
Slotted Ø 90x18 mm brake pads with return spring for various brake pedals on your moped, moped and small motorcycle.
Slotted brake pads enable improved heat and brake dust dissipation, resulting in an increased braking effect. This improved braking power is suitable for daily use, especially with slightly increased performance.
The pad compound corresponds to the AKOA alternative sold on the market. The quality is okay and the brakes fulfill their purpose, but do not reach the level of the swiing® brake pads in terms of braking performance and durability.
Alternative brake pads with an even higher quality pad compound for racing, suitable springs and appropriate cleaning agents and lubricants can be found in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Slotted | Yes |
| Manufacturer | GPO |
| Ø drum | 90 mm |
| Springs included | Yes |
| Number of springs | 1 pcs |
| Width | 18 mm |
| Area of application | Tuning |
| Puch |
| Sachs |
| Zündapp Belmondo |
| Cilo |
Accessories & related products
Eurol copper grease 100 g
Temperature resistance (min.): -40 - 1100 °C · Manufacturer: Eurol · Area of application: Chemistry · Area of application: Fat · Contents: 100 g · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Hazard warning: Very toxic to aquatic organisms · Signal word: Danger · Hazard pictogram: GHS09 - Hazardous to the aquatic environment
CHF 11.90
CHF 119.00/kg
Motorex Brake Cleaner 750 ml
Manufacturer: Motorex · Contents: 750 ml · Area of application: Chemistry · Area of application: Cleaner · Hazard warning: Causes serious eye irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS04 - Gas under pressure · Hazard pictogram: GHS07 - Caution dangerous
CHF 24.90
CHF 33.20/l
swiing® ingenious assembly tool clasp brake shoe
Ø outside: 10 mm · Total length: 41.1 - 65 mm · Manufacturer: swiing® ingenious parts · Number of components: 3 pcs · Material: Steel · Surface: galvanized (blue) · Area of application: Special tool · Thread type: M6x1 (standard thread) · Width across flats: 8 mm · Thread length: 30 mm
CHF 16.50
Explore categories from Drum brake
Moped fans also bought
swiing® revival wheel bearing 25/37/6.3 coaster wheel
Stock number: K042 · Inner ring width: 25 mm · Ball bearing closed: No · Manufacturer: swiing® revival parts · Bearing cage: Sheet steel cage ball-guided · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Bearing type: Ball ring · Ø inside: 25 mm · Ø outside: 36 mm · Width: 6.8 mm · Area of application: Standard
CHF 7.90
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift
CHF 10.90
CHF 24.22/l
Union pedals plastic standard
Color: black · Manufacturer: Union · Total length: 129 mm · Width: 77 mm · Height: 29 mm · Material: Plastic · Material: Steel · Drive: Hexagon socket · Drive: Outer edge · Surface: rubberized · Thread type: FG14.3 (9/16" 20G) · Width across flats: 15 mm · Reflectors: Yes
CHF 12.90
swiing® revival ball bearing 25.5/6.3 coaster brake driver
Ball bearing closed: No · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Bearing cage: Sheet steel cage ball-guided · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Bearing type: Ball ring · Ø outside: 25.5 mm · Puch OEM number: 900.6909 · Sachs OEM no.: F 4762
CHF 6.90
Not in stock
Manual indoor cable set
Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.2 mm · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Total length: 2200 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
CHF 9.90
swiing® ingenious assembly tool clasp brake shoe
Ø outside: 10 mm · Total length: 41.1 - 65 mm · Manufacturer: swiing® ingenious parts · Number of components: 3 pcs · Material: Steel · Surface: galvanized (blue) · Area of application: Special tool · Thread type: M6x1 (standard thread) · Width across flats: 8 mm · Thread length: 30 mm
CHF 16.50








