All wishlists Community wishlists
Carousel Image 1
Carousel Image 2
Carousel Image 3
Carousel Image 4
logo_gpo

Universal

27250

GPO 17.5 mm PHBG AD carburetor cable choke (Dell'Orto replica)

rating iconrating iconrating iconrating iconrating icon
No reviews
CHF 79.90

Incl. 8.1% VAT.

Description

17.5 mm PHBG replica racing carburetor for universal use for your moped, moped and small motorcycle.
This racing carburetor is suitable for tuning and is designed for racing bikes between 50 and 70 cc.

The tuning carburetor has a cable-operated choke (starter slide / starter flap).
The fuel/air mixture can be perfectly adjusted using the main and secondary air flow as well as the mixture adjustment screw.

The carburetor has an M32x1.25 thread on the air filter side. The air filter can be attached directly to the thread.

Main thread size (M5): 80 (with throttle plate)
Adjacent thread size (idle thread): 50
Choked thread size: 55
Air filter connection diameter: 32 mm (M32 x 1.25)
Connection diameter of intake manifold: 24 mm (or 26 mm after removing the reducer sleeve)
Total height: 130 mm
Total width: 75 mm

Matching nozzles, air filters and intake manifolds can be found in the accessories section.

Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.

Width75 mm
ManufacturerGPO
Mounting typePlug connection clamped
Component group CarburetorCarburetor complete
Nominal diameter17.5 mm
Carburetor typePHBG AD
Height130 mm
Ø without reducing sleeve26 mm
Area of applicationTuning
Ø Internal connection24 mm
Ø Air filter connection32 mm
Air filter connection threadMF32x1.25 (fine pitch thread)
Ø fuel hose connection6 mm
Mixed oil connectionYes
Choke controlCable choke
Choke nozzle size55
Nozzle threadM5x0.8 (standard thread)
Nozzle size80
Size of secondary nozzle50

Accessories & related products

Dell'Orto gasket set carburetor PHBG
undefined

Universal

10493

Dell'Orto gasket set carburetor PHBG

Manufacturer: Dell'Orto · Component group Carburetor: Sealing, revising · Carburetor type: PHBG

CHF 11.90

GPO 18.5 mm intake manifold Dell'Orto PHBG | Puch E50
undefined

For: Puch

10659

GPO 18.5 mm intake manifold Dell'Orto PHBG | Puch E50

Ø inside: 18.8 mm · Manufacturer: GPO · Area of application: Tuning · Color: Chrome · Material: Aluminum · Surface: polished · Ø External connection: 23.9 mm · Mounting type: Screws · Hole spacing inlet: 38 mm · Total height: 57 mm · Height flange center hole: 45 mm · Total length: 40 mm · Number of fixing points: 2 pcs · Camouflaged: No

CHF 17.90

Gas cable Ø 1.2 mm x 165 cm (nipple ball) Dell'Orto
undefined

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Piaggio · Tomos · Cilo · Hercules

10703

Gas cable Ø 1.2 mm x 165 cm (nipple ball) Dell'Orto

Ø nipple: 3.5 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.2 mm · Cable length: 1650 mm · Nipple shape: Ball · Area of application: Standard

CHF 2.40

swiing® revival nozzle set M5 (70 - 92) Dell'Orto SHA, PHBG
undefined

For: Universal · Pony / Cilo (Beta 521 & 512) · Piaggio

10902

swiing® revival nozzle set M5 (70 - 92) Dell'Orto SHA, PHBG

Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Drive: Slot · Total length: 8 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 75 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92

CHF 20.90

Hot Hot
swiing® revival nozzle set M5 (50 - 70) Dell'Orto SHA, PHBG
undefined

For: Universal · Pony / Cilo (Beta 521 & 512) · Piaggio

12179

swiing® revival nozzle set M5 (50 - 70) Dell'Orto SHA, PHBG

Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Drive: Slot · Total length: 8 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70

CHF 20.90

Not in stock

swiing® revival nozzle set M5 (80 - 100) Dell'Orto SHA, PHBG
undefined

For: Universal · Pony / Cilo (Beta 521 & 512) · Piaggio

17985

swiing® revival nozzle set M5 (80 - 100) Dell'Orto SHA, PHBG

Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Total length: 8 mm · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98 · Nozzle size: 100

CHF 20.90

Not in stock

swiing® revival nozzle M5 (30 - 120 of your choice) Dell'Orto SHA, PHBG
undefined
angle-right

