47.0 mm piston with two standard rectangular piston rings with internal circlips (IS) for the MetraKit cylinder on your Puch moped / moped.
The detailed dimensions of the piston according to the technical drawing can be found in the details. You can also find out about the relevant piston rings, their positions and locking types on the legend in the pictures.
The piston kit contains piston pins, piston clips and piston rings.
Corresponding assembly tools, piston rings, piston pin retainers etc. can be found under accessories.
Quality product from the Spanish manufacturer Barikit.
Details
| Manufacturer | Barikite |
| Nominal diameter | 47 mm |
| Ø outside piston (A) | 47 mm |
| Compression height (C) | 22.1 mm |
| Curvature (D) | 3.47 mm |
| Total piston height (E) | 52.47 mm |
| Number of piston rings (F) | 2 pcs |
| Piston ring mold | Rectangular ring |
| Piston ring impact | Internal fuse (IS) |
| Ø piston pin (B) | 12 mm |
| Piston weight | 115 g |
Suitable for the following models
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
Metrakit 47 mm cylinder kit 75 ccm
Manufacturer: Metracite · Material: Gray cast iron · Camouflaged: No · Surface: varnished · Crankshaft stroke: 43 mm · Displacement: 75 ccm · Ø piston pin (B): 12 mm · Nominal diameter: 47 mm · Number of fixing points: 4 pcs · Thread inlet: M6x1 (standard thread) · Hole spacing outlet: 42 mm · Outlet type: slanted · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Area of application: Tuning
CHF 339.90
Not in stock
Barikit piston 48 mm MetraKit cylinder oversize | Puch
Manufacturer: Barikite · Nominal diameter: 48 mm · Ø outside piston (A): 47.95 mm · Ø piston pin (B): 12 mm · Compression height (C): 22 mm · Curvature (D): 3.45 mm · Total piston height (E): 52.45 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1 mm · Piston weight: 124 g
CHF 64.90
Moped fans like you also bought:
Dell'Orto 19 mm PHBG CS carburetor hand choke
Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: PHBG CS · Color: black · Nominal diameter: 19 mm · Width: 70 mm · Mounting type: Plug connection clamped · Height: 124 mm · Ø without reducing sleeve: 26 mm · Ø Inside entrance: 19 mm · Ø Output inside: 19 mm · Ø Air filter connection: 32 mm · Ø Air filter connection: 60 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Ø Internal connection: 24 mm · Total length: 82 mm · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Area of application: Racing · Area of application: Tuning · Choke nozzle size: 60 · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 75 · Size of secondary nozzle: 45
CHF 119.90
swiing® revival M8x12 oil drain plug & copper ring | Puch E50, Z50
Manufacturer: swiing® revival parts · Material: Copper · Material: Steel · Surface: galvanized (blue) · Color: silver · Total length: 18 mm · Screw head: Hexagon · Thread length: 12 mm · Drive: External hexagon · Drive: Slot · Thread type: M8x1.25 (standard thread) · Width across flats Screw: 13 mm · Puch OEM number: 901.1053
CHF 3.50
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Number of components: 1 pcs · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard
CHF 2.80
Starter cable Ø 1.5 mm x 160 cm | Puch Maxi
Manufacturer: Made in Germany · Ø nipple: 8 mm · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.5 mm · Nipple shape: Barrel (transverse) · Area of application: Standard · Cable length: 1600 mm · Nipple length: 12 mm
CHF 2.80
Collection only possible with online purchase and appointment.
