profile
All wishlists Community wishlists
Carousel Image 1
logo_puch-mk

For: Puch

11572

Crescent ring clutch / decoupling shaft | Puch E50 / Z50

  • − 29% from 10 Pieces

    CHF 1.00 per pc.

CHF 1.40

Incl. 8.1% VAT.

Description
Crescent-shaped retaining ring for the clutch shaft, compatible with your Puch moped equipped with an E50 engine, as well as for the release shaft of your Puch moped equipped with a 2-speed manual Z50 engine.

This retaining ring (commonly known as a Seeger ring or Seeger-Orbis ring) is used on the clutch actuator. Depending on the engine, the retaining ring is installed on the clutch shaft of the E50 engine or on the release shaft of the Z50 engine.

Note: Retaining rings should only be used once.

You can find additional retaining rings and compatible parts for the clutch actuator in the accessories section.

ManufacturerPuch
Place of useUncoupling shaft
Fuse typeInside
Puch

E50

Z50 (X30 Sport)

Z50 (X30 Velux)

2-speed MS, MV, MV50

3-speed VSD, DS, VZ, MC

Explore categories from Clutch

S-10-30-030-010_Fliehkraftkupplung
Centrifugal clutch
S-10-30-030-020_Lamellenkupplung
Multi-plate clutch
S-10-30-030-030_Starterkupplung
Starter clutch
S-10-30-030-040_Kupplungskorb
Clutch basket
S-10-30-030-050_Kupplungsbetaetigung
Clutch actuation

Moped fans also bought

Cover plate clutch torsion spring X30 Z50

For: Puch

10012

Cover plate clutch torsion spring X30 Z50

Puch OEM number: 350.1.12.019.1

CHF 7.90

swiing® revival plain bearing clutch basket | Puch Z50
undefined

For: Puch

10235

swiing® revival plain bearing clutch basket | Puch Z50

Manufacturer: swiing® revival parts · Material: special bearing bronze · Nominal diameter inside: 15 mm · Ø inside: 15 mm · Ø outside: 17 mm · Total height: 16.2 mm

CHF 10.90

Clutch release lever aluminum | Puch Z50, EX30

For: Puch

10388

Clutch release lever aluminum | Puch Z50, EX30

Material: Aluminum · Width: 11.4 mm · Width: 16.4 mm · Total length: 55.5 mm · Height: 7 mm · Height: 14 mm · Area of application: Standard · Puch OEM number: 050.2.1231

CHF 19.90

swiing® ingenious torsion spring clutch lever reinforced +20% | Z50
undefined

For: Puch

10389

swiing® ingenious torsion spring clutch lever reinforced +20% | Z50

Spring design: Torsion spring · Manufacturer: swiing® ingenious parts

CHF 8.90

O-ring decoupling shaft Z50 Ø 6 x 1.5 mm
undefined

For: Puch

11043

O-ring decoupling shaft Z50 Ø 6 x 1.5 mm

Manufacturer: Puch · Place of use: Uncoupling shaft · Ø outside: 9 mm · Ø inside: 6 mm · Cord thickness: 1.5 mm

CHF 2.20

BZ retaining ring Ø 6 mm external

Universal

11044

BZ retaining ring Ø 6 mm external

Fuse type: Outside · Ø outside: 6 mm

CHF 1.40

swiing® revival decoupling shaft | Puch Z50 engine
undefined

For: Puch

20319

swiing® revival decoupling shaft | Puch Z50 engine

Manufacturer: swiing® revival parts · Material: Steel · Surface: gas nitrided · Ø outside: 8 mm · Ø outside: 10 mm · Color: black-matt · Total length: 90.2 mm · Area of application: Original

CHF 29.90

Circlip Ø 6 mm decoupling shaft Puch X30 Z50
undefined

For: Puch

24568

Circlip Ø 6 mm decoupling shaft Puch X30 Z50

Manufacturer: Puch · Place of use: Uncoupling shaft · Fuse type: Inside · Nominal diameter: 6 mm · Puch OEM number: 900.4606

CHF 1.40

O-ring decoupling shaft Z50 Ø 7.5 x 1.5 mm (oversize)
undefined

For: Puch

27375

O-ring decoupling shaft Z50 Ø 7.5 x 1.5 mm (oversize)

Place of use: Uncoupling shaft · Manufacturer: Puch · Ø inside: 7.5 mm · Ø outside: 10.5 mm · Cord thickness: 1.5 mm

CHF 2.20