For: Universal · Pony / Cilo (Beta 521 & 512) · Piaggio · Tomos

22000

swiing® revival nozzle M5 (30 - 120 of your choice) Dell'Orto SHA, PHBG

Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Drive: Slot · Total length: 8 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 30 · Nozzle size: 31 · Nozzle size: 32 · Nozzle size: 33 · Nozzle size: 34 · Nozzle size: 35 · Nozzle size: 36 · Nozzle size: 37 · Nozzle size: 38 · Nozzle size: 39 · Nozzle size: 40 · Nozzle size: 41 · Nozzle size: 42 · Nozzle size: 43 · Nozzle size: 44 · Nozzle size: 45 · Nozzle size: 46 · Nozzle size: 47 · Nozzle size: 48 · Nozzle size: 49 · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60 · Nozzle size: 61 · Nozzle size: 62 · Nozzle size: 63 · Nozzle size: 64 · Nozzle size: 65 · Nozzle size: 66 · Nozzle size: 67 · Nozzle size: 68 · Nozzle size: 69 · Nozzle size: 70 · Nozzle size: 71 · Nozzle size: 72 · Nozzle size: 73 · Nozzle size: 74 · Nozzle size: 75 · Nozzle size: 76 · Nozzle size: 77 · Nozzle size: 78 · Nozzle size: 79 · Nozzle size: 80 · Nozzle size: 81 · Nozzle size: 82 · Nozzle size: 83 · Nozzle size: 84 · Nozzle size: 85 · Nozzle size: 86 · Nozzle size: 87 · Nozzle size: 88 · Nozzle size: 89 · Nozzle size: 90 · Nozzle size: 91 · Nozzle size: 92 · Nozzle size: 93 · Nozzle size: 94 · Nozzle size: 95 · Nozzle size: 96 · Nozzle size: 97 · Nozzle size: 98 · Nozzle size: 99 · Nozzle size: 100 · Nozzle size: 101 · Nozzle size: 102 · Nozzle size: 103 · Nozzle size: 104 · Nozzle size: 105 · Nozzle size: 106 · Nozzle size: 107 · Nozzle size: 108 · Nozzle size: 109 · Nozzle size: 110 · Nozzle size: 111 · Nozzle size: 112 · Nozzle size: 113 · Nozzle size: 114 · Nozzle size: 115 · Nozzle size: 116 · Nozzle size: 117 · Nozzle size: 118 · Nozzle size: 119 · Nozzle size: 120

CHF 3.50

Dell'Orto choke nozzle 60 PHBG 15 - 21 mm
undefined

Universal

23762

Dell'Orto choke nozzle 60 PHBG 15 - 21 mm

Manufacturer: Dell'Orto · Material: Brass · Component group Carburetor: Spraying · Carburetor type: PHBG · Nozzle type: Choke nozzle · Drive: Slot · Nozzle size: 60

CHF 10.90

66HEROES Mushroom air filter grille 28 - 32 mm black
undefined

Universal

26152

66HEROES Mushroom air filter grille 28 - 32 mm black

Manufacturer: 66HEROES · Area of application: Tuning · Color: black · Material: Metal · Material: Rubber · Filter type: Grille · Ø outside: 60 mm · Total length: 114 mm · Ø Internal connection: 28 mm · Ø Internal connection: 32 mm · Mounting type: Plug connection clamped · Camouflaged: No

CHF 15.90

Dell'Orto secondary nozzle PHBG (size 30 - 70) of your choice
undefined
angle-right

Universal

27204

Dell'Orto secondary nozzle PHBG (size 30 - 70) of your choice

Manufacturer: Dell'Orto · Material: Brass · Component group Carburetor: Spraying · Carburetor type: PHBG · Nozzle type: Secondary nozzle · Drive: Slot · Nozzle size: 30 · Nozzle size: 35 · Nozzle size: 40 · Nozzle size: 45 · Nozzle size: 50 · Nozzle size: 55 · Nozzle size: 60 · Nozzle size: 65 · Nozzle size: 70

CHF 4.90

swiing® ingenious air filter Dell'Orto PHBG with screw thread
undefined
angle-right

Universal

35679

swiing® ingenious air filter Dell'Orto PHBG with screw thread

Manufacturer: swiing® ingenious parts · Camouflaged: No · Thread type: MF32x1.25 (fine pitch thread) · Color: graphite colors · Material: Aluminum · Total length: 25 mm · Ø outside: 58 mm · Mounting type: Thread for screwing

CHF 44.90

Explore categories from Carburetor

S-10-40-060-10_Bing
Bing / swiing®
S-10-40-060-20_DellOrto
Dell'Orto
S-10-40-060-30_Stage6
Stage6
S-10-40-060-40_Polini
Polini
S-10-40-060-50_Keihin
Keihin
S-10-40-060-60_Mikuni
Mikuni
S-10-40-060-70_Solex
Solex
S-10-40-060-75_Gurtner
Gurtner
S-10-40-060-80_Sonstige
Other

