Socket axle M11x200 made of galvanized steel for your moped, moped and small motorcycle.
The axle can be used for both front wheels (shortened) and rear wheels.
The complete rear axle set is also equipped with the following parts:
- 2 pcs M11 x 1 nuts (SW17 / 10 mm)
- 2 pcs spacer washer (Ø 20 x 2 mm)
- 2 pcs;ck bearing cone (D19 x d13 mm / SW15)
- 3 pcs M11 x 1 nuts (SW17 / 4 mm)
- 2 pcs ball set à 8 balls (Ø 6.32 mm)
Other threaded shafts and individual parts of this set can be found in the accessories section.
Made by the Italian brand CIF.
Details
| Thread type | MF11x1 (fine pitch thread) |
| Manufacturer | CIF |
| Material | Steel |
| Surface | galvanized (blue) |
| Ø ball [inch] / [mm] | 1/4" (6.35 mm) |
| Thread length | 92 mm |
| Height | 10 mm, 4 mm, 2 mm |
| Ø shaft | 10.3 mm |
| Width across flats SW | 17 mm, 15 mm |
| Total length | 200 mm |
| Shank length | 14.5 mm |
| Ball bearing closed | No |
Suitable for the following models
| Puch | |
| Sachs |
Accessories & related products
Wheel axle set M12x1 x 165 mm front
Material: Steel · Surface: burnished · Surface: galvanized (blue) · Total length: 165 mm · Width: 7 mm · Width: 10.2 mm · Width: 32 mm · Height: 9.9 mm · Manufacturer: Quenching · Ø outside: 17.4 mm · Ø outside: 19.9 mm · Ø shaft: 11.9 mm · Thread length: 25 mm · Thread length: 26 mm · Thread type: MF12x1 (fine pitch thread) · Ø inside: 12.6 mm · Ø inside: 13.2 mm · Width across flats SW: 19 mm · Shank length: 114 mm
CHF 14.70
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Area of application: Chemistry · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
CHF 21.90
CHF 2’190.00/l
swiing® revival wheel bearing set M11x1
Ø ball [inch] / [mm]: 7/32" (5.56 mm) · Manufacturer: swiing® revival parts · Material: Steel · Surface: gas nitrided · Diameter: 17.95 mm · Ø outside: 29 mm · Ø inside: 25.85 mm · Height: 10.6 mm · Height: 14.15 mm · Width across flats SW: 15 mm · Thread type: MF11x1 (fine pitch thread)
CHF 43.90
Not in stock
Moped fans like you also bought:
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: KMC · Surface: blank / oiled · Rolling circumference: 1626 mm · Number of chain links: 128 pcs · Chain lock type: Spring lock · Ø bore: 4 mm · Ø Pin: 3.94 mm · Material: Steel · Color: gray
CHF 11.30
CHF 12.50
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Thread type: MF12x1 (fine pitch thread) · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Mounting type: Union nut
CHF 9.90
Collection only possible with online purchase and appointment.
