
Heat-resistant headlight film suitable for your moped, moped or small motorcycle.
This custom tuning gives your normal headlight a beautiful yellow vintage look and turns your bead into an eye-catcher.
Size: 25 x 25 cm
The adhesive film can be cut to fit the lamp and then stuck on.
The area to be covered should be free of grease and dirt in order to provide a firm hold for the adhesive of the tuning film.
Suitable cleaning agents, cleaning cloths, etc. can be found in the accessories section.
| Material | Plastic |
| Total length | 250 mm |
| Width | 250 mm |
| Color | yellow |
Accessories & related products
GUIA square headlight (yellow glass)
Test mark: none · Manufacturer: GUIA · Area of application: Tuning · Housing material: Plastic · Switch included: No · Color: black · Color: yellow · Width: 141 mm · Height: 77 mm · Bulb holder: BA20d · Depth: 85 mm · Speedometer recording: None · Mounting type: Screws · Battery operated: No · Number of fixing points: 2 pcs
CHF 28.90
Reflector & glass yellow | Piaggio Ciao PX, C24, Boss
Test mark: none · Manufacturer: Made in Italy · Material: Plastic · Color: yellow · Width: 119 mm · Height: 85 mm · Bulb holder: P26s · Bulb holder: Soffit pear · Mounting type: Screws · Number of fixing points: 2 pcs · Hole spacing: 104 mm
CHF 24.90
Not in stock
Loctite 7063 cleaning spray 400 ml
Manufacturer: Loctite · Area of application: Cleaner · Contents: 400 ml · Hazard warning: Causes skin irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment
CHF 23.90
CHF 59.75/l
Loctite 7200 Adhesive and sealant remover 400 ml
Manufacturer: Loctite · Area of application: Chemistry · Area of application: Cleaner · Contents: 400 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous
CHF 32.50
CHF 81.25/l
Explore categories from Electrics & light
Moped fans also bought
Rear light glossy chrome - red
Ø Receptacle: 3.5 mm · Test mark: none · Material: Plastic · Width: 65 mm · Bulb holder: BA9s · Height: 45 mm · Color: Chrome · Color: red · Depth: 55 mm · Battery operated: No · Brake light: No · Reflectors: Yes · Mounting type: Nuts & bolts · Number of fixing points: 1 pcs
CHF 9.90
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Thread type: M6x1 (standard thread) · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 30 mm · Diameter: 5.95 mm · Nominal diameter (thread): 6 mm · Thread length: 12 mm · Strength class: 10.9
CHF 1.80
Bumm mirror round Inox
Thread type: M8x1.25 (standard thread) · Total length: 360 mm · Clamping diameter: 22 mm · Manufacturer: Bumm · Test mark: none · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: chrome-plated · Thread size: M8 · Ø mirror surface: 107 mm · Ø mirror rod: 8 mm · Color: Chrome · Mirror rod length: 300 mm
CHF 27.90
MKX shock absorber 26 cm black
Manufacturer: MKX · Hole spacing: 260 mm · Material: Aluminum · Material: Steel · Surface: varnished · Damping type: Spring · Adjustable: Yes · Ø outside: 46 mm · Ø spars: 24 mm · Total length: 295 mm · Color: black · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
CHF 49.90









