Grip set made from a soft, gray rubber compound.
The Piaggio logo is embedded on both grips.
The grip set consists of two grips with an inner diameter of 22 mm. It therefore requires some effort to get the grip over the throttle grip.
However, the material is quite soft and stretchy.
Length of the grip pull (measured from the inside): 13.4 cm
A quality product made in Italy.
Details
Manufacturer | Made in Italy |
Material | Rubber |
Ø inside | 22 mm |
Total length | 134 mm |
Color | gray, white |
Suitable for the following models
Universal | |
Piaggio |
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm
CHF 2.80
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Cable length: 2200 mm
CHF 2.40
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
CHF 9.90
CHF 22.00/l
GPO 85° carburetor pipe bend brass M6x0.75
Total length: 45.5 mm · Total length: 53.5 mm · Height: 30 mm · Manufacturer: GPO · Width across flats nut: 8 mm · Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Internal thread: MF6x0.75 (fine pitch thread) · Angle: 85 ° · Thread type: MF6x0.75 (fine pitch thread) · Ø outside: 6 mm · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
CHF 5.90