Moped fans also bought

GPO clutch 3-jaw aluminum | Puch E50
undefined

For: Puch

10060

GPO clutch 3-jaw aluminum | Puch E50

Thickness: 20.9 mm · Manufacturer: GPO · Material: Aluminum · Material: Steel · Material addition: Composite materials · Number of springs: 3 pcs · Recording type: Cone mounting · Number of jaws: 3 pcs · Ø inside: 12 mm · Ø inside: 14.6 mm · Ø outside: 93 mm · Area of application: Original · Area of application: Standard

CHF 49.90

Rectangular rear light (ULO replica) Budget

For: Universal · Puch · Sachs

10076

Rectangular rear light (ULO replica) Budget

Color: black · Color: red · Mounting type: Nuts & bolts · Material: Plastic · Test mark: none · Bulb holder: BA9s · Ø Receptacle: 3.5 mm · Depth: 55 mm · Width: 65 mm · Battery operated: No · Brake light: No · Reflectors: Yes · Number of fixing points: 1 pcs · Pony OEM number: P777 · Puch OEM number: 321.1.55.100.0

CHF 9.50

- 35 %
Stud bolt M7 x 106 (Velux)

For: Universal · Puch

10124

Stud bolt M7 x 106 (Velux)

Material: Steel · Surface: galvanized (blue) · Total length: 106 mm · Thread type: M7x1 (standard thread) · Thread length: 25 mm

CHF 2.80

CHF 1.80

Adhesive kit tank & frame black PVC carrier film | Puch Maxi S

For: Puch

10177

Adhesive kit tank & frame black PVC carrier film | Puch Maxi S

Color: black · Color: white · Material: Polyvinyl chloride (PVC) · Place of use: Frame (+ tank) · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Width: 123 mm · Width: 230 mm · Width: 330 mm · Height: 26 mm · Height: 60 mm · Height: 65 mm

CHF 9.40

Dell'Orto gasket set carburetor PHBG
undefined

Universal

10493

Dell'Orto gasket set carburetor PHBG

Manufacturer: Dell'Orto · Component group Carburetor: Sealing, revising · Carburetor type: PHBG

CHF 11.90

GPO 18.5 mm intake manifold Dell'Orto PHBG | Puch E50
undefined

For: Puch

10659

GPO 18.5 mm intake manifold Dell'Orto PHBG | Puch E50

Ø inside: 18.8 mm · Manufacturer: GPO · Area of application: Tuning · Color: Chrome · Material: Aluminum · Surface: polished · Ø External connection: 23.9 mm · Mounting type: Screws · Hole spacing inlet: 38 mm · Total height: 57 mm · Height flange center hole: 45 mm · Total length: 40 mm · Number of fixing points: 2 pcs · Camouflaged: No

CHF 17.90

swiing® revival nozzle set M5 (70 - 92) Dell'Orto SHA, PHBG
undefined

For: Universal · Pony / Cilo (Beta 521 & 512) · Piaggio

10902

swiing® revival nozzle set M5 (70 - 92) Dell'Orto SHA, PHBG

Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Drive: Slot · Total length: 8 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 75 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92

CHF 20.90

GPO mushroom air filter grille chrome 28 - 32 mm
undefined

Universal

10983

GPO mushroom air filter grille chrome 28 - 32 mm

Manufacturer: GPO · Material: Metal · Material: Rubber · Color: Chrome · Area of application: Tuning · Color: black · Ø outside: 61 mm · Filter type: Grille · Length rubber part: 65 mm · Total length: 115 mm · Mounting type: Bride · Mounting type: Plug connection clamped · Length of filter section: 50 mm · Ø Internal connection: 28 mm · Ø Internal connection: 32 mm · Camouflaged: No

CHF 12.90

Dell'Orto hand choke lever PHBG
undefined

Universal

12091

Dell'Orto hand choke lever PHBG

Manufacturer: Dell'Orto · Component group Carburetor: Choke control · Carburetor type: PHBG · Choke control: Hand choke

CHF 19.90

GPO secondary nozzle PHBG (size 30 - 62.5) of your choice
undefined
angle-right

Universal

34782

GPO secondary nozzle PHBG (size 30 - 62.5) of your choice

Manufacturer: GPO · Material: Brass · Component group Carburetor: Spraying · Carburetor type: PHBG · Carburetor type: PHBG AD · Carburetor type: PHBG AS · Carburetor type: PHBG BD · Carburetor type: PHBG CS · Carburetor type: PHBG DS · Drive: Slot · Total length: 9.5 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 30 · Nozzle size: 32 · Nozzle size: 35 · Nozzle size: 37 · Nozzle size: 38 · Nozzle size: 40 · Nozzle size: 42 · Nozzle size: 44 · Nozzle size: 45 · Nozzle size: 46 · Nozzle size: 48 · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 60 · Nozzle size: 62.5

CHF 3.50