19 mm tuning intake manifold for Puch X30 Sport mopeds / mopeds with Z50 engine and Puch Maxi models which have an E50 engine installed.
The CNC-milled intake manifold is designed for Dell'Orto PHBG carburettors and has a round opening on the cylinder side.
On the Puch X30 it is still possible to fit the original side skirts, but it is not possible to operate the hand choke or fit an air filter. Cable chokes and replicas of the carburetor with service hatch at the bottom cannot be fitted.
| Manufacturer | AKOA |
| Camouflaged | No |
| Material | Aluminum |
| Ø inside | 19 mm |
| Ø External connection | 24 mm |
| Mounting type | Nuts |
| Number of fixing points | 2 pcs |
| Hole spacing inlet | 38 mm |
| Area of application | Tuning |
| Total height | 68 mm |
| Height flange center hole | 57 mm |
| Puch | E50 Z50 (X30 Sport) |
Ratings
Accessories & related products
Dell'Orto 19 mm PHBG CS carburetor hand choke
Nominal diameter: 19 mm · Manufacturer: Dell'Orto · Material: Aluminum · Component group Carburetor: Carburetor complete · Color: black · Carburetor type: PHBG CS · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Width: 70 mm · Ø without reducing sleeve: 26 mm · Ø Inside entrance: 19 mm · Ø Internal connection: 24 mm · Ø Output inside: 19 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 32 mm · Ø Air filter connection: 60 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Total length: 82 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Height: 124 mm · Choke control: Hand choke · Choke nozzle size: 60 · Nozzle thread: M5x0.8 (standard thread) · Camouflaged: No · Nozzle size: 75 · Area of application: Racing · Area of application: Tuning · Size of secondary nozzle: 45
CHF 119.90
swiing® revival nozzle set M5 (92 - 110) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Drive: Slot · Total length: 8 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98 · Nozzle size: 100 · Nozzle size: 102 · Nozzle size: 104 · Nozzle size: 106 · Nozzle size: 108 · Nozzle size: 110
CHF 20.90
swiing® ingenious intake manifold 16 mm | Puch X30 NS, NL, Sprinter
Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Ø inside: 16 mm · Total length: 48 mm · Ø External connection: 20 mm · Hole spacing inlet: 38 mm · Total height: 70 mm · Mounting type: Screws · Number of fixing points: 2 pcs
CHF 49.90
GPO 19.5 mm PHBG AS carburetor hand choke (Dell'Orto replica)
Nominal diameter: 19.5 mm · Manufacturer: GPO · Total length: 71.5 mm · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: PHBG AS · Color: black · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Area of application: Tuning · Ø without reducing sleeve: 26 mm · Ø Internal connection: 24 mm · Width: 71 mm · Height: 123 mm · Ø Air filter connection: 32 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Mounting type: Plug connection clamped · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 55 · Nozzle thread: M5x0.8 (standard thread) · Nozzle block: 262AU · Camouflaged: No · Nozzle size: 85 · Size of secondary nozzle: 50
CHF 79.90
swiing® ingenious intake manifold 15 mm | Puch X30 NS, NL, Sprinter
Manufacturer: swiing® ingenious parts · Material: Aluminum · Ø inside: 15 mm · Total length: 48 mm · Area of application: Tuning · Ø External connection: 20 mm · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Total height: 70 mm · Mounting type: Screws
CHF 69.90
AKOA intake manifold 19 mm PHBG angular | Puch X30 NS, NL Z50, E50
Manufacturer: AKOA · Material: Aluminum · Area of application: Tuning · Mounting type: Nuts · Ø inside: 19 mm · Ø External connection: 24 mm · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Total height: 68 mm · Height flange center hole: 57 mm · Camouflaged: No
CHF 69.90
Explore categories from Carburetor & intake system
Moped fans also bought
Dell'Orto 19 mm PHBG CS carburetor hand choke
Nominal diameter: 19 mm · Manufacturer: Dell'Orto · Material: Aluminum · Component group Carburetor: Carburetor complete · Color: black · Carburetor type: PHBG CS · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Width: 70 mm · Ø without reducing sleeve: 26 mm · Ø Inside entrance: 19 mm · Ø Internal connection: 24 mm · Ø Output inside: 19 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 32 mm · Ø Air filter connection: 60 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Total length: 82 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Height: 124 mm · Choke control: Hand choke · Choke nozzle size: 60 · Nozzle thread: M5x0.8 (standard thread) · Camouflaged: No · Nozzle size: 75 · Area of application: Racing · Area of application: Tuning · Size of secondary nozzle: 45
CHF 119.90
- 12 %
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Number of components: 1 pcs
CHF 2.40
CHF 2.10
- 12 %
Hot
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Cable length: 2200 mm · Number of components: 1 pcs
CHF 2.40
CHF 2.10
Collection only possible with online purchase and appointment.
