Interchangeable number holder for your moped, moped and small motorcycle.
Everyone who owns more than one moped and doesn't ride around on two at the same time like Jean-Claude Van Damme should definitely get this practical interchangeable number holder.
This way, one and the same number can be changed from one moped to the next within seconds. This saves time and money.
The number holder system impresses with its sophisticated yet simple functionality.
The spring plate is either attached directly to the license plate or to a license plate frame as listed in the accessories.
The black anodized aluminium block with the corresponding recesses is mounted directly on the moped frame.
With light pressure and a little momentum, the number is pushed smoothly into the locking position. This is bombproof - even in snow, rain and strong winds.
Scope of delivery as shown in Figure 1.
Figures 3 & 4 illustrate the mounted number holder.
This table gives you an overview of how many mopeds can be mounted on a license plate in the relevant cantons of Switzerland and Liechtenstein.
| Aargau | 19 |
| Appenzell A.-Rh. | 1 |
| Appenzell I.-Rh. | 5 |
| Basel-Landschaft | 99 |
| Basel-City | 99 |
| Bern | unlimited |
| Freiburg | unlimited |
| Genève | 2 |
| Glarus | 1 |
| Graubünden | unlimited |
| Jura | unlimited |
| Liechtenstein | 2 |
| Lucerne | 99 |
| Neuchâtel | 2 |
| Nidwalden | 30 |
| Obwalden | 30 |
| Schaffhausen | 50 |
| Schwyz | unlimited |
| Solothurn | unlimited |
| St. Gallen | unlimited |
| Ticino | unlimited |
| Thurgau | unlimited |
| Uri | 1 |
| Waadt | 2 |
| Wallis | unlimited |
| Zug | 19 |
| Zürich | 19 |
Excellent quality from the premium custom brand 66HEROES.
The following video explains the details and installation of the replacement number holder in detail:
| Manufacturer | 66HEROES |
| Material | Aluminum |
| Surface | anodized |
| Color | black |
| Mounting type | Nuts & bolts |
| Number of fixing points | 2 pcs |
| Universal | |
| Puch | |
| Sachs | |
| Pony / Cilo (Beta 521 & 512) | |
| Piaggio | Ciao - PX Si Bravo / Super Bravo Boxer Grillo |
| Zündapp Belmondo | |
| Solex | |
| Tomos | |
| Bye Bike | |
| Alpa Chopper / Turbo |
| Cilo | |
| DKW | |
| Fantic | Issimo |
| Garelli | |
| Honda | |
| Hercules | |
| ILO / JLO | |
| Kreidler | Flory MF Foil |
| Malaguti | |
| MBK | |
| Miele | |
| Motobecane | |
| Monark | |
| Peugeot | |
| Victoria | |
| Yamaha | |
| Zündapp |
Accessories & related products
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Thread length: 8 mm · Mounting type: Nuts & bolts · Color: silver · Total length: 145 mm · Width: 105 mm · Number of fixing points: 2 pcs · Height: 5.3 mm · Ø mounting hole: 5 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Thread type: M5x0.8 (standard thread)
CHF 10.90
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Contents [ml]: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Color: blue · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
CHF 21.90
CHF 2’190.00/l
66HEROES interchangeable number holder set
Manufacturer: 66HEROES · Material: Aluminum · Material: Spring steel · Surface: brushed · Surface: electropolished · Color: black · Thread type: M5x0.8 (standard thread) · Mounting type: Bayonet lock · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
CHF 29.90
Not in stock
GPO license plate holder Inox black (CH version)
Manufacturer: GPO · Thread type: M5x0.8 (standard thread) · Material: Chrome steel (known as Nirosta®) · Surface: varnished · Color: black-matt · Ø mounting hole: 5 mm · Number of fixing points: 6 pcs · Total length: 147 mm · Width: 105 mm · Height: 6 mm · Mounting type: Nuts & bolts
CHF 12.90
Moped fans also bought
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Thread length: 8 mm · Mounting type: Nuts & bolts · Color: silver · Total length: 145 mm · Width: 105 mm · Number of fixing points: 2 pcs · Height: 5.3 mm · Ø mounting hole: 5 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Thread type: M5x0.8 (standard thread)
CHF 10.90
Bumm mirror round Inox
Manufacturer: Bumm · Material: Chrome steel (known as Nirosta®) · Material: Steel · Surface: chrome-plated · Ø mirror surface: 107 mm · Color: Chrome · Ø mirror rod: 8 mm · Mirror rod length: 300 mm · Thread size: M8 · Clamping diameter: 22 mm · Total length: 360 mm · Thread type: M8x1.25 (standard thread)
CHF 24.90
Hot 
VEC electronic ignition coil (replaces ignition coil, capacitor & contact breaker)
Cable length: 140 mm · Cable length: 420 mm · Manufacturer: VEC · Color: black · Ø Internal flywheel: 90 mm · Area of application: Original · Area of application: Performance · Area of application: Standard · Ø cable holder: 5 mm · Height: 48 mm · Number of fixing points: 2 pcs · Total length: 77 mm · Ø mounting hole: 4.6 mm · Hole spacing: 54 mm · Place of use: Internal (in the ignition) · Mounting type: Screws
CHF 99.90
Not in stock
66HEROES interchangeable number holder set
Manufacturer: 66HEROES · Material: Aluminum · Material: Spring steel · Surface: brushed · Surface: electropolished · Color: black · Thread type: M5x0.8 (standard thread) · Mounting type: Bayonet lock · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
CHF 29.90
Not in stock
Collection only possible with online purchase and appointment.
