profile
All wishlists Community wishlists
Carousel Image 1
Carousel Image 2
Carousel Image 3
logo_badass

For: Sachs

38473

BAD ASS cylinder head XL Ø 45-47 mm | Sachs 502, 50/2, 50/3, 50/4

CHF 139.90

Incl. 8.1% VAT.

Description

Ø 45 - 47 mm XL cylinder head in original look with enlarged cooling fins, suitable for your moped / moped with Sachs 502, 50/2, 50/3, 50/4 engine.

This tuning head was specially developed for the BAD ASS Diablo Ø 45 mm racing cylinder. Thanks to the larger cooling fin design, the cylinder head can optimally dissipate heat even at high temperatures and when driving slowly uphill.

The hole for the decompressor is prepared and provided with a thread (M10 x 1.5 mm). If this is installed, it only needs to be drilled through with a 3 mm drill bit.

ManufacturerBAD ASS
MaterialAluminum
Area of applicationTuning, Racing
Height61 mm
Ø cylinder45 - 47 mm
Hole pattern [mm]47 x 47
Candle threadshort
Ø outside108 mm, 85.5 mm
DecompressorM10x1.5
Number of fixing points4 pcs
Ø screw holder19.3 mm
Sachs

50 (Fahrtwind, 1.25 / 1.5 hp, DE)

502 (Saxonette) - AL , AML

50/2 - L CH (0.8 PS) , ML CH (0.8 PS) , MB (2.6 PS) , MLB (2.6 PS)

50/3

50/4 - MLFB (2.6 PS) , LKH (4.5 PS)

Accessories & related products

swiing® revival Silentblock Ø 19.3 x 15 | Sachs 50/2, 50/3
undefined

For: Sachs

16078

swiing® revival Silentblock Ø 19.3 x 15 | Sachs 50/2, 50/3

Manufacturer: swiing® revival parts · Material: Rubber · Material: Steel · Ø inside: 9 mm · Ø outside: 19.3 mm · Total length: 15 mm

CHF 6.90

Nos
Karcoma decompressor M10x1.5 45° NOS
undefined

For: Sachs · Zündapp Belmondo

17512

Karcoma decompressor M10x1.5 45° NOS

Manufacturer: Karcoma · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Thread type: M10x1.5 (standard thread) · Total length: 64 mm · Width across flats: 14 mm · Angle: 45 ° · Thread length: 9 mm

CHF 39.90

swiing® revival bolt set cylinder head galvanized | Sachs 503 / 50/2 / 50/3 / 50/4
undefined

For: Sachs

18008

swiing® revival bolt set cylinder head galvanized | Sachs 503 / 50/2 / 50/3 / 50/4

Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Color: silver · Number of components: 12 pcs · Total length: 34 mm · Drive: External hexagon · Screw head: Hexagon · Ø shaft: 5.85 mm · Thread type: M6x1 (standard thread) · Shank: Yes · Nominal diameter (thread): 6 mm · Shank length: 8 mm · Width across flats: 10 mm · Strength class: 10.9 · Thread length: 22 mm

CHF 4.90

swiing® ingenious reinforcement set clutch (+40%) | Sachs 503, 50/2 (502), 50/3, 50/4
undefined

For: Sachs

21002

swiing® ingenious reinforcement set clutch (+40%) | Sachs 503, 50/2 (502), 50/3, 50/4

Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Area of application: Tuning · Number of springs: 9 pcs · Thickness: 1.4 mm · Ø inside: 5.6 mm · Ø outside: 8.75 mm

CHF 34.90

NGK (B5HS - B10HS) spark plug short thread
undefined
angle-right

Universal

11514

NGK B8HS spark plug short thread

Manufacturer: NGK · Candle thread type: short · Spark plug socket: M4 · Suppressed: No · Spark plug socket: SAE · Thread type: MF14x1.25 (fine pitch thread) · Width across flats: 21 mm

CHF 5.90

NGK (B5HS - B10HS) spark plug short thread
undefined
angle-right

Universal

11514

NGK B7HS spark plug short thread

Manufacturer: NGK · Candle thread type: short · Spark plug socket: M4 · Suppressed: No · Spark plug socket: SAE · Thread type: MF14x1.25 (fine pitch thread) · Width across flats: 21 mm

CHF 5.90

New
Nos
Karcoma Decompressor M10x1.5 NOS | Sachs 502
undefined

For: Universal · Sachs

37888

Karcoma Decompressor M10x1.5 NOS | Sachs 502

Manufacturer: Karcoma · Material: Steel · Surface: galvanized (blue) · Thread type: M10x1.5 (standard thread) · Total length: 54 mm · Thread length: 9.5 mm · Width across flats: 14 mm · Area of application: Standard · Pony OEM number: A2934

CHF 49.90

BAD ASS 45 mm cylinder "Diablo" | Sachs 502, 50/2, 50/3, 50/4
undefined

For: Sachs

38472

BAD ASS 45 mm cylinder "Diablo" | Sachs 502, 50/2, 50/3, 50/4

Manufacturer: BAD ASS · Material: Aluminum · Material: Gray cast iron · Camouflaged: Yes · Area of application: Racing · Area of application: Tuning · Crankshaft stroke: 42 mm · Displacement: 67 ccm · Nominal diameter: 45 mm · Ø piston pin (B): 12 mm · Hole spacing inlet: 31 mm · Ø cylinder neck: 49.9 mm · Ø Outlet outside: 40 mm · Ø outlet inside: 28 mm · Number of fixing points: 4 pcs · Inlet window: 17.5 x 15.5 mm · Thread inlet: M5x0.8 (standard thread) · Decompressor: No · Outlet type: Union nut · Hole pattern [mm]: 60 x 40 / 51 x 40 / 47 x 47 · Thread outlet: MF40x1.5 (fine pitch thread)

