Sticker set for the tank of your Puch X30 NS, N-2AH, NG-2A and NG-2AH moped / moped.
The decals are often also used on converted Puch X30 NL.
The decal set contains the two lettering characters «PUCH» and a rolled-up end line.
These are high-quality, UV and petrol-resistant film plot decals. The decals have been mounted on a transfer film to make installation easier.
Tank sticker dimensions: 290x51 mm
Trim line dimensions: 1000x3 mm
Durability: UV-resistant, petrol-resistant
Surface: glossy
Color: yellow
The area to be covered should be free of grease and dirt in order to provide a firm hold for the adhesive.
Suitable cleaning cloths and other tank adhesives can be found in the accessories
.
Details
| Place of use | Tank (+ frame) |
| Material | Polyvinyl chloride (PVC) |
| Color | yellow |
| Rear side texture | Adhesive |
| Consistency | UV-resistant, petrol resistant |
Suitable for the following models
| Puch |
Accessories & related products
Moped fans like you also bought:
GPO chain tensioner | Puch Maxi S
Manufacturer: GPO · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Total length: 175 mm · Number of teeth: 10 pcs · Ø outside sprocket: 36 mm · Number of fixing points: 1 pcs · Color: black · Color: silver · Thread type: M6x1 (standard thread)
CHF 9.90
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Thickness: 4.5 mm · Manufacturer: GPO · Material: Steel · Surface: powder-coated · Number of teeth: 45 pcs · Ø inside: 94 mm · Color: black · Number of fixing points: 6 pcs · Hole spacing 2: 68 mm · Ø mounting hole: 6.7 mm · Cranking (offset): 8 mm · Ø bolt circle: 105.5 mm · Hole spacing: 36.5 mm
CHF 19.90
swiing® revival side protection screw 50 mm chrome (Puch)
Manufacturer: swiing® revival parts · Surface: chrome-plated · Surface: galvanized (blue) · Color: Chrome · Material: Plastic · Material: Steel · Drive: Slot · Drive: Triangular head · Thread type: M5x0.8 (standard thread) · Total length: 62.7 mm · Thread length: 50 mm
CHF 2.90
swiing® revival 17" rear fender primed | Puch Maxi N
Manufacturer: swiing® revival parts · Material: Steel · Surface: primed · Color: black · Folding the ends: closed folded · Folding the ends: not folded · Shape of the mudguard: angular · Wheel size [inch]: 17 " · Total length over ends: 625 mm · Mounting type: Nuts & bolts · Scope: 940 mm · Wide mudguard profile: 82 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 285 mm
CHF 33.90
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Rolling circumference: 1448 mm · Number of chain links: 114 pcs · Chain lock type: Spring lock · Ø bore: 4.05 mm · Ø Pin: 4 mm · Color: gray
CHF 18.90
swiing nozzle set M4 (44 - 54) Bing 18, Bing 85
Manufacturer: swiing · Material: Brass · Component group Carburetor: Spraying · Quantity: 6 pcs · Carburetor type: 17 Catalyst · Carburetor type: 18 Catalyst · Carburetor type: 85 · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M4x0.7 (standard thread) · Nozzle size: 44 · Nozzle size: 46 · Nozzle size: 48 · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 54
CHF 15.90
Airsal intake manifold 46 / 47 mm cylinder | Puch
Manufacturer: Airsal · Material: Aluminum · Camouflaged: No · Ø inside: 19 mm · Area of application: Tuning · Total length: 60 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Height flange center hole: 65 mm · Total height: 75 mm · Hole spacing inlet: 38 mm · Ø External connection: 24 mm
CHF 39.90
Collection only possible with online purchase and appointment.
