38 mm tuning cylinder in the "Power Edition" version made of aluminum with 50 cc displacement suitable for mopeds / mopeds with Sachs 503 2AL, AAL, 2BL, ABL CH engine.
The tuning kit is made of cast aluminum with nickel silicon carbide coating (colloquially known as Nikasil).
The tuning kit made of cast aluminum with nickel-silicon carbide coating (colloquially known as Nikasil) offers a good increase in performance over the entire speed range, with a focus on low speeds and high torque. Compared to the original cylinder, the sealing has been removed on this tuning cylinder and the intake has been enlarged. The overflow channels as well as the exhaust and intake have been adapted to optimize the timing. In addition, the exhaust duct has been designed at a more favorable angle. All housing covers can still be fitted.
| Manufacturer | AKOA |
| Material | Aluminum |
| Camouflaged | No |
| Surface | Nickel silicon carbide (colloquially known as Nikasil) |
| Displacement | 50 ccm |
| Nominal diameter | 38 mm |
| Crankshaft stroke | 43 mm |
| Ø piston pin (B) | 12 mm |
| Ø cylinder neck | 45.5 mm |
| Ø Outlet outside | 25.9 mm |
| Ø outlet inside | 20.5 mm |
| Ø Inlet inside | 15.8 mm |
| Number of fixing points | 4 pcs |
| Thread inlet | M6x1 (standard thread) |
| Area of application | Tuning |
| Hole pattern [mm] | 40 x 60 / 37 x 37 |
| Outlet type | clamped |
| Decompressor | No |
| Hole spacing inlet | 32 mm |
| Sachs | 503 - AAL , ABL , 2AL / 2BL |
Ratings
Accessories & related products
Hot 
swiing® ingenious 15 mm carburetor camouflaged | Sachs 503
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Nominal diameter: 15 mm · Carburetor type: SRE · Width: 50 mm · Height: 95 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Total length: 66 mm · Mounting type: Plug connection clamped · Area of application: Tuning · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
CHF 79.90
GPO 41 mm "Pomodoro" cylinder kit | Sachs 503
Nominal diameter: 41 mm · Manufacturer: GPO · Material: Gray cast iron · Displacement: 57 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 22 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Hole pattern [mm]: 40 x 60 / 37 x 37 · Area of application: Tuning
CHF 179.90
Not in stock
GPO 43 mm "Pomodoro" cylinder kit | Sachs 503 2AL, AAL, 2BL, ABL
Nominal diameter: 43 mm · Manufacturer: GPO · Material: Gray cast iron · Displacement: 63 ccm · Area of application: Tuning · Crankshaft stroke: 43 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 22 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 40 x 60 / 37 x 37 · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Alternative version of the Pony OEM number: A1087 · Alternative version of the Sachs OEM number: 0213 142 000
CHF 219.90
swiing® ingenious 15 mm intake manifold short version | Sachs 503 2AL, 2BL
Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Total length: 50 mm · Ø inside: 15 mm · Thread type: M6x1 (standard thread) · Number of fixing points: 2 pcs · Ø External connection: 20 mm · Hole spacing inlet: 32 mm · Alternative version of the Pony OEM number: A2177
CHF 49.90
swiing® ingenious decompressor set | Sachs 503
Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Chrome steel (colloquially known as stainless steel) · Material: Copper · Area of application: Standard · Material: Steel · Total length: 21.5 mm · Ø outside: 14 mm · Thread type: M10x1.5 (standard thread) · Width across flats: 14 mm · Thread length: 14 mm · Sachs OEM no.: 0291 013 300
CHF 56.90
AKOA 38 mm cylinder head for decovalve | Sachs 503 2AL, AAL, 2BL, ABL
Manufacturer: AKOA · Ø outside: 84 mm · Height: 29 mm · Material: Aluminum · Area of application: Tuning · Ø cylinder: 38 mm · Hole pattern [mm]: 37 x 37 · Candle thread: short · Decompressor: M10x1.5 · Number of fixing points: 4 pcs · Alternative version of the Pony OEM number: A1087 · Alternative version of the Sachs OEM number: 0213 142 000
CHF 59.90
AKOA 38 mm cylinder head "Power-Edition" | Sachs 503 2AL, AAL, 2BL, ABL
Manufacturer: AKOA · Ø outside: 84 mm · Height: 29 mm · Material: Aluminum · Area of application: Tuning · Ø cylinder: 38 mm · Hole pattern [mm]: 37 x 37 · Candle thread: short · Decompressor: No · Number of fixing points: 4 pcs · Alternative version of the Pony OEM number: A1087 · Alternative version of the Sachs OEM number: 0213 142 000
CHF 49.90
Not in stock
AKOA 41 mm cylinder kit "Power-Edition" | Sachs 503 2AL, AAL, 2BL, ABL