CHF 329.90

Explore categories from Cylinder

S-10-60-030_Zylinder_Rennsatz
Cylinder & racing set
S-10-60-040_Zylinderkopf
Cylinder head
S-10-60-020_Kolben
Piston
S-10-60-010_Dichtungen
Seals
S-10-60-050_Zubehoer_Dekompressor
Decompressor & tools & accessories

Moped fans also bought

NSK E15 shoulder ball bearing 15/35/8 (A1149)
undefined

For: Sachs

11989

NSK E15 shoulder ball bearing 15/35/8 (A1149)

Bearing type: Shoulder bearing · Bearing cage: Brass cage ball-guided · Width: 8 mm · Stock number: E15 · Inner ring width: 8 mm · Manufacturer: NSK · Ball bearing closed: No · Bearing clearance: CN (standard) · Groove ring: No · Material: Brass · Material: Steel · Area of application: Standard · Ø inside: 15 mm · Ø outside: 35 mm · Pony OEM number: A1149 · Sachs OEM no.: 0232 017 006

CHF 24.90

32 mm copper ring 30.6/37.8 flame tube | Sachs

For: Universal · Sachs

12136

32 mm copper ring 30.6/37.8 flame tube | Sachs

Ø inside: 30.6 mm · Ø outside: 37.8 mm · Material: Copper

CHF 4.90

swiing® revival exhaust nut M40x1.5 for 32 mm pipe, galvanized | Sachs
undefined

For: Sachs

12140

swiing® revival exhaust nut M40x1.5 for 32 mm pipe, galvanized | Sachs

Ø inside: 33.5 mm · Ø outside: 46 mm · Height: 19 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF40x1.5 (fine pitch thread) · Nut type: Union nut · Nominal diameter (thread): 40 mm

CHF 13.90

swiing® revival Spring Cup Clutch | Sachs 50/2, 503 2AL / 2BL
undefined

For: Sachs

15072

swiing® revival Spring Cup Clutch | Sachs 50/2, 503 2AL / 2BL

Manufacturer: swiing® revival parts · Pony OEM number: A3884 · Sachs OEM no.: 0659 006 000

CHF 4.90

Intake Gasket 2.6 mm Bing 17 mm SSB | Sachs (50/2), 50/3, 50/4

For: Sachs

21571

Intake Gasket 2.6 mm Bing 17 mm SSB | Sachs (50/2), 50/3, 50/4

Place of use: Admission · Thickness: 2.6 mm · Hole spacing inlet: 30 mm

CHF 5.90

GPO Stud Bolt M6x62
undefined

Universal

35591

GPO Stud Bolt M6x62

Manufacturer: GPO · Material: Steel · Surface: blackened · Total length: 62 mm · Thread type: M6x1 (standard thread) · Diameter: 5.3 mm · Nominal diameter (thread): 6 mm · Thread length: 7.8 mm · Strength class: 10.9 · Thread length: 11.8 mm

CHF 2.80

BAD ASS 45 mm cylinder "Diablo" | Sachs 502, 50/2, 50/3, 50/4
undefined

For: Sachs

38472

BAD ASS 45 mm cylinder "Diablo" | Sachs 502, 50/2, 50/3, 50/4

Manufacturer: BAD ASS · Material: Aluminum · Material: Gray cast iron · Camouflaged: Yes · Area of application: Racing · Area of application: Tuning · Crankshaft stroke: 42 mm · Displacement: 67 ccm · Nominal diameter: 45 mm · Ø piston pin (B): 12 mm · Hole spacing inlet: 31 mm · Ø cylinder neck: 49.9 mm · Ø Outlet outside: 40 mm · Ø outlet inside: 28 mm · Number of fixing points: 4 pcs · Inlet window: 17.5 x 15.5 mm · Thread inlet: M5x0.8 (standard thread) · Decompressor: No · Outlet type: Union nut · Hole pattern [mm]: 60 x 40 / 51 x 40 / 47 x 47 · Thread outlet: MF40x1.5 (fine pitch thread)

CHF 329.90

BAD ASS 45 mm cylinder "Diablo" incl. head | Sachs 502, 50/2, 50/3, 50/4
undefined

For: Sachs

38556

BAD ASS 45 mm cylinder "Diablo" incl. head | Sachs 502, 50/2, 50/3, 50/4

Manufacturer: BAD ASS · Material: Aluminum · Material: Gray cast iron · Camouflaged: Yes · Area of application: Racing · Area of application: Tuning · Crankshaft stroke: 42 mm · Displacement: 67 ccm · Nominal diameter: 45 mm · Ø piston pin (B): 12 mm · Hole spacing inlet: 31 mm · Ø cylinder neck: 49.9 mm · Ø Outlet outside: 28 mm · Ø outlet inside: 28 mm · Number of fixing points: 4 pcs · Inlet window: 17.5 x 15.5 mm · Thread inlet: M5x0.8 (standard thread) · Decompressor: No · Outlet type: Union nut · Hole pattern [mm]: 60 x 40 / 51 x 40 / 47 x 47 · Thread outlet: MF40x1.5 (fine pitch thread)

CHF 459.90