Racing cylinder of the Athena brand for Sachs 504 (with adaptations), 505, 508 & 535 engines, which were installed on Hercules Prima M, 2, 3, 4, 5 and Optima mopeds / mopeds, among others.
Thanks to the large intake, overflow and exhaust, this tuning cylinder provides a considerable increase in performance.
Technical data cylinder:
- Intake port diameter: 19 mm and 24 mm
- Ø inner exhaust flange: 20 mm
- Ø connection exhaust flange: 25.7 mm
- Distance stud bolt exhaust flange: 50 mm
- Ø Thread exhaust flange: M8
- Ø Cylinder neck: 51.6 mm
- Stroke: 44 mm
- Bore: 48.0 mm
- Thread for decompressor: M10 x 1.5 mm
The intake manifold with diaphragm system for Dell'Orto SHA or PHBG carburetor and exhaust flange is included in the scope of delivery.
Notes:
Plugs with long thread must be used.
For Swiss 504 engines (42 mm stroke), the following modifications must be made to the cylinder:
- Adjust the cylinder base and gasket as shown in Figure 6 .
- The cylinder base must be turned off so that the compression is adjusted again due to the shorter stroke, we recommend setting a crushing edge of 0.8 - 1.0 mm.
- On models with an external clutch lever, the intake must be extended, otherwise the carburetor may come into contact with the clutch lever.
As experience has shown that the steel diaphragm plates supplied can break, we recommend replacing them with carbonite diaphragm plates.
It is known that the Athena exhaust flange included in the cylinder set can only be fitted with laborious adjustments due to incorrect holes and a missing seal. The swiing® exhaust adapter is supplied with a seal and the appropriate countersunk screws and solves this problem without any adjustment work.
| Manufacturer | Athena |
| Camouflaged | No |
| Material | Aluminum |
| Surface | sandblasted |
| Crankshaft stroke | 44 mm |
| Hole spacing inlet | 32.5 mm |
| Nominal diameter | 48 mm |
| Ø cylinder neck | 51.8 mm |
| Ø Outlet outside | 26 mm |
| Ø outlet inside | 19.4 mm |
| Ø Inlet inside | 14.7 mm, 17.8 mm |
| Inlet window | 31.9 x 36.2 |
| Hole spacing outlet | 50 mm |
| Thread inlet | M5x0.8 (standard thread) |
| Hole pattern [mm] | 56/60 x 56 |
| Ø piston pin (B) | 12 mm |
| Outlet type | straight, clamped |
| Decompressor | M10x1.5 |
| Thread outlet | M8x1.25 (standard thread) |
| Number of fixing points | 4 pcs |
| Area of application | Tuning |
| Sachs | 505 (with pedal shaft) - 1A (AT) , 2A (HG) 508 - 1 A 535 |
| Hercules | Great - 2 , 3 , 4 , 5 , Optima |
Ratings
Accessories & related products
Athena piston 48 mm #B | Sachs 504 / 505
Manufacturer: Athena · Ø outside piston (A): 47.96 mm · Compression height (C): 30.12 mm · Curvature (D): 1.94 mm · Nominal diameter: 48 mm · Total piston height (E): 59 mm · Number of piston rings (F): 1 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Ø piston pin (B): 12 mm · Tolerance group: B · Weight piston kit: 123 g
CHF 68.90
Not in stock
Athena piston 48 mm #A | Sachs 504 / 505
Manufacturer: Athena · Ø outside piston (A): 47.94 mm · Compression height (C): 30.2 mm · Curvature (D): 1.94 mm · Nominal diameter: 48 mm · Total piston height (E): 59.05 mm · Number of piston rings (F): 1 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Ø piston pin (B): 12 mm · Tolerance group: A · Weight piston kit: 123 g
CHF 68.90
NGK B9ES spark plug long thread
Manufacturer: NGK · Candle designation: B9ES · Candle thread type: long · Spark plug socket: M4 · Spark plug socket: SAE · Suppressed: No · Thread type: MF14x1.25 (fine pitch thread) · Area of application: Original · Area of application: Standard · Width across flats: 21 mm
CHF 6.50
swiing ingenious exhaust adapter 24 mm Athena cylinder| Sachs 504, 505, 508
Ø inside: 20 mm · Ø outside: 24 mm · Total length: 67 mm · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Width: 43 mm · Height: 25.5 mm · Hole spacing: 50 mm · Ø mounting hole: 8.3 mm
CHF 24.90
Explore categories from Cylinder
Moped fans also bought
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch · Temperature resistance (min.): -30 - 220 °C
CHF 10.90
CHF 24.22/l
DMP intake rubber Ø 33.5 / 33.5 x 31.5 with clamps
Manufacturer: DMP · Material: Rubber · Overall length (A): 31.3 mm · Color: black · Ø Passage (B): 30.7 mm · Ø inside (C): 33.5 mm · Ø inside 2 (D): 33.5 mm · Ø outside (E): 46.5 mm · Ø outside 2 (F): 46.5 mm · Ø External connection (G): 46.5 mm · Ø External connection 2 (H): 46.5 mm · Ø Clamping (I): 32.5 mm · Ø Clamping 2 (K): 32.5 mm
CHF 12.90
Petrol filter large 6 / 8 mm orange
Ø inside: 4.2 mm · Ø outside: 38 mm · Total length: 49 mm · Total length: 108 mm · Material: Paper · Material: Plastic · Color: transparent · Color: white · Color: yellow · Filter type: Filter paper · demountable: No · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 8 mm
CHF 4.90
NGK B7ES spark plug long thread
Manufacturer: NGK · Candle designation: B7ES · Candle thread type: long · Spark plug socket: M4 · Spark plug socket: SAE · Suppressed: No · Thread type: MF14x1.25 (fine pitch thread) · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Width across flats: 21 mm
CHF 6.50
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
