Original bell for your Piaggio Ciao C24 and Si FL moped / moped.
The bell was installed on the last model series (approx. 1999 - 2006).
The bell is attached using the threaded rod in the corresponding hole in the handle set.
Length of threaded rod: 42 mm
Thread: M5
Original Piaggio spare part. NOS – New from old stock.
Original Piaggio spare part number: 269798
| Manufacturer | Piaggio |
| Material | Sheet metal (steel), Steel |
| Surface | chrome-plated |
| Color | Chrome |
| Total length | 42 mm |
| Thread size | M5 |
| Width | 75 mm |
| Height | 67.2 mm |
| Ø External head | 55 mm |
| Piaggio OEM number | 269798 |
| Piaggio | Ciao - C24 Si |
Accessories & related products
Stop nut M5 Inox
Material: Chrome steel (colloquially known as stainless steel) · Nut type: Self-securing nut · Thread type: M10x1.5 (standard thread) · Thread type: M4x0.7 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M7x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Nominal diameter (thread): 4 mm · Nominal diameter (thread): 5 mm · Nominal diameter (thread): 6 mm · Nominal diameter (thread): 7 mm · Nominal diameter (thread): 8 mm · Nominal diameter (thread): 10 mm · Drive: External hexagon
CHF 0.70
Explore categories from Bell & Accessories
Moped fans also bought
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø nipple: 3 mm · Nipple length: 5 mm · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Number of components: 1 pcs · Area of application: Standard
CHF 2.40
Hot
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Mounting type: Union nut
CHF 9.90
CIF Clamping screw front brake | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: CIF · Material: Steel · Surface: galvanized (blue) · Thread type: M7x1 (standard thread) · Drive: External hexagon · Ø outside: 11 mm · Screw head: Hexagon · Number of components: 6 pcs · Total length: 25 mm · Width across flats: 11 mm · Thread length: 19.5 mm · Area of application: Standard
CHF 3.90
Fuel tap vertical M12x1 (with union nut) outgoing right | Piaggio SI
Manufacturer: Made in Italy · Possible lever positions: open / closed / reserve · Material lever: Plastic · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: vertical / vertical · Outlet direction: right · Spare tube shape: straight · Ø fuel hose connection: 6 mm · Reserve level: 65 mm · Mounting type: Union nut
CHF 12.50
Reflector & glass white | Piaggio Ciao PX, C24, Boss
Width: 119 mm · Manufacturer: Made in Italy · Material: Plastic · Test mark: none · Bulb holder: P26s · Bulb holder: Soffit pear · Color: white · Height: 85 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Hole spacing: 104 mm
CHF 24.90
Not in stock
swiing® revival clamping screw rear brake | Piaggio Ciao, SI, Bravo, Boxer
Material: Steel · Surface: galvanized (blue) · Manufacturer: swiing® revival parts · Thread type: M7x1 (standard thread) · Ø Cable bushing: 2.1 mm · Drive: External hexagon · Screw head: Hexagon · Number of components: 3 pcs · Ø shaft: 10.5 mm · Total length: 21.5 mm · Width across flats: 11 mm · Thread length: 11 mm · Width across flats: 14 mm · Alternative version of the Piaggio OEM number: 154533
CHF 5.80
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
