
A pair of yellow anodized aluminium footrests for your moped, moped or small motorcycle.
The two grids have deep grooves for a good grip, as well as a point at the outer end.
With the built-in grub screw, the two footrests are either mounted on a shaft or on the bolts that replace the pedals.
You can find both products in the accessories section below.
| Manufacturer | 66HEROES |
| Ø outside | 34 mm |
| Material | Aluminum |
| Surface | anodized |
| Color | yellow |
| Total length | 126 mm |
| Depth | 62 mm |
| Ø inside | 16.1 mm |
| Reflectors | No |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Area of application: Chemistry · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
CHF 21.90
CHF 2’190.00/l
Moped fans also bought
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Drive: Slot · Total length: 6 mm · Screw head: Lens head · Thread length: 4 mm · Ø outside: 5 mm · Number of components: 2 pcs
CHF 2.00
GPO sprocket 42 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Color: black · Surface: powder-coated · Material: Steel · Ø mounting hole: 6.5 mm · Number of teeth: 42 pcs · Ø inside: 94 mm · Hole spacing 2: 68 mm · Number of fixing points: 6 pcs · Hole spacing: 36.5 mm · Cranking (offset): 8 mm · Ø bolt circle: 105.5 mm
CHF 19.90



