High-quality replica tie rod for Zündungen with small Bosch flywheel, which were installed on Zündapp ZD 10, ZD 30, ZR 10, ZR 20, ZR 30, ZA 25 and ZA 40 mopeds, among others.
Hole spacing (center - center): 46.5 mm
Hole diameter: 4.6 mm
For flywheels with an inner diameter of 80 mm
Original Zündapp spare part number: 249-07.908
Original BOSCH spare part number: 2 204 211 052
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
| Manufacturer | GPO |
| Ø cable holder | 6.1 mm |
| Ø mounting hole | 4.6 mm |
| Color | black |
| Height | 11 mm |
| Ø Internal flywheel | 80 mm |
| Cable length | 68 mm |
| Hole spacing | 46.5 mm |
| Place of use | Internal (in the ignition) |
| Mounting type | Screws |
| Number of fixing points | 2 pcs |
| Total length | 69.7 mm |
| Area of application | Standard, Original |
Suitable for the following models
| Zündapp |
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Ø cable: 5 mm · Ø cable: 7 mm · Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Component group Carburetor: Spraying · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
CHF 8.75
Fortune / Merrick 2.00-2.50 x 16/17" inner tube
Manufacturer: Fortune · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Wheel size [inch]: 16 - 17 " · Wheel size [inch]: 17 " · Tire height [%]: 100 · Old designation: 20 x 2 · Old designation: 20 x 2.25 · Old designation: 20 x 2.5 · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5 · Valve type: TR4 Auto valve
CHF 9.90
BERU breaker with cable (small) | Bosch / Ducati / Minarelli
Manufacturer: BERU · Material: Steel · Ø axle: 4 mm · Ø mounting hole: 4.5 mm · Cable available: Yes · Number of fixing points: 1 pcs · Area of application: Original · Area of application: Standard · Ø Internal flywheel: 80 mm · Morini OEM number: 29 0026 005 · Morini OEM number: 29 0034 005 · Pony OEM number: A2496 · Minarelli OEM number: 82 000 16 · BOSCH OEM number: 2 207 013 005 · BOSCH OEM number: 2 207 110 007 · BERU OEM number: 0 340 100 458 · Fantic OEM number: 320 4500 5150
CHF 18.90
swiing condenser for screwing | Bosch / Ducati
Manufacturer: swiing · Capacity: 0.16 µF · Mounting type: Plug connection clamped · Height: 23 mm · Connection type: Thread for screwing · Area of application: Original · Area of application: Standard · Thread type: M3x0.5 (standard thread) · Ø outside: 18 mm · BOSCH OEM number: 2 207 330 050
CHF 9.90
Hot 
swiing 15 mm carburetor tuning camouflaged | Puch
Total length: 66 mm · Manufacturer: swiing · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Width: 50 mm · Choke control: Hand choke · Height: 95 mm · Nominal diameter: 15 mm · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Area of application: Tuning · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
CHF 79.90
Ignition cable Ø 5 x 450 mm (1A quality)
Ø cable: 5 mm · Total length: 450 mm · Manufacturer: Made in Germany · Material: Copper · Material: Plastic · Suppressed: No · Color: black · Component group Carburetor: Carburetor complete · Pony OEM number: A4603 · Sachs OEM no.: 0965 133 001
CHF 3.40
CHF 7.56/m
Collection only possible with online purchase and appointment.