Manufacturer: AKOA · Material: Aluminum · Area of application: Tuning · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 57 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 41 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.8 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 40 x 60 / 37 x 37 · Hole spacing inlet: 32 mm · Decompressor: No · Ø piston pin (B): 12 mm · Number of fixing points: 4 pcs · Outlet type: clamped · Camouflaged: No
CHF 179.90
Not in stock
AKOA 40 mm cylinder kit "Power-Edition" | Sachs 503 2AL, AAL, 2BL, ABL
Nominal diameter: 40 mm · Manufacturer: AKOA · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 54 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.8 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Hole pattern [mm]: 40 x 60 / 37 x 37 · Decompressor: No · Camouflaged: No · Area of application: Tuning
CHF 179.90
AKOA 43 mm cylinder kit "Power-Edition" | Sachs 503 2AL, AAL, 2BL, ABL
Nominal diameter: 43 mm · Manufacturer: AKOA · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 63 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Number of fixing points: 4 pcs · Ø Inlet inside: 15.8 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 40 x 60 / 37 x 37 · Hole spacing inlet: 32 mm · Decompressor: No · Ø piston pin (B): 12 mm · Outlet type: clamped · Camouflaged: No · Area of application: Tuning
CHF 229.90
Explore categories from Cylinder
Moped fans also bought
Hot
KMC drive chain 415H (reinforced) 128L
Chain type: 415H · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 128 pcs · Chain pitch: 1/2" x 3/16" · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Ø bore: 4 mm · Ø Pin: 3.94 mm
CHF 12.50
swiing® revival gearbox cover gasket | Sachs 503 AAL, ABL, AB, AC, ADV, 2AL, 2BL (A1888)
Color: sand-colored · Manufacturer: swiing® revival parts · Thickness: 0.35 mm · Total length: 200 mm · Material: Sealing paper · Number of components: 1 pcs · Width: 130 mm · Number of fixing points: 6 pcs · Pony OEM number: A1888 · Sachs OEM no.: 0250 150 000
CHF 5.40
Hot
swiing® ingenious 15 mm carburetor camouflaged | Sachs 503
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Nominal diameter: 15 mm · Carburetor type: SRE · Width: 50 mm · Height: 95 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Total length: 66 mm · Mounting type: Plug connection clamped · Area of application: Tuning · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
CHF 79.90
swiing® revival air filter Racing | Sachs 503
Manufacturer: swiing® revival parts · Material: Plastic · Color: black · Filter type: Racing screen · Total length: 165 mm · Ø Internal connection: 20 mm · Height: 52 mm · Camouflaged: No · Mounting type: Plug connection clamped · Width: 68 mm · Area of application: Tuning
CHF 59.90
swiing® ingenious 15 mm intake manifold short version | Sachs 503 2AL, 2BL
Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Total length: 50 mm · Ø inside: 15 mm · Thread type: M6x1 (standard thread) · Number of fixing points: 2 pcs · Ø External connection: 20 mm · Hole spacing inlet: 32 mm · Alternative version of the Pony OEM number: A2177
CHF 49.90
AKOA 38 mm cylinder head for decovalve | Sachs 503 2AL, AAL, 2BL, ABL
Manufacturer: AKOA · Ø outside: 84 mm · Height: 29 mm · Material: Aluminum · Area of application: Tuning · Ø cylinder: 38 mm · Hole pattern [mm]: 37 x 37 · Candle thread: short · Decompressor: M10x1.5 · Number of fixing points: 4 pcs · Alternative version of the Pony OEM number: A1087 · Alternative version of the Sachs OEM number: 0213 142 000
CHF 59.90
AKOA 38 mm cylinder head "Power-Edition" | Sachs 503 2AL, AAL, 2BL, ABL
Manufacturer: AKOA · Ø outside: 84 mm · Height: 29 mm · Material: Aluminum · Area of application: Tuning · Ø cylinder: 38 mm · Hole pattern [mm]: 37 x 37 · Candle thread: short · Decompressor: No · Number of fixing points: 4 pcs · Alternative version of the Pony OEM number: A1087 · Alternative version of the Sachs OEM number: 0213 142 000
CHF 49.90
Not in stock
AKOA 38 mm cylinder kit "Power-Edition" with head (selection) | Sachs 503 2AL, AAL, 2BL, ABL
Nominal diameter: 38 mm · Manufacturer: AKOA · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.8 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Hole pattern [mm]: 40 x 60 / 37 x 37 · Camouflaged: No · Area of application: Tuning
CHF 209.90
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
