Bing SSE 15 mm aftermarket tuning carburetor suitable for ILO / JLO mopeds / mopeds.
The racing carburetor also fits Puch MS, VS, MV and DS small engine bikes, provided that the additional flange (item 23645) is used.
If necessary, small adjustments are required to ensure that the air filter fits perfectly.
We recommend the adjustable nozzle (item 16038), which allows the fuel/air mixture to be optimally adjusted.
Hole spacing for cylinder connection: 32 mm
Main diameter: 14
You can find the slanted intake manifold described above, other carburetors and the innovative adjustable nozzle in the accessories section.
| Component group Carburetor | Carburetor complete |
| Carburetor type | SSE |
| Nominal diameter | 15 mm |
| Choke control | Cable choke |
| Ø fuel hose connection | 6 mm |
| Mounting type | Flange |
| Hole spacing inlet | 32 mm |
| Area of application | Standard, Tuning |
| Puch | 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
| ILO / JLO |
Accessories & related products
BING SSE carburetor 12 mm | Puch MV 50, MS 50
Component group Carburetor: Carburetor complete · Area of application: Standard · Area of application: Tuning · Carburetor type: SSE · Choke control: Hand choke · Nominal diameter: 12 mm · Ø fuel hose connection: 6 mm · Mounting type: Flange · Nozzle size: 50 · Hole spacing inlet: 32 mm
CHF 79.90
BING Original floats Bing SSB, SSE & SSN
Manufacturer: BING · Component group Carburetor: Adjusting screws, float, etc. · Ø outside: 22 mm · Carburetor type: SSB · Carburetor type: SSE · Carburetor type: SSN · Height: 23 mm · Total length: 41.4 mm · Color: black · Pony OEM number: A1968 · Sachs OEM no.: 0261 003 001
CHF 28.90
Flange intake manifold angled with stud bolt | Puch MS, VS, MV and DS
Material: Aluminum · Ø inside: 15 mm · Total height: 2.7 mm · Total height: 9.7 mm · Hole spacing inlet: 32 mm · Thread type: M6x1 (standard thread) · Area of application: Tuning · Mounting type: Stud bolts & nuts · Number of fixing points: 2 pcs
CHF 26.50
BING SSE carburetor 12 mm cable choke | ILO / Puch MV, MS, DS
Nominal diameter: 12 mm · Component group Carburetor: Carburetor complete · Carburetor type: SSE · Hole spacing inlet: 32 mm · Ø Inside entrance: 12 mm · Mounting type: Flange · Ø Output inside: 12 mm · Area of application: Standard · Area of application: Tuning · Ø fuel hose connection: 6 mm · Choke control: Cable choke · Nozzle size: 50
CHF 85.90
Moped fans also bought
swiing® revival gasket set Z50 engine | Puch X30 NS / NL
Manufacturer: swiing® revival parts · Material: Sealing paper · Ø outlet inside: 22 mm · Number of components: 10 pcs · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Area of application: Standard
CHF 19.90
Not in stock
GPO 45 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Camouflaged: Yes · Surface: sandblasted · Area of application: Tuning · Ø cylinder: 45 mm · Width: 125 mm · Height: 55 mm · Total length: 135 mm · Number of fixing points: 4 pcs · Candle thread: short · Hole pattern [mm]: 44 x 44 · Decompressor: No
CHF 32.90
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Bearing type: Shoulder bearing · Bearing cage: Brass cage ball-guided · Stock number: E15 · Ø inside: 15 mm · Inner ring width: 8 mm · Manufacturer: NSK · Ball bearing closed: No · Bearing clearance: CN (standard) · Groove ring: No · Material: Brass · Material: Steel · Area of application: Standard · Width: 8 mm · Ø outside: 35 mm · Pony OEM number: A1149 · Sachs OEM no.: 0232 017 006
CHF 24.90
Flange intake manifold angled with stud bolt | Puch MS, VS, MV and DS
Material: Aluminum · Ø inside: 15 mm · Total height: 2.7 mm · Total height: 9.7 mm · Hole spacing inlet: 32 mm · Thread type: M6x1 (standard thread) · Area of application: Tuning · Mounting type: Stud bolts & nuts · Number of fixing points: 2 pcs
CHF 26.50
Working late? Evening hours on Thursday until 20:00
