M10x1.5 (standard thread), M12x1.75 (standard thread) |
Ratings
Explore categories from Screws & fastener sets
Moped fans also bought
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Surface: blank / oiled · Ø Pin: 4 mm · Manufacturer: ESJOT · Material: Steel · Number of chain links: 114 pcs · Rolling circumference: 1448 mm · Chain lock type: Spring lock · Ø bore: 4.05 mm · Color: gray
CHF 18.90
swiing® revival nozzle set M3.5 (76 - 86) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Total length: 6 mm · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 76 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 84 · Nozzle size: 86
CHF 15.90
GPO bearing puller set inside
Span: 8 mm · Span: 25 mm · Manufacturer: GPO · Clamping depth: 10 mm · Clamping depth: 20 mm · Width across flats Screw: 14 mm · Material: Steel · Number of components: 11 pcs · Surface: burnished · Total length: 140 mm · Area of application: (Dis)assembly tool
CHF 169.90
Buzzetti wheel bearing removal tool
Width across flats Screw: 21 mm · Span: 12 mm · Span: 38 mm · Manufacturer: Buzzetti · Clamping depth: 10 mm · Pull-off depth inside: 20 mm · Total length: 210 mm · Area of application: (Dis)assembly tool · Material: Steel · Surface: burnished · Number of components: 1 pcs
CHF 62.90
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
