Racing kit with 44 mm diameter for your Tomos moped / moped with A35 engine.
This 65 cc racing cylinder made of aluminum with nickel-silicon carbide coating (colloquially known as Nikasil) impresses with its good workmanship and long service life.
In order to get the full power out of the tuning cylinder, a racing exhaust and a carburetor with plenty of oomph should be fitted.
All necessary gaskets, piston pins, piston rings and circlips are included in the scope of delivery.
Note: Please observe the installation direction when assembling. The piston is inserted with the arrow pointing towards the outlet on the exhaust side.
You can find the necessary racing equipment and other engine kits in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Manufacturer | GPO |
| Material | Aluminum |
| Camouflaged | No |
| Area of application | Tuning |
| Surface | sandblasted |
| Displacement | 65 ccm |
| Nominal diameter | 44 mm |
| Crankshaft stroke | 43 mm |
| Ø piston pin (B) | 12 mm |
| Ø cylinder neck | 47.8 mm |
| Number of fixing points | 4 pcs |
| Inlet window | 35.5 x 29.5 mm |
| Ø outlet inside | 22.8 mm |
| Thread inlet | M5x0.8 (standard thread) |
| Hole spacing outlet | 42 mm |
| Decompressor | No |
| Hole pattern [mm] | 44 x 44 |
| Hole spacing inlet | 36 mm, 39 mm |
| Outlet type | slanted |
| Thread outlet | M6x1 (standard thread) |
| Tomos |
Accessories & related products
GPO piston 44 mm (12 mm KoBo) | Tomos A3/A35
Manufacturer: GPO · Ø outside piston (A): 43.96 mm · Compression height (C): 21.9 mm · Curvature (D): 4.15 mm · Total piston height (E): 49.55 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 44 mm · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Ø piston pin (B): 12 mm
CHF 37.90
Explore categories from Cylinder
Moped fans also bought
- 16 %
Hot 
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.95 mm · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Thread length: 12 mm · Total length: 30 mm · Strength class: 10.9
CHF 1.80
CHF 1.50
Dell'Orto 15/15 SHA carburetor hand choke (with air filter)
Nominal diameter: 15 mm · Manufacturer: Dell'Orto · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SHA · Total length: 82 mm · Ø without reducing sleeve: 21 mm · Nozzle size: 68 · Ø Inside entrance: 15 mm · Width: 70 mm · Ø Output inside: 15 mm · Height: 100 mm · Ø Air filter connection: 59 mm · Ø Internal connection: 18 mm · Color: black · Ø fuel hose connection: 5.3 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Mounting type: Plug connection clamped · Choke control: Hand choke · Area of application: Racing · Area of application: Tuning · Nozzle thread: M5x0.8 (standard thread)
CHF 69.90
DMP 44 mm cylinder head (higher compression) | Tomos
Manufacturer: DMP · Material: Aluminum · Surface: glass bead blasted · Ø cylinder: 44 mm · Width: 145 mm · Height: 66 mm · Total length: 145 mm · Ø screw holder: 8 mm · Candle thread: short · Hole pattern [mm]: 44 x 44 · Area of application: Racing · Area of application: Tuning · Number of fixing points: 4 pcs
CHF 59.90
Working late? Evening hours on Thursday until 20:00
