All wish lists
Carousel Image 1
Carousel Image 2
Carousel Image 3
Carousel Image 4

For: Sachs

15484

38 mm cylinder kit square inlet | Sachs 50/3, 50/4

Home
| Motor
| Cylinder
| Cylinder & racing set
CHF 129.90

Incl. 8.1% VAT.

Complete cylinder kit for Sachs 3- and 4-speed engines with foot shift.

Für 32 mm flame tubes with an M40x1.5 mounting nut.
Ø outside: 119 mm

Should be used with a 17 mm Bing carburetor.

To be able to mount this cylinder on a Sachs 50/2 engine, various adjustments must be made.

Details

MaterialGray cast iron
Surfacesandblasted
Displacement50 ccm
Area of applicationTuning
Nominal diameter38 mm
Crankshaft stroke42 mm
Number of fixing points4 pcs
Thread inletM5x0.8 (standard thread)
Hole spacing inlet31 mm
Ø piston pin (B)12 mm
Outlet typeUnion nut
Thread outletM35x2 (standard thread)
Hole pattern [mm]51 x 40
CamouflagedNo

Suitable for the following models

Sachs

50 (Fahrtwind, 1.25 / 1.5 hp, DE)

50/3

50/4 - MLFB (2.6 PS), LKH (4.5 PS)

Moped fans like you also bought:

swiing® revival air filter screen Ø 52 mm original
undefined

For: Universal · Puch · Sachs · Zündapp Belmondo

10572

swiing® revival air filter screen Ø 52 mm original

Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Color: silver · Area of application: Standard · Ø outside: 52 mm · Height: 10 mm · Camouflaged: No

CHF 15.90

swiing® revival gasket cylinder base 0.3 mm | Sachs 50, 50/3, 50/4 DE engines
undefined

For: Sachs

12001

swiing® revival gasket cylinder base 0.3 mm | Sachs 50, 50/3, 50/4 DE engines

Manufacturer: swiing® revival parts · Place of use: Cylinder base · Material: Oiled paper · Thickness: 0.5 mm · Hole pattern [mm]: 40.5 x 51

CHF 3.50

swiing® revival clamp body reinforced | Sachs 503 AB, AC, ADV, ABL (A1196)
undefined

For: Sachs

16071

swiing® revival clamp body reinforced | Sachs 503 AB, AC, ADV, ABL (A1196)

Manufacturer: swiing® revival parts · Surface: Hardened · Material: Steel · Height: 10.9 mm · Number of teeth: 24 pcs · Ø outside: 26.8 mm · Ø inside: 19 mm · Pony OEM number: A1196 · Sachs OEM no.: 0232 186 100

CHF 64.90

MBR plain bearing 15/17/21.75 Clutch basket "Racing" | Puch E50
undefined

For: Puch

17717

MBR plain bearing 15/17/21.75 Clutch basket "Racing" | Puch E50

Manufacturer: MBR · Material: special bearing bronze · Nominal diameter inside: 15 mm · Ø outside: 17 mm · Ø inside: 15 mm · Total height: 21.8 mm

CHF 29.90

DR piston 43 mm (10 mm KoBo) | Piaggio Ciao, SI, Bravo, Boxer
undefined

For: Piaggio

18316

DR piston 43 mm (10 mm KoBo) | Piaggio Ciao, SI, Bravo, Boxer

Manufacturer: DR Racing Parts · Nominal diameter: 43 mm · Ø outside piston (A): 42.9 mm · Compression height (C): 26.1 mm · Curvature (D): 2.4 mm · Total piston height (E): 50.5 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.2 mm · Ø piston pin (B): 10 mm · Piston weight: 82 g

CHF 66.90

Hot Hot
66HEROES speedometer bracket Ø 48 mm chrome
undefined

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Zündapp Belmondo

18612

66HEROES speedometer bracket Ø 48 mm chrome

Manufacturer: 66HEROES · Material: Aluminum · Surface: chrome-plated · Color: Chrome · Ø outside: 52 mm · Ø inside: 48.3 mm · Ø mounting hole: 8.5 mm · Depth: 50 mm · Total height: 52 mm

CHF 37.90

swiing diode insert rear light 12 V (Version 2.0)
undefined

For: Universal · Puch · Sachs

21253

swiing diode insert rear light 12 V (Version 2.0)

Manufacturer: swiing · Test mark: none · Tension: 12 V · Color: red · Performance: 5 W · Width: 60 mm · Height: 41 mm · Bulb holder: LED (permanently installed) · LED: Yes

CHF 29.90

swiing® revival pinion shaft | Sachs 503 2AL, 2BL (A1322)
undefined

For: Sachs

24156

swiing® revival pinion shaft | Sachs 503 2AL, 2BL (A1322)

Manufacturer: swiing® revival parts · Material: Steel · Surface: blank / oiled · Thread type: MF12x1 (fine pitch thread) · Toothing type: straight toothed · Recording type: Ø15 x SW12 · Number of teeth: 4 pcs · Ø outside: 15.4 mm · Ø inside: 12.9 mm · Total length: 91.5 mm

CHF 73.90

Brake caliper, brake hose & brake lever for EBR forks

Universal

24362

Brake caliper, brake hose & brake lever for EBR forks

Material: Cast aluminum · Surface: varnished · Thread type: M8x1.25 (standard thread) · Color: gray · Ø Handlebars: 22 mm · Number of fixing points: 4 pcs · Mounting type: Nuts & bolts · Hole spacing: 32 mm · Hole spacing: 60 mm · Brake lever length (lever length): 162 mm · Cable length: 900 mm

CHF 164.90

swiing® ingenious brake disk "Wave"
undefined

For: Puch · Sachs · Piaggio · Zündapp Belmondo

25673

swiing® ingenious brake disk "Wave"

Manufacturer: swiing® ingenious parts · Material: Steel · Ø outside: 225 mm · Ø inside: 92 mm · Number of fixing points: 5 pcs · Ø bolt circle: 105.5 mm · Thickness: 3 mm · Ø mounting hole: 8.3 mm · Mounting type: Screws

CHF 126.90