Vintage grip set made of black rubber for your moped, moped and small motorcycle with automatic transmission.
Thanks to their shape and appealing design, these handlebar grips adapt perfectly to your hands and provide a pleasant riding experience. These grips give your retro and classic bike the finishing touch.
One set consists of one grip cover each with an inner diameter of 22 or 24 mm.
For a manual moped, moped or small motorcycle that requires two grip covers with an inner diameter of 24 mm, this item must be ordered twice. The handle ends are closed except for a small hole, but can be opened individually if required (e.g. for mounting a side mirror).
Total length: 123 mm
Ø outside (operating surface): 33 - 39 mm
For easier installation, the rubber grips can be placed in warm water or sprayed on the inside with GPO Grip Spray. If you dare, you can also use mummy's hairspray.
Mounting material for the grip covers, as well as other rubber grips and complete grip sets can be found in the accessories section.
Excellent quality from the premium custom brand 66HEROES.
| Manufacturer | 66HEROES |
| Material | Rubber |
| Surface | raw |
| Total length | 123 mm |
| Color | black |
| Ø inside | 22 mm, 24 mm |
| Ø outside | 33 mm, 39 mm |
Ratings
Accessories & related products
Lusito handle set automatic aluminum black (short gas)
Ø inside: 22 mm · Ø inside: 24 mm · Manufacturer: Lusito · Housing material: Aluminum · Material: Rubber · Surface: powder-coated · Material lever: Aluminum · Color: black · Color: orange · Color: silver · Number of components: 6 pcs · Total length: 130 mm · Total length: 150 mm
CHF 49.90
Explore categories from Handles & fittings
Moped fans also bought
Hot 
swiing® ingenious exhaust 22 mm camouflaged 2-piece | Puch Maxi S, N
Manufacturer: swiing® ingenious parts · Ø outside: 59 mm · Total length: 910 mm · Color: Chrome · Material: Steel · Surface: chrome-plated · Ø Silencer: 54.5 mm · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Number of fixing points: 4 pcs · Ø Flame tube outside: 22 mm · Exhaust type: Flute · Flame tube attachment: Flange
CHF 149.90
Hot
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 3.94 mm · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 128 pcs · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Ø bore: 4 mm
CHF 12.50
Inox
Hot
GPO license plate holder Inox (CH version)
Width: 105 mm · Thread type: M5x0.8 (standard thread) · Height: 5.3 mm · Manufacturer: GPO · Total length: 145 mm · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Ø mounting hole: 5 mm · Thread length: 8 mm · Mounting type: Nuts & bolts · Hole spacing: 30 mm · Hole spacing: 50 mm · Number of fixing points: 2 pcs
CHF 10.90
GPO 15 mm carburetor tuning | Puch
Nominal diameter: 15 mm · Manufacturer: GPO · Material: Aluminum · Area of application: Tuning · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Total length: 66 mm · Width: 50 mm · Height: 95 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: No · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
CHF 64.90
Not so nice 
15 mm intake manifold | Puch E50
Ø inside: 14.5 mm · Material: Aluminum · Camouflaged: Yes · Area of application: Tuning · Total length: 47 mm · Hole spacing inlet: 38 mm · Height flange center hole: 43 mm · Mounting type: Screws · Ø External connection: 20 mm · Number of fixing points: 2 pcs · Total height: 54 mm
CHF 11.90
GPO license plate holder Inox black (CH version)
Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Surface: varnished · Color: black-matt · Total length: 147 mm · Width: 105 mm · Height: 6 mm · Thread type: M5x0.8 (standard thread) · Mounting type: Nuts & bolts · Number of fixing points: 6 pcs · Ø mounting hole: 5 mm
CHF 12.90
Not in stock
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
