Black, adjustable dampers with fancy red coil springs for your moped, moped and small motorcycle.
The hardness or preload of the dampers can be adjusted using the special spring mount.
Length (mount - mount): 300 mm
Outer diameter of coil spring: 50 mm
Holt diameter: 30 mm
Bush diameter to mount: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
| Manufacturer | GPO |
| Surface | varnished |
| Color | red, black |
| Damping type | Spring |
| Adjustable | Yes |
| Ø spars | 30 mm |
| Total length | 330 mm |
| Mounting type | Nuts & bolts |
| Ø outside | 50 mm |
| Number of fixing points | 2 pcs |
| Ø Fastening inside | 10 mm |
| Hole spacing | 300 mm |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Area of application: Chemistry · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
CHF 21.90
CHF 2’190.00/l
YSS shock absorber Racing 30 cm (oil pressure)
Manufacturer: YSS · Color: black · Surface: varnished · Damping type: Hydraulic (oil) · Material: Steel · Adjustable: Yes · Ø spars: 32 mm · Total length: 335 mm · Ø Fastening inside: 10 mm · Ø outside: 52 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Hole spacing: 330 mm
CHF 129.90
swiing® revival screw set shock absorber mounting with axle galvanized | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M8x1.25 (standard thread) · Nominal diameter (thread): 8 mm · Drive: External hexagon · Screw head: Hexagon · Number of components: 17 pcs
CHF 11.90
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Number of components: 17 pcs · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Nominal diameter (thread): 8 mm · Drive: External hexagon · Screw head: Hexagon · Thread type: M8x1.25 (standard thread)
CHF 17.90
MKX shock absorber 30 cm chrome
Manufacturer: MKX · Surface: chrome-plated · Damping type: Spring · Adjustable: Yes · Ø spars: 24 mm · Total length: 335 mm · Number of fixing points: 2 pcs · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Hole spacing: 300 mm · Material: Aluminum · Material: Steel · Color: Chrome · Ø outside: 46 mm · Mounting type: Nuts & bolts
CHF 49.90
Explore categories from Shock absorber & swingarm
Moped fans also bought
Inox
Hot 
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Total length: 145 mm · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm · Width: 105 mm · Thread type: M5x0.8 (standard thread) · Height: 5.3 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Thread length: 8 mm · Mounting type: Nuts & bolts
CHF 10.90
Working late? Evening hours on Thursday until 20:00
