White 10–30 V LED bulb, compatible with various headlights featuring a corresponding 1-pin P26s socket.
Among other applications, this bulb can be installed in the headlights of Piaggio Ciao, Si, Bravo, and Boxer models, as well as some Puch mopeds.
Thanks to its voltage range of 10 to 24 volts, the LED bulb can be operated without any problems with electronic 12-volt ignition systems.
Due to its extra-short design, the LED bulb fits into any headlight without touching the front lens. In total, the LED bulb is equipped with 20 diodes, with four facing forward and the remaining 16 oriented to the sides.
The power output is 4.8 LED watts, which, according to a rule-of-thumb conversion, corresponds to approximately 30 incandescent watts. The manufacturer specifies the color temperature as 6000 K (Kelvin) and the brightness as 800 Lm (lumens).
Note: Despite the LED bulb’s maximum voltage of 30 volts, installing a 12-volt voltage regulator is essential for electronic ignition systems, as higher voltage spikes may occur depending on the ignition system.
You can find the appropriate voltage regulator, along with other bulbs and filaments, in the accessories section.
A good, affordable standard replacement part. GPO – GOOD PARTS ONLY.
| Manufacturer | GPO |
| Test mark | none |
| Bulb holder | P26s |
| Tension | 10 V, 12 V, 24 V, 30 V |
| Color | white |
| Ø base | 26 mm |
| Total length | 35 mm |
| Ø Lamp head | 15 mm |
| LED | Yes |
| Universal | |
| Piaggio | Ciao - P , SC , PX , C24 Si Bravo / Super Bravo Boxer Grillo |
Accessories & related products
12V LED set (P26s) with Leonelli voltage regulator | Puch
Manufacturer: Leonelli · Test mark: none · Bulb holder: BA9s · Bulb holder: P26s · Tension: 6 V · Color: red · Color: white · Ø base: 9 mm · Ø base: 26 mm · Total length: 22 mm · Total length: 35 mm · Ø Lamp head: 9.5 mm · Ø Lamp head: 15 mm · LED: Yes
CHF 52.90
Explore categories from Electrics & light
Moped fans also bought
12V LED set (P26s) with Leonelli voltage regulator | Puch
Manufacturer: Leonelli · Test mark: none · Bulb holder: BA9s · Bulb holder: P26s · Tension: 6 V · Color: red · Color: white · Ø base: 9 mm · Ø base: 26 mm · Total length: 22 mm · Total length: 35 mm · Ø Lamp head: 9.5 mm · Ø Lamp head: 15 mm · LED: Yes
CHF 52.90
12V LED set with Leonelli voltage regulator | Piaggio Ciao, SI, Bravo, Boxer
Total length: 22 mm · Total length: 27 mm · Total length: 35 mm · Manufacturer: Leonelli · Test mark: none · Color: white · Bulb holder: BA9s · Bulb holder: E10 · Bulb holder: P26s · Tension: 12 V · Ø base: 9 mm · Ø base: 9.5 mm · Ø base: 26 mm · Ø Lamp head: 9.5 mm · Ø Lamp head: 15 mm · LED: Yes
CHF 59.90
GPO 12V LED set with GPO voltage regulator | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Test mark: none · Bulb holder: BA9s · Bulb holder: E10 · Bulb holder: P26s · Color: white · Tension: 12 V · Ø base: 9 mm · Ø base: 9.5 mm · Ø base: 26 mm · Total length: 22 mm · Total length: 27 mm · Total length: 35 mm · Ø Lamp head: 9.5 mm · Ø Lamp head: 15 mm · LED: Yes
CHF 54.90
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
