
Headlight assembly with LED headlight featuring ring lighting and an internal reflector for your Piaggio SI moped with a 6V or 12V electrical system.
Modern LED headlight insert to enhance the front appearance and provide significantly improved illumination while riding. Suitable for both original and modified vehicles.
Included in the package are the headlight insert, the connection board, and three cable lugs for the electrical connection.
Connect according to the following diagram:
COM – Black wire from the LED headlight
COM1 – Black ground wire from the original wiring harness
COM2 – Nothing connected
IN-1 - Purple wire from the original wiring harness
IN-2 - Brown wire from the original wiring harness
OUT-1 - Red wire from the LED headlight
OUT-2 - Yellow wire from the LED headlight
Note: The manufacturer recommends using a voltage regulator to extend the service life.
You can find the appropriate tools and additional wiring materials in the accessories section.
Brand-name product from the manufacturer EVOK.
Alternative to the original Piaggio part number: 193829
| Manufacturer | EVOK |
| Test mark | E9 |
| Tension | 6 V |
| Ø outside | 126.6 mm |
| Total length | 65 mm |
| Color | black |
| Bulb holder | LED (permanently installed) |
| Ø Lamp head | 104 mm |
| LED | Yes |
| Alternative version of the Piaggio OEM number | 193829 |
| Piaggio | Si |
Accessories & related products
Evok LED headlight insert (with LED ring) | Piaggio SI
Manufacturer: EVOK · Test mark: E9 · Bulb holder: LED (permanently installed) · Color: black · Tension: 6 V · Ø outside: 126.6 mm · Total length: 65 mm · Ø Lamp head: 104 mm · LED: Yes · Alternative version of the Piaggio OEM number: 193829
CHF 119.90
CHF 99.90
Evok LED headlight insert (without LED ring) | Piaggio SI
Total length: 65 mm · Ø outside: 126.6 mm · Manufacturer: EVOK · Test mark: E9 · Bulb holder: LED (permanently installed) · Color: black · Tension: 6 V · Ø Lamp head: 104 mm · LED: Yes · Alternative version of the Piaggio OEM number: 193829
CHF 109.90
Explore categories from Headlights & indicators
Moped fans also bought
Inner cable Ø 1.2 mm x 200 cm with barrel nipple Ø 6 mm
Ø nipple: 6 mm · Manufacturer: Made in Germany · Material: Brass · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.2 mm · Cable length: 2000 mm · Nipple shape: Barrel (transverse) · Nipple length: 5.5 mm
CHF 3.40
GPO clutch plates (2 pcs.) | Sachs 50/2, 503 2AL/2BL (A3887)
Manufacturer: GPO · Material: Composite materials · Area of application: Standard · Material: Steel · Ø inside: 29.6 mm · Ø inside: 35.6 mm · Ø outside: 93 mm · Recording type: Interlocking · Number of slats: 2 pcs · Thickness: 3.3 mm · Pony OEM number: A3887 · Sachs OEM no.: 0659 010 006
CHF 16.90
GPO ball bearing countershaft | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A2531)
Bearing type: Deep groove ball bearing · Ø inside: 15 mm · Ø outside: 35 mm · Width: 8 mm · Width: 25.6 mm · Manufacturer: GPO · Ball bearing closed: No · Bearing clearance: CN (standard) · Bearing cage: Sheet steel cage ball-guided · Thread type: MF20x1 (fine pitch thread) · Material: Steel · Area of application: Standard · Pony OEM number: A2531 · Sachs OEM no.: 0286 079 105
CHF 34.